Ipod touch 4 gen suddenly not connecting to macbook and not showing when its charging. Help pleassseeeeee

I also tried a hard reset ( I read in a discussion that it usually fixes most problems), but nothing when it askes me to connect it to itunes it does not work.

Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
  How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
iOS: Device not recognized in iTunes for Mac OS X
Try on another computer

Similar Messages

  • My iPod Touch 3rd Gen, Does not show up on iTunes Devises  4.3

    My iPod Touch, 3rd gen, does not show up on iTunes 10. I feel I have exhausted al avenues. Diagnotics passed all tests but - The Connection Not Found. Continued on with there Help suggestions with no success.

    Which version of iTunes are you using?
    Stedman

  • My ipod touch 4th gen does not show up in iTunes when I plug it in.  It charges, but I cannot sync it or add new music.  I am using iTunes on a MacBook.

    My ipod touch 4th gen does not show up in iTunes when I plug it in.  It charges, but I cannot sync it or add new music.  I am using iTunes on a MacBook.

    Which version of iTunes are you using?
    Stedman

  • My (up to date) iPod touch 5th gen is not showing up in (up to date) iTunes on my Windows 8.1 laptop.

    I have recently bought a new laptop and downloaded iTunes to it right away. I have not been able to connect my iPod touch 5th gen to iTunes at all since then. I have updated both the iPod and iTunes completely and both are up to date. I tried different iPods of the same generation and they haven't connected either. I have tried using different cables and all my usb ports. I tried resetting my iPod and re-installing iTunes to my computer. My iPod is showing up in my computer but not under devices in iTunes. Can anyone help?

    Check out the troubleshooting steps at this link from support: http://support.apple.com/kb/TS1538
    For me it was step 5 (Apple Mobile Device USB Driver) that solved the problem of none of my iOS devices being recognized by iTunes in the 11.3.1.2 version and Windows 8.1

  • My Ipod Touch 3rd Gen is not showing up on itunes

    I have an Ipod Touch 3rd generation I restarted the i pod and erased its content. The ipod will not tun on or show up on i tunes . It will go to the apple icon then the dotted rottating circle to show it is loading appears but then it frezzes. Ive gone through trpubleshooting on apple's website but still no change.  what is wrong? Pleeeaaasee help!!!!

    See:
    iOS: Device not recognized in iTunes for Windows
    Does it charge? If not it could be the cable or USB port

  • Ipod touch 5th gen suddenly not compatible with volvo s60 through usb

    My 5th gen ipod touch is suddenly not working in 2013 Volvo s60.  When I plugged it in via usb this afternoon (as usual), message came up on screen saying ipod was not compatible with this accessory.  I've already tried resetting it by pushing home and power button at same time but it didn't work this time.  Worked fine until today.  Any thoughts?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try another cable if it is a Lightning to USB cable
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       

  • IPod Touch 1st gen suddenly not recognized in Windows

    I have Windows Vista, and the 1st gen ipod touch. It was syncing last night but this morning I plug it in, and it doesn't sync. I get an error message from Windows saying it couldn't recognize the device, and to reconnect it. I un-plug then re-plug it back in, but I get the same error...oddly enough my iPod is not showing any error messages on its screen at all. I read the troubleshooting article and preformed the steps, with no help.

    I'm trying two things, since we discovered a major part of the problem was my connector. I switched cables with my sister and her computer immediately synced my iPod.I bought a new cable ut now back home, my iPod doesn't do anything. It just charges, doesn't show up anywhere, no 'new hardware' notification shows up. So I will try uninstalling everything, just what about if I have Quicktime Pro? Will I have to re-enter my registration code into it again?

  • IPod touch 3rd Gen. will not show up iTunes or My Computer

    I have reinstalled iTunes, I have tried recovory mode, I have the latest model, I've tried using other USB ports, I've done just about anything I can. I have had this iPod for like 3 years and have never had an issue. Now all the sudden it will not connect to the computer or show up in itunes. It does charge in a wall charger though. How do i fix this?

