Ipod touch 4G IOS5 play count/last played song doesn't work

I have an ipod touch 4G updated to IOS 5 and itunes updated to 10.5.0.142. From the day I made the upgrade to ios 5 play count/last played song doesn't work.
Someone can help me?
tnx

I have update my ipod touch to IOS5 version 5.0.1 and my itunes to version 10.5.2.11 and the problem persist: play count/last played song doesn't work.
Someone has the same problem? Someone has a way to solve the problem?
tnx

Similar Messages

  • Since updating my iPhone 4 to iOS5, my music stats (play count, last played, etc.) no long sync to iTunes. How can I fix this? Thanks for the help.

    Since updating my iPhone 4 to iOS5, my music stats (play count, last played, etc.) no long sync to iTunes. How can I fix this? Thanks for the help.

    If you have any podcasts in your iTunes library you should see a Podcasts sync setting tab to the right when you connect your phone and click on its name on the left sidebar (see image below).  On this tab check to sync podcasts and sync your phone.

  • Sync play count, last played, and rating with iOS 5

    From other threads (https://discussions.apple.com/message/16563011#16563011 and https://discussions.apple.com/message/16505730#16505730 for example) it is clear that there are some problems with play count, last played, and rating information updating and syncing under iOS 5. I have at least a partial solution. I am posting it here instead of under one of the existing threads because 1) some discussions seem to be confusing the difference between updating the iOS 5 device data and syncing the updated data to the computer, and 2) some of the discussions are focused iPhone, and though the problem appears similar I only have an iPod touch to test the solution on.
    First of all, this is not a new problem. Prior to iOS 5, I would plug my iPod Touch into the computer and not see any play count or last played data for songs I knew I had just listened to. I discovered that if I clicked (in my computer's iTunes display of the iPod) on one song that I had recently listened to, it would suddenly display play count and last played for all the songs played since the last update. I could then transfer this playlist data (more on this in a minute) to the corresponding songs on the computer. Under iOS 5, this no longer works, and in fact causes the new play count and last played data on the iPod to be lost. However, under iOS 5 there is a way to get this information to update, even though you don't see it when you first connect to the computer.
    To make this work, you have your iPod set on Manually manage music and videos under the Summary tab of the iPod settings in iTunes. I have messed around with this for hours, including several restores and resets of my iPod touch, and have found no way to get this to work under various Sync Music options. I have been using the Manually manage mode for years because I use my iPod with numerous different iTunes Libraries on several different external hard drives.
    Here's the trick: Manually manage must be in effect before you connect the iPod to the computer. After your iPod shows up in the iTunes interface on your computer, in the main view (where it shows the different tabs at the top and capacity at the bottom) there is a Sync button at the very bottom right. Click on this and wait for it to go through the Sync steps (don't worry, you're not losing anything), and, voila, when you go to the songs (on the iPod) you have listened to since the last time you connected to the computer, the play count and last played data will be there.
    Unfortunately, it's not a simple matter to get this data synced to the computer, but it can be done. At first I thought that once I got the data to show up on the iPod I could go to the Music tab and Sync Music to get the playlist data to the computer, but this does not work. It will sync the play count and last played data that are on the computer to the iPod, overriding the newer data. The way I have been getting my playlist data from my iPod to my computer without ever changing the Manually manage setting is by using the Copy Tag Info Tracks To Tracks script from Doug's AppleScripts for iTunes <http://dougscripts.com/itunes/scripts/ss.php?sp=copytinforackstotracks>. This isn't hard to download or install or use and copies playlist information very quickly.
    I have never had a problem with play count or last played on my 2nd generation nano, which still works beautifully. As far as I can tell, play count and last played have never worked well on the iPod touch; there are threads in discussions complaining about this from years ago. It would be nice if Apple would recognize that these are extremely important features to many users and make it a priority to make these basics work before (or while) adding a lot of other fancy features.

    Just for posterity in case anyone else ever has a similar problem.
    I found out I can work around my problem, but I have limitations. The only time it'll update the correct songs is after I restore it and then add the initial songs on to the Shuffle. The key is to not ever have a situation where I reshuffle the order of those songs. If I ever shuffle to better alphebatize or categorize things, the sync updating screws everything up. If say Song #3 on my Shuffle's playlist after the intitial transfer gets moved around to being anything other than the third song played, my Shuffle/iTunes will still think that song has been played although the Song #3 I actually listened to after the sync update will be different. Now I have to carefully compose and place what songs I want loaded on since I can't mess around with the playlist setup at all.
    I know Apple support would likely blame my Shuffle for the problem (it's over 6 years old now). But it's funny how this only happened right after I installed 11.0. The update to 11.0.2 did nothing.

  • Problem when syncing: won't update itunes play count/last played etc

    My old 2g shuffle was capable of updating play count/last played and adding songs to the recently played playlist when synced to my itunes.
    Seems my new 3g shuffle can't do this.
    I remember the trick with the 2g was to make sure it was switched off first before connecting/syncing, but I've tried all sorts of different combo's with the 3g and nothing will make it update song stats in itunes.
    How can I make it update my itunes?

