IPod Touch 4G - Disabled; Connect to iTunes Fix - Please ASAP
My iPod (iPod Touch 4G) got disabled because I forgot the password and it says connect to iTunes and when I do it comes up with error please enter lock code before you can use your iPod with iTunes. Please help ASAP. I am taking links, videos, and especially throughout text instruction.
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Your iPod will be erased.
Similar Messages
-
hi, my daughter hers ipod touch is disabled connect to itunes after say its itunes couldnot connect to the "ipod touch" because its is locked with a passcode please help how to fix connect...i did turn off her ipod touch put usb back on there same in doenot say still ipod is disabled i dont understand please help how???
If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New. -
My Ipod touch says disabled connect to itunes I try and it says cannot connect it has a passcode that needs to be entered to connect but thats why I have to get into itunes because I can't get in my Ipod what do I do?
Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.
-
My ipod touch says disabled connect to itunes, help
i have a passcode on my ipod touch 4th generation and it says disabled connect to itunes, but when i connect to itunes it come up to insert the passcode on the ipod before i can do anything with it through itunes. i tried turning it on and off but that didn't do anything and i held in on the hold button and the home button the same time to reset it or whatever that does cause i seen it on google, but that didn't do anything either. please help
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
MY IPOD TOUCH IS DISABLED, CONNECT TO ITUNE?
My iPod Touch is disabled. Its says connect to iTune, and did. But it dosent work. The massage shows your iPod touch in LOCKED by passcode. You must unock before you used iTune. But my ipod is disabled how do i enter the password. Pleace HELP!!! me.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.
-
I changed my password, and without knowing it, I typed the wrong numbers, and now I don't know my password. I've tried to connect to iTunes, but it doesn't seem to work. It only brings up the USB cable needs to be connected to iTunes on my iPod screen. Does anyone know how to fix this, because it's frustrating.
Thanks!!Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My ipod touch says disabled connect to itunes but i tunes does not recognize the ipod.
I don't know what to do and itunes is not reading my ipod. I already updated itunes.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
but when I do nothing happens. Can somebody help me please
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
My iPod Touch won't connect to iTunes! Please help!
When I turn on my iPod touch, it tells me to connect to iTunes. When I plug it in, iTunes doesn't recognize my iPod touch. It charges it, but it won't come up in iTunes. I would reset my iPod touch, but my Sleep/Wake button doesen't work. I really don't know what to do. Please help!
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
-
My ipod touch is not connecting to itunes and wont turn on all i get is the apple logo when i turn it on.
How do I fix this?
can anyone help?Start her:
iOS: Not responding or does not turn on -
ipod touch 4g wont connect to itunes or come out of recovery mode, its just stuck on the connect to itunes screen and will not come out, i tried doing a restore but something happened and now it wont finish or do anything else please help and my itunes will not see that its connected. i also tried going though control panel and restarting the service and nothing happens. also i tried redoing the driver but its saying it cannot find any drivers for it
lol ok nvm i fixed it
-
New ipod touch won't connect to itunes
My new iPod touch won't connect to itunes on my iMac. I have several devices already connected to this itunes library, any suggestions? Thanks.
See:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
You need iTunes 10.5 or later and that requires OSX 10.5.8 or later. -
ipod touch will not connect to itunes @ work computer, but will connect to itunes @ home computer? why won't itunes see my ipod at work?
Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart -
My iPod Touch is a 6.1.6
I got it as a gift a couple years ago, so I'm not sure exactly what generation it is. My iPod Touch will not connect to iTunes or my computer, and the "on this iPod" tab is also gone. I can't put anything new onto it and I can't take anything old off of it! This just happened recently as well, as it was working fine up until a couple months or so ago. What can I do?iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
Trying to update apps my ipod touch says cannot connect to itunes store I have internet connection
trying to update apps my ipod touch says cannot connect to itunes store
What is "it" in but it is not connecting with the ipod ?
Maybe you are looking for
-
UCCX 8 - CSD Real Time Display "N/A"
Hello, We are facing an issue with Cisco Supervisor Desktop real time display "Agent Logs - call" and "Agent Logs - state". These two real time displays show "n/a" while select specific agents (some agents it show data as normal). For the agents who
-
Hi, unable to open preferences in Bridge CS4 3;0;0 . Can somebody help please ? Thanks .
-
Only the first page for a particular site prints. All other sites are fine.
I'm running Firefox 10.0.2 on Windows 7 SP1 and when I try to print the web page of the affected URL ( http://windows.microsoft.com/en-US/windows-vista/Connect-to-another-computer-using-Remote-Desktop-Connection ), only the first page is printed. It
-
We're having a problem in our app which I've been able to duplicate using a simple bank account example. In this example we're using BMP, Container managed tx's, and all methods are marked as required. All session beans
-
I recently purchased a cisco AIR-AP1252AG-A-K9 stand alone wireless access point to serve guest users at a reference area. In trying to get this working, I've used the "debug dot1x all" and "debug eap all" commands, but can't seem to see any info. fr