    Hi
    I have posted just recently with a similar problem [although I suspect you are using Windows rather than OSX by your reference to device manager].
    In my post I asked if iTunes 10 supports the 2nd gen nano as I am starting to suspect that it doesn't. Have you recently upgraded to 10?
    LF

  • Ipod touch 4th gen stuck on connect to itunes and itunes doesn't detect the ipod. tried all options the wedsite gave me nothing is working

    I have tried everything that apple.com has told me. I have watched countless videos. I'm at a complete loss. I just want my ipod to work without destroying my computer.
    This "connect to itunes" screen is driving me nuts.
    Please HELP!!!

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My iPod Touch 5th Gen is not showing up on iTunes

    How can i get my iPod to show in the itunes store on my pc?

    See:
    iOS: Device not recognized in iTunes for Windows
    Does it charge? If not it could be the cable or USB port

  • My iPod touch 5th gen does not respond properly when charging?

    Having real issues with my iPod touch 5th gen touchscreen not responding when it's on charge. Parts of the screen go dead or need several taps etc. Tried removing case etc. made sure I'm using included charger and directly to the mains not on an extension. Is it faulty?

    Some other users have reported same problem. I have not heard of a resolution. You can try:
    - Using another cable
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

    I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

    try to restore in itunes bye putting in recovey mode turn the ipod off press the home button and plug in the ipod into the computer. an itunes shuld see it in recovery mode and click restore. and that should do the trick.

  • HT201412 My ipod touch (3rd gen) is not responding at all. It wont turn off. It wont go into sleep mode. it wont connect to the computer or anything at all. also does not responed to touch. What do i do to make it work again?

    Hi. My ipod touch (3rd gen) will not turn off or resond to anything and will not connect to a computer. the screen will not go into sleep mode and i dont know what to do. help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My ipod touch 5th gen will not connect to itunes, but my computer registers my ipod. i have tried placing my ipod in recovery mode, uninstalled and reinstalled itunes, and restarted my laptop but my ipod will not connect to my itunes..... help ._.

    My ipod touch 5th gen will not connect to itunes, but my computer registers my ipod. i have tried placing my ipod in recovery mode, uninstalled and reinstalled itunes, and restarted my laptop but my ipod will not connect to my itunes..... help ._.

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • My Ipod touch 4th gen is not updating.

    My Ipod touch 4th gen is not updating.  I've tried the standard upgrade procedures.  It is also not recognized by my pc (when connected to a pc it does not even show a device is connected)  The last update was 4.3.3 any suggestions?

    Try:
    - Reset the dock
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    Otherwise you are out of luck. Apple is not making any more update for the 4G.
    Also check with Phillips. Maybe they have an firmware update available

Maybe you are looking for

  • How to attatch sub vi . can we do it the same way as we call functions in C and return values to the main vi?

    I am creating a Vi. I want to do a sub function. I want to connect a switch to a toggle flip flop so need to  use a push button switch in the input  but at the same time take its output to a true/false loop and execute it according to the ourput of t

  • ACR INTERPOLATION Q

    Simple Question (sorry I have not gotten the latest book yet - if the info is there). When I use a higher MP DSLR like the Canon 5D Mark II...  I only get one option to uprez (from 21. to 25.2) in ACR 6.1. I want to know if in this situation (choosin

  • Import Mini DVD's

    I have a new imac G5 slot loading & an iMac G4 tray loading computer. I hear it is possible to put the Mini DVD's into the G4 for extraction with 3rd party software? Anyone out there have any experience with this? The camera I'm using is a Sony DCR D

  • Quantity Material , FI Document NO, General Ledger Account No in SAP Table

    Hi, I want to extract the details Quantity, Material , FI Document No, General Ledger Account No from SAP Table.To extract the data from GL is verfy difficult and time consuming. please help Regards Nikunj Edited by: NIKUNJPATEL on Mar 28, 2010 11:31

  • External debugger for other frontend systems!?

    Hi, I am working on one issue, I.E. There is dotnet front end page --- where I am getting some error(not syntax or any its functionality error) And the coding part behind this functionality is done in RFC function module! How can I find out this func