Ipod touch 4g is not recognized on itunes,and will not sync

My iPod 4G will not sync when it is recognized in iTunes, and it will not play some songs that are already on the iPod, and it is not recognized on iTunes now either.

Hi,
You can update the itunes software and check, that should work.If not you can also try to reset the ipod.

Similar Messages

  • My ipod touch is not recognized on itunes and will not turn on or give me the battery sign. I have tried toubleshooting it by holding down the home button and the sleep/wake button, but it doesn't work. What do I do to fix it?

    My ipod touch is not recognized on itunes and will not turn on or even give me the battery sign that it is dead. I turned it off and it won't turn back on now. The screen is completely black and won't do anything. I have tried charging it over night and nothing happened. It was never near water. I have tried troubleshooting it by holding down the home button and the sleep/wake button, but nothing happened and it didn't work. What can I do to fix it?

    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    For Mac
    http://support.apple.com/kb/ts1591

  • Ipod is not recognized by iTunes and will not sync

    When trying to sync my ipod up with iTunes, it is not recognized as a device by iTunes and cannot be synced up. Any ideas? Thanks.

    I had this issue. Basically, iPhoto would recognize my iPod Touch and my wife's iPhone, but iTunes would not. Thus, I knew it was not the USB cable or ports.
    In one forum, I tried something and it worked.
    In Applications > Utilities > Activity Monitor, I stopped iTunes Helper.
    Then I downloaded and reinstalled a fresh copy of iTunes.
    Once I restarted iTunes and plugged in my devices, they appeared just like they used to.
    Hope this helps.
    Jakers19

  • My IPOD Classic 160GB is now not recognized by iTunes and will not sync

    I have a 160GB IPOD Classic that now will not sync with iTunes. Both the iPod and iTunes have up to date software versions and I am connecting thru a MAcBook Pro running OS X 10.10.2. I have synced this iPod i the past with no problems and now it does not appear in the iTunes source list.
    I have tried the rest options that the Troubleshooting guide suggested and now at a loss for the next step.

    This is a problem caused by 10.10.2, only way to fix it at the moment is to revert to 10.10.1.
    Quite a few threads on it on other sites and only that one solution. Make sure you raise a feedback to apple though.

  • Ipod nano not recognized by pc and will not turn on

    ipod nano not recognized by pc and will not turn on

    iPod not recognized in 'My Computer' and in iTunes for Windows 

  • I have 2 ipod touch's that both have frozen screens and will not reset or show up in itunes. They both froze after trying to update to the latest software version. How do I get them to work?

    I have 2 touch's that froze when trying to update to the latest ios version. Neither respond to restarting the devices. They are also not recognized in windows or itunes. How do I get these to work. I followed all of the instructions on  the apple website and they still don't work. I have verified that I have apple support for mobile devices installed in itunes and my version of itunes is 11.0.1. I am running windows 7 64bit with service pack 1 installed and all of my updates are current. Is anybody else having this problem with their apple devices?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • TS2771 my ipod touch 4th gen is connected to wifi and will not open the app store or any of my social media apps i am logged in to itunes so i have no idea why its not letting me use app store itunes or any social media

    My Ipod Touch 4th Generation is connected to wi-fi and will not open the app store.  Says it cannot connect to iTunes Store.  I can get on the internet but for some reason it won't connect to the app store or the Software Updates.

    Can't connect to the iTunes Store
    For the socal sites, are y using a home network?
    Did it work before?
    Some work networks block sits like social sites.

  • My IPOD touch isn't being recognized by  iTunes and once it was restored it is only showing the iTunes Icon with the connector cable as a picture.

    This happened after trying to "restore"

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • IPod Touch 5th Gen shut down by itself, and will not turn back on?

    I was just on the YouTube app when suddenly my iPod shut itself down, and the battery was well over 50%.
    It will not turn back on, and when I plug it into the charger, nothing changes. Any suggestions?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • My ipod touch it frozen in a apps mode and will not respond how do I correct this

    my ipod touch is frozen on an app and will not respond to anything what can I do to correct this?

    Try here:
    iPhone and iPod touch: Frozen and unresponsive

  • Ipod touch not recognised by Itunes and will not slide to unlock.

    Hi,
    I got my Ipod touch 32GB 3rd gen for christmas last year, my battery ran flat some time last week. When i plugged it into my computer via USB to charge, it charged for a few minutes then stoped. When i looked and tryed to unlock the Ipod, it will not slide to unlock, same with the slide to power off, I have pushed both home and power botton to reset; both plugged into compter and not however after the reset it still will not unlock. when pluged into itunes i get a message saying it needs a full factory settings restore, i start that process, however i am shown an error message which reads "the Ipod software update server could not be contacted. An unknown error occured (1612)".
    Sorry about the long post, can anyone help, has this sort of thing happened with anyone else before?
    Any help would be much appreciated.
    Thanks Alot.

    - See if this program will get it out of recovery mode:
    RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov
    - Next see if you can place the iPod in DFU mode and then restore the iPod.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Ipod Touch Gen 2 connection socket is loose and will not charge or sync.