    Ok, cool, I figured it out:-) Just in case anyone ever has the same problem, here's a quick rundown:
    Basically it's the same problem you can get with 2nd gen shuffles if you're manually managing songs. So I just unticked manually manage music in the device summary and got the shuffle to sync music from a playlist I created/dumped all the songs I wanted into.

  • The vga adapter (for a Benq projector, for example) is only for Ipod touch 4g? I have an 2g. Doesn't work for this?

    The vga adapter (for a Benq projector, for example) is only for Ipod touch 4g? I have an 2g. Doesn't work for this?
    Thanks in advance.

    The VGA is for the 4G iPod only. The 2G can use the composite and component cables.
    http://support.apple.com/kb/HT1454

  • Is it possible to manually manage music on the iPod Touch and still have your last played info updated?

    Hi, I'm running low on my iPod Touch capacity so have set it to 'manually manage music'. However, when on this setting, it doesn't update iTunes with 'last played' information. Is there any way to enable this? I appreciate it's not a huge issue but it is something I ike.
    Thanks in advance people.

    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    

  • Play Count / Last Played inconsistencies

    I have a smart playlist that simply shows all music that I've never played.
    I set this up to simply show music where Plays=0.
    I've noticed recently that music I know I've listened to is still in the playlist, looking at the screenshot below you can see that I listened to this album in February but the play count is still zero?
    I can get around this by also filtering out music where last played is not in the last 1000 months, but that's a workaround rather than a fix!

    littlestar,
    The Mimico Kid asked a couple of us on another thread if someone could offer some tips with this issue, so I'm here to try.
    With playcounts that iTunes is not able to keep orderly, you may want to reset your entire iTunes library's play counts, or rebuild your iTunes library.
    See if this thread is of any help for you:
    Play count is screwed up- why?
    Something else I just thought of that might do soemthing. Try this:
    1 - Right-click "Recently played" in the left panel of iTuens, click on "Edit Smart Playlist".
    2 - un-check "Live Updating".
    3 - Click "OK".
    4 - Play a couple of songs in the iTunes library (all you have to do is double-click a song, and drag the little location-of-the-song selector to the last couple of seconds, and it will count as a played song when it reaches the end).
    5 - Close iTunes.
    6 - Re-open iTeuns again.
    7 - Right-click "Recently played" again, clicking on "Edit smart playlist".
    8 - Now re-check "Live updating" again.
    9 - Play a couple of songs in iTunes, and close iTuens when this is completed.
    10 - Re-open iTunes. Play a song in it.
    11 - Now, see "Recently played", just to make sure that it now shows what you played a few moments ago.
    See if anything changes with iTunes not keeping your play counts.
    Okay, I'm not sure if that was all useless or far-off the possible problem (I know, "Recently played" and "Live updating" may not have much to do with iTunes updating playcounts), but I guess it's a try. You sometimes never know what iTunes will positively respond to with a problem that's somewhat un-charted ground. (I've seen some strange solutions actually work with issues in iTunes).
    Good luck,
    -Kylene

  • My play count (& last played) does not work after itunes 11

    I've read many posts claiming if you turn off crossfading that you can repair the new play couny/last playedt problem in itunes 11. That does not work for me ( I have never turned on the crossfading ever ).
    Now when I listen to my audio books on a shuffle (has no screen),  I can't see what chapters I have already listened to (when I plug my ipod back into my desktop).
    Any other advice?
    Kate

    Apple needs to recognize this issues immediately, I'm a huge fan of Apple products like paulgarb said, it's a good product cause it works, every tv and mobile device in my home are linked because of homesharing, but now it does not work with no seemingly simple solution to solve the issue anywhere in site. I have always stood by Apple products and always recommend them, however I hope I did not put my foot in my mouth, my father has just spent a good amount of time scanning old family pictures and now he wishes to share them on his tv, tried multiple solutions for him with the devices he already has, none would work (ie streaming through googletv, ps3...) so I told him the simple solution is to just get an appletv for $99, he said fine get it for me for Christmas, usually I have a hard tie getting a gift for him, but now I finally have an opportunity to get him a gift I know he wants, but with homesharing issue apple has yet to acknowledge I feel appletv might be a moot point for him. Im praying that my father has not update his itunes yet. It would a great gift if apple could acknowledge the issue and fix it before the 25th.

  • Has anyone managed to get play count/last played to sync?

    I can live with the podcasts being borked, it's prompted me to use an app (hello iCatcher!) which I had been planning to do for a while. I'm still learning its ways, but it feels a lot more comfortable already.
    The thing that I absolutely cannot understand is how ratings, playcount and last played times are not synchronising. I've a number of smart playlists based on these attributes and I haven't been able to get them to sync up since I enabled Match on my iPhone.
    So I've got an iPhone which I sync with iTunes on a Mac. Everything's patched up to the latest version.
    Has anyone successfully had any successful syncs? The smart playlists are just a joke - I'd expect the track listings to be comparable between devices, but they just aren't.
    This is a beta product which some glaring functionality holes. How Apple can think it's worth paying for is beyond me. The smart playlist functionality has been working seamlessly for years on iTunes ... but it's broken. And I paid for the product that broke it. I'm feeling very let down.

