Ipod touch 4g new battery will not charge

I replaced the battery and I still get the low battery charging icon. Everything that I read indicated that the problem was with the battery. When not connected, to the charger I cannot get anything to work at all - just a blank screen with no indication that there is any power. The only time I see any indication of life is when plugged in (I see the charging icon and a very low battery image).
This is the same thing I saw before I replaced the battery so I do not appear to have changed anything. Prior to the problem the iPod was powered off for about a month. I thought that the extended time off killed the battery but now I am really puzzled.
Any help would be greatly appreciated.

Bring it back to Apple, they may have not seated the cable/connector correctly, or the cableconnector has an issue, or there is a problem with the charging circuit. Bring in your power adaoter with you as well. Apple repairs come with 30 day warranty

Similar Messages

  • New battery will not charge - have we missed something obvious?

    My DD has just replaced the battery on her PB. When the power supply (less than 3 months old) is attached, the led shows amber but the battery will not charge. I've tried reseating the battery with no effect. Since I purchased it from an apple dealer, I'll be taking it back tomorrow, but I wondered whether there is something obvious we've missed.
    Thanks
    Jennifer

    Thank you both. Yes I know the battery needs to be calibrated, but as you say, to calibrate, you need to charge, which is a non-starter. I'm going to take the whole thing in (again). I suspect the problem that led to the battery needing to be replaced possibly dealt a death blow to something inside. I don't know whether this is relevant, but before replacing the battery, the charger started to make a loud buzzing noise (I understand - I wasn't here), and with the old battery in place the PB kept freezing and/or rebooting. Only with the battery out and just the power supply in would the PB work. The PB is seeing the new battery, it just wont charge it. I just wanted to make sure there wasn't anything else I could do before taking it in.
    Jennifer

  • New battery will not charge

    Had Genius Bar install a new battery as the old one was not charging. New Apple installed battery will not charge either. Light on T-connector always shows green even after SMC reset and battery will not charge. Any ideas?

    Bring it back to Apple, they may have not seated the cable/connector correctly, or the cableconnector has an issue, or there is a problem with the charging circuit. Bring in your power adaoter with you as well. Apple repairs come with 30 day warranty

  • Satellite L655 new battery will not charge

    Satellite L655 new battery will not charge

    Hello halik
    It is not easy to say what is wrong there.
    Have you bought new and original Toshiba battery with the same part number (model number).
    Is new battery recognized by the system?

  • HT1379 New battery will not charge

    I have replaced my battery and reset the SMC.  However, it will still not charge. The battery is brand new

    I suggest a trip to the Apple store and have them either correct the problem or replace the battery.  Do not leave the store until your battery is charging.
    Ciao.

  • Brand new battery will not charge

    I just bought a new battery for my mac book, because I assumed that my old one had died. However the new one won't work either, and now I am out of the country so no genius bar visits are in my near future. The battery status is listed as uninstalled and there is an x through the battery icon in the menu bar. What am I missing? How do I install it?

    Welcome to Apple Discussions!
    Reset the SMC, and PRAM. Here are the articles of significance.
    http://support.apple.com/kb/HT1411
    http://docs.info.apple.com/article.html?artnum=2238
    If it doesn't work, run the hardware test that came with the Mac:
    http://docs.info.apple.com/article.html?artnum=303081
    And if that doesn't work, try to replace the RAM.
    And if that doesn't work, take it in for service.

  • Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

    Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

    If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
    This should take all the music off your phone .Then you can resync the music back on to it.
    If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

  • I dropped my ipod touch and now it will only charge to 20%. It does turn on and the screen I get shows me a picture of a usb cord and a cd with a music note on it that says itunes under it. What does this mean?

    I dropped my ipod touch and now it will only charge to 20%. It does turn on and the screen I get shows me a picture of a USB cord and a cd with a music note on it that says itunes under it. What does this mean?

    connect it to your computer and open iTunes

  • HT1379 my battery will not charge on my new mac

    Battery will not charge.

    You can return a new Mac within 14 days of purchase.
    A new Mac is in warranty for 1 year from the date of purchase.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare.
    You can try resetting SMC.
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • I have a iPod 2nd generation and it will not charge or connect to itunes

    I have a iPod 2nd generation and it will not charge or connect to itunes, I have tried pressing the power button and home botton together and nothing happened.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Also:
    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.

  • My new iphone5 will not charge,any suggestions

    Hello, my new iphone5 will not charge, when I plugged it in to recharge, it was making beeping sounds for about 5 minutes then stopped, any suggestions? thanks

    First of all, you'd probably want to move this question out of iPod classic category to iPod touch one.
    Try reconnecting your cable. Try connecting to your computer instead of wall socket, or vice versa.
    Try resetting, restoring, restoring from backup. Make sure there's nothing wrong with your cable and try another one. The problem might be in your connector or the cable, if so — you might want to ask for a repair in your local Apple Store or Apple Authorised Reseller.

  • My ipod touch go of and will not work untill i plug it back in to a ac power

    my ipod touch go of and will not work untill i plug it back in to a ac power

    You likely have a hardware problem like a dead battery.  To rule out a software problem try the following in order:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod
    If still problem make an appointment at the Genius Bar of an Apple store.

  • I restored my ipod touch however the apps will not sync.  I tried to re-download but I changed my apple id as my old id is no longer a valid email address.  Any ideas out there please

    I restored my ipod touch however the apps will not sync.  I tried to re-download but I changed my apple id as my old id is no longer a valid email address.  Any ideas out there please?

    It might be logical to someone, but not to me. I agree it's a pain.
    How did you change your Apple ID? Creating a new one is not what you want to do, but if you changed the ID associated with your purchases then that might have worked. You would need to sign in with the Apple ID on both your iPod Touch as well as in iTunes. I'm not sure how you changed it but clearly they need to match.
    If it's just your password that is not getting recognized reset it here: http://iforgot.apple.com/
    It will send an email confirmation to the email address associated with that Apple ID. The email address you elect to use might not look anything like your Apple ID. If you don't appear to get an email check your spam filter.

  • My brand new PB will not charge when in standby or when on

    I played with a number of PB's so far and finally have my own but... My brand new PB will not charge when in standby or when on; as soon as I plug the charger into the USB port it detects it and brings the screen up (if in standby) showing the lighting bolt on the battery but it does not charge; the lighting bolt stays but the % charge does not change (or hopefully increase) at all; it will actually decrease (??); the only way I can charge it is when I attach the charger and the PB is powered off… the PB brings the red (or green can't remember) LED on and starts to flash it on off and charges; tried the hard reset with no change; I am running the latest OS release 1.0.8.6067. Has anyone seen this? Is it h/w or f/w? Any Fix?

    Here's a final update on this... the units goes back to its maker or the store sometimes tomorrow... Why? First I tried to understand if this was s/w or h/w related or maybe both before calling support which in the end I did; so I did try a different charger, hard resetting the unit, discharging and recharging etc; nothing helped or fixed the charging in standby; the unit continued to charge only after being turned off and then plugged into the charger. Here's what I learned:
    1. Going through the initial setup and OS update it is quite possible for the unit to NOT load the OS image correctly i.e.  it appears that it loaded the OS and displays the OS version as if it loaded properly when in fact it did not and the image loaded is corrupt. I found this out during a live session with support when they were looking at my PC screen while the PB was connected to the PC only to point out that the Desktop Manager was showing a s/w update being available (1.0.8 bundle 6067) while the unit was reporting 1.0.0 bundle 0. Strange, I thought I already had 1.0.8.6067... after accepting the update, which takes a bit to load, I started more testing, charging, discharging, hard reset (i.e. Volume Up + Power) etc with no positive results to report. This also proved that the USB port is working, both data (PC to PB communication alright) and power (PB displays the plug over the battery bar when the power contact work)
    2. The charger I have works and it is the correct one: P/N PSM09A-050RIM; make sure it is not one of the incorrectly rated chargers some received.
    3. In order to reduce the amount of current the unit consumes when on, you have to run the Video Chat app at least once and acknowledge the (c) page; otherwise this remains as a background app that take more CPU cycles on the battery. After doing this I did notice a slight improvement in the sense that PB did charge some instead of discharging. The problem is that it only charged to about 60% and did not move higher no matter how long I waited (yes I did reset just to make sure it is not the s/w acting up and deciding to not update the power bar)
    4. The way the RIM RMA works is like this: they start the process for you to return the unit back for repair which I understand may take 10 days; you may get a unit to use for this time if so desired, it will be charged to your CC; your unit may get repaired if possible; if