    Hello MacForum!
    (Skip to the bolded part near the bottom for a summary)
    I bought an 8 gig, 2G Ipod Touch a little under a year ago off of ebay (to save costs, as I was buying one for my girlfriend as well). Both were seemingly brand new, the first one I received was sealed from the factory. I set that one aside for my girlfriend. The second one I received was open but in good condition.
    It had clearly been preowned, but as I said it was in good condition apart from some ware on the usb cord.
    Anyway, fast forward a few months. I am on vacation and my Ipod touch suddenly wont charge. I plug it in, nothing. So I go to radio shack and get one of those go chargers with an ipod touch connector (which are total pieces of crap by the way) and that wouldn't charge it either. So after the vacation we get home and I decide to try my girlfriend's usb cord out, and that doesn't do anything either. So I jiggled it around and it would connect then immediately disconnect, or it would connect but it wouldn't charge, only showing the little plug symbol where the lightning bolt would be.
    So I decided to try my cord again. Same stuff, jiggling makes it work, but it instantly disconnects or goes into that plug mode or what ever (like it's finished charging). It eventually died and I forgot about it and went on happily using my old Ipod Nano Gen 3. Now, months later I am in need of my Ipod touch (I left my nano at my girlfriend's house), so I dig it out, and the usb cord and plug it into my Mac and it's the same stuff pretty much, but I can old charge it if I push the cord's jack up in the Ipod touch's port. I've been wrapping the cord around it longways really tight to try and get it to charge, which is putting more ware on the cord. But it's the only way I can get it to sync or charge...Not only this but the cord doesn't even snap it like other ipod (which is really dumb design in my opinion) so it falls out if I lay it down without wrapping it.
    *So, my Ipod Touch's connection port is loose.* The warranty is long gone. Fixing the port via apple will cost $133 dollars that I don't have to spend on it (Im in college).
    I've searched high and low on the internet and found but two other person that had this issue, each not getting much feedback.
    What are my options? Is there an easy fix? What should I do?
    Message was edited by: KALASH69
    Message was edited by: KALASH69

    There are other repair companies for the touch/iPhone. Google them, you might find a lower price.

  • My iPod touch is stuck on the apple screen, and will not show on the computer.

    I went to pick it up and try to turn it on, and it wouldnt work.  I called and they told me to press power and home buttons and hold.  It worked, now it is stuck on the home screen.

    Is it stuck on the Home screen (Screen showing all your apps) or on the screen that shows an apple?
    Try here:
    iPhone and iPod touch: Frozen and unresponsive

  • My iPod Touch has an Application that is Waiting and Will Not Download!

    I have this application on my iTouch, and it is stuck on Waiting... and it will not download, and I cannot delete it. How can I get rid of it?! Thanks!

    Welcome to the discussions,
    did you already try to reset your device by holding the sleep and home button until the Apple logo comes up again?
    Did you try to tap on the icon until it starts to shake and then hit the little cross to delete it?

  • Ipod nano does not connect to itunes and will not launch. Help please?

    I was about to download some tracks onto my sons ipod nano when got the update message. I wish I had ignored it as my days have been taken over with scouring support, discussions and other sources to get itunes to launch. I have deleted, stopped, repaired and changed files. Nothing happens. No error message. Get the hour glass for couple of secs, thats all. Quicktime launches fine (also updated). Windows sees ipod hardware. What is going on? Granny is giving son an itunes gift card. As I have never allowed him to download tunes he is going to be thrilled............. except he can't use it!!!! I've spent way to many hours trying to find solution. Can anyone help me? Please?

    Sometimes iPod simply won't work off certain USB hubs. If it works directly off the computer, then continue to use that. Your only other choice is to try out other hubs until you find one that works. Is it a powered hub?
    Patrick

Maybe you are looking for

  • RSHIENODETMP Table getting to big

    Hi we are using BI7 found out that this table RSHIENODETMP is getting to big.. from the sap notes we know that repot RSAR_HIETMPTAB_CLEAN could be use, to delete some old data from it. The requirement of this program so it can be run, is using date t

  • Create file global in labVIEW

    I have a VI, which is called in TestStand. The VI starts new executions according to a test.ini files. It means, the VI is running until all the seqeunces are done. In the beginning of this VI I create new FileGlobals. My problem is, that I see the n

  • Wrong filename used when opening image in external editor

    When I select an image and choose Open in External Editor, the filename that is used for the opened image is the original filename given from the camera (DSC1234) and not the filename that I choose when importing (DATECUSTOMSEQ). Why is this? Is this

  • Export naming options by collection sequence number

    My apologies if this was already discussed elsewhere but couldn't find an answer... Here is the situation. I have many photos with names generated on import. They have sequence numbers based on the shooting. But sometimes I want to create a photo ess

  • Result recording not saved

    Hi,    PP QM Gurus,    I m doing result recording for a insoection lot. Once i have saved valuated, locked and saved the results for same results only. When for other results i go through QE12 system is showing me all blanks results. The results whic