    I haven't managed to get any playcount, ratings etc to sync. There are so many issues with this version of iTunes Match I cannot believe Apple released it.
    The order of tracks in playlists doesn't match iTunes on my Mac, selecting a folder of playlists in iTunes on my iPhone hangs the phone and sometimes crashes it, metadata doesn't sync, some albums are split into 2, etc.
    Looking forward to an update soon.

  • IPod touch 3rd gen spinning wheel plus home button doesn't work. How to fix?

    I have an iPod touch 3rd gen that is stuck on the Apple logo and also has that spinning of wheel death thing. I am trying to enter into DFU mode but won't work due to the home button not working. Is there any other way I can fix this and make it boot back up regularly?

    Try here:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    See if  using thies program will get the iPod in recovery mode so you can restore the iPod
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If not let the battery fully drain. After charging for at least for an hour try again.
    If you can update to iOS 5 and the Home button sill does not work yu can turn on the Assistive Touch Accessibility feature. See chapter 30 of the Users Guide.
    iPod touch User Guide (For iOS 5.0 Software)

  • I just got a new iPod touch 4th generation and the built-in speaker doesn't work. Is it broken? Or do I have to turn it on somehow?

    I'm not sure if I have to turn in on somewhere in settings or is it simply broken.
    Help?

    Try increasing the volue using the volume up-down buttons on the upper left side of the iPod

  • What has to be done in order for your play data--Last Played, and Play Count--to be updated from "cloud" play of your music?  Thanks

    When playing music in the cloud, music on my MacBook's library play data is not updated.  Does anyone know how to make that work, or if it is even possible?  If it's not possible, why even ha

    If you manage the music on your iPod Touch manually the playcount and last played data does not get updated in iTunes. It works that way for all iPod models.
    To solve this problem you can do the following:
    - Create a playlist in which you add all the songs you want to add to your iPod Touch
    - Set your iPod to sync music automatically. On the music tab configure the iPod Touch to only sync the previously created playlist.
    - Sync your iPod Touch.
    Now you can manage the content of your iPod Touch by managing the contents of the playlist and then sync. And most importantly it will update your playcount and last played data.
    Hope this helps,
    Marc

  • Ipod touch can no longer tilt while playing Temple Run or Back Breaker Football

    IPOD Touch can no longer tilt while playing Temple Run or Back Breaker Football or any game where you need to control the tilt or turn.

    Managed to finally factory reset the unit (see my other post).
    Should be OK now.

  • Why my ipod touch 4 becomes hot when i play games?

    hey why is my ipod touch 4 becomes hot when i play games?

    Obviously certain use of the iPod will result in different CPU intensities and cycles. Depending on the threshold, the exhalation of heat may vary from app to app. What I would reccommend is finding a friend who also owns the same device and comparing use of the same game which demonstrates the giving out of heat?
    Is their device just as hot?
    Is there any juddering in the video or general FPS of the app?
    If any of those questions are answered with yes then I would perhap find it advisable to book a slot with an Apple Genius and show this issue to them as they will know whether to replace the device or not.
    Regards

  • Play Count Zero for Songs Previously Played

    Does Play Count reset to zero if a song is not played after a certain amount of time? I have Play Count = 0 for songs that I know I have played.
    I am looking for ideas for why I have zero play count for songs that I have played.

    That's the answer then. Syncing is a "procedure" which, among other things, does all the work for you of finding out how many times each song has been played on the iPod and transferring that information back to iTunes. When you Manual Manage, all you are doing is manually dragging songs on and off, nothing else.
    Phil

Maybe you are looking for

  • Can't send or receive mail from Outlook

    just purchased a wireless router and hooked up recently. Can access the internet & outlook express but can't get my mail from outlook which is my main email account. Message says can't find exchange server. I can access Outlook from my laptop wireles

  • Shared variable RT FIFO (multi element) - Read all at once

    Hi all! I'm trying to collect data from analog inputs on my cRIO with a 1 sec time step. For that purpose I use a Timed loop and a shared variable with RT FIFO enabled (multiple array of doubles). Parallel to the timed loop, I also use a while loop t

  • How do i get my ipod touch to work if i have not used it in a while

    how do i get my ipod touch to work if i have not used it in a while. we have not used it in about 4 months and it does not charge or turn on

  • Change logical port during runtme

    Hi, i have program that read logical port of webservice and i want to know if i can change it during runtime from the default to other logical port , Thanks , Joy Edited by: Joy Stpr on Jul 25, 2009 11:06 PM

  • Foreign Font formatting problem

    I'm using Pages 1.0 When I use a foreign font in my document many of the punctuation keys on the keyboard are used for letters in this language, and it appears that Pages recognizes them still as punctuation and does automatic formatting accordingly.