Ipod touch 4 with composite av cable
i got the composite av cable for my ipod touch 4 but it makes only the sound of the video on my tv. what do i have to do to see the video too? i don't have the possibily to make any settings for the tv output on my ipod touch and don't know what i'm doing wrong. i hope you can help me. perhaps it is important, i'm living in germany.
- What app are you trying to use? TV out (video) only works with specfic apps that support it. The Video app that came with the iPod supports TV out.
- Do you have the correct input selected on the TV?
Similar Messages
-
HT1459 audio but no vidio from tv with composite av cable . ipod 4th gen.
audio but no vidio from tv with composite av cable.ipod 4th gen
Is this with ios7?
https://discussions.apple.com/message/23288493?ac_cid=tw123456#23288493 -
PC Won't Recognize iPod Touch 5G with iOS 7.0.2
I'm having problems transferring photos on my iPod Touch 5G with iOS 7.0.2 to my laptop running Windows Vista.
When I connect the USB cable from my device to my laptop, iTunes opens and begins syncing with my device and that's all it does. Autoplay won't open. When I manually check to see if my iPod Touch is listed on my PC (Start > Computer), it's not listed. Help!Maybe:
iOS: Unable to import photos to computer -
since i have upgradet my ipod touch 3g with the new 5.0.1 version, i can`t upload music or pictures or apps or anything else. the synchronize button is gray and allows nothing. the i tunes version is 10.5.3 ... please help me!
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again. -
IPod touch 4G with interferance on 1 channel when connected in my car
I have an iPod touch 4G with interferance on 1 channel when connected to my VW Golf (2009) using VW cables and a RNS510 stereo system. I can only listen to it if the balance is full left channel! Tried it in another car and it is fine. Tried my sons 2G touch in my car and that is fine. VW say the stereo is fine? I used the same settings as the VW technician's iPod his was OK and mine wasn't. Any ideas how to fix this?
ThanksTry turning off your iPod and turning it back on. It might Help.
-
How to watch my ipod touch videos with apple tv
I am just trying to watch my ipod touch videos with apple tv.. how I can do that?
this is an user forum apple dont read or write here
if i were you i would restore it -
Synch my ipod touch 4 with a new hard drive
I have a new hard drive - the old one crashed - how can I synch my ipod touch 4 with the new drive?
= Transfer iTunes puhases to the new computer:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- Transfer other music using third-party program like one of those discussed here:
Copy music from Ipod to new computer...: Apple Support Communities
- Make a backup of he iPod by connecting the iPod to the computer and right clicking on the iPod under Devices in iTunes and selecting Back Up
- Restore the iPod from that backup.
If you are in the USA you can also redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Have iPod touch 4 with extensive music list. How do I transfer it to the cloud so my other devices can play the music? I subscribed to ITunes Match, but it's not functioning
Troubleshooting Match
http://support.apple.com/kb/TS4054
Subscribing to Match
http://support.apple.com/kb/HT4914
Match for the iOS devices
http://support.apple.com/kb/HT5637 -
There's a logo that pops up on my ipod touch screen with the logo Itunes and the USB cord but is unable to connecct with iTunes...what should i do?
Resolve communication issues
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build". -
Why wont my old ipod touch sync with itunes 11.3 anymore?
why wont my 2nd generation ipod touch sync with itunes 11.3 on windows xp?
See if this helps:
http://support.apple.com/kb/HT1207 -
Brand new Ipod touch G4 with sound only in one earbud
I have a brand new Ipod touch G4 with sound only in one earbud. I have tried different types of headphones, but get the same result. If I jiggle the connector pin, I can get sound on both earbuds, but only on one side when the connector pin is push all the way in.
I have an older Ipod g4 without this problem
any suggestions?Try on your ipod going to Settings-General-Accessibility. Scroll down into Hearing and see that Mono Audio is off. Maybe that's the problem.
-
Another New IPod Touch Owner with Wi-fi Problems
Another New IPod Touch Owner with Wi-fi Problems.
I have been working at this for about 4 hours now with no success and I am getting pretty frustrated, so if it show up in my typing please ignore it. I just don't understand why these multi-million dollar companies can't write a manual or put up a web site that can actually help someone with a problem.
Ok, venting aside.
I am running a gateway computer.
Operating System = XP
Router = Linksys WRT54G
I have two other computers that are working fine with the existing wireless net work and have been for some time.
I'm pretty good with my computer but haven't touched my router since initial set-up and all that was done was a basic set up.
My I-pod is searching for a network and I'm three feet away from it but it doesn't find it.
I printed out my wireless setting. I presume SSID name equals the name box on the ipod-touch
Security = WEP
What seems to be kicking my A$$ is the password. The route setting have never been changed so I would pesume the password should be the default "admin" which I put in (JOIN) and get the "Could not find network" screen
So, I have perused this message board trying to discover and answer to mine, and and apparently many others question with no definitive results.
So I guess what I and everybody else needs is a step by step how to guide on how to discover the info needed and enter in what we need to make this work.
Thanks in advance to anybody that can actually help with this issue. A step by step do this would be nice.Thank you Terpfen for replying, and please excuse my ill temper earlier. I've calmed down some now.
Step: 1 followed step one previously, Main screen, settings, Wi-Fi. Also set power down to 5 min to give I-Pod plenty of time to find network.
Wi-Fi Network Screen.
Wi-Fi ON
Choose a Network (searching indicator) symbol spinning.
Other ...
Ask to Join Networks ON
At this point the I-pod does not find any networks available. The indicator just spins but never returns any results. I am 3 feet for my WRT54G router.
Hence the easy connect isn't connecting.
The next step. is to manually set-up the connection.
Main screen, setting, Wi-Fi, Other.
press "Other" which brings up two fields
Name __________
Security ___________
First Question? Which Name are they looking for. when I went to my router 192.168.1.1 It has the name linksys. However, when I go to my Wireless Network setting it has the name * ???? * which is different than Linksys router.
Now, since one of the goals here is file sharing I presume I should be using the Wireless Network settings name. (which I have tried.)
Next is security, Wireless Network setting indicate setting for WEP Once this is selected you then back-up to the "Enter Network Setting Screen" and you now have a password line added.
Now I have never set a password for the router so the password for the router is the default Password "admin" And I don't recall ever setting a password for my network setting. But, I only use about three different passwords and a cycled through them still with no success.
So, I need some expert advise on how and where to find the info to input into the required field to work or what I need to reset in my router to make this work.
Thanks again for anyone who has constructive input to resolve my and probably many other peoples issues with this problem. -
Has anyone tried syncing the new iPod Touch 4 with OS 10.4.11?
I know the "official" Apple spec's state the new iPod Touch 4 are
for it to sync with OS 10.5.8 and use iTunes 10 .... but has anyone been
successful in using the new iPod Touch 4 with OS 10.4.11 and iTunes 9.2.1?Does iTunes see the iPod? If not
iOS: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows
You need iTunes 10.7 or later on the computer
The iPod touch uses different drivers than the Nano -
Will Ipod Touch work with Windows 8
Will IPod Touch work with Windows 8? Why is that not even a listed option in the help feature?
Apple has just not got around to revising the documentation to reflect Win 8. Just use instructions for Win 7
-
HT201335 does the Ipod touch work with the airplay mirroring
Does the Ipod touch work with airplay mirroring?
No. Only iPhone 4S and iPad (2nd or 3rd Gen) as it requires more processing power. You can still use airplay with your device though.
Maybe you are looking for
-
Itunes corrupt version error message. tried to re-download itunes and same error message
My itunes gives me an error message saying "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes" I tried to download from their site, and when i try to install it, it says "thank you for downloading iTunes" but it
-
Looking for function module to update User data
Hi All, I'm looking for function module/base table to update data into User (User-Specific Data) data. You can notice it under PRTE t.code. Thank you. Regards Kishore
-
Linking Endnote X4 with WORD 2011 for mac.
My Endnote X4 software does not show up in my toolbar of WORD 2011. How do I tackle this problem?
-
Use commitKey to change value in next field
if (event.commitKey == 3){myTrustedFunction(this);} So I want to run this function on a specific field after tab is used in this field. Instead of this I would like to use var school=doc.getField("SCHOOL NAME");How can I run this function on this spe
-
I need to replace a cracked screen on the 4s help!
any suggestions on how to replace cracked screen on iphone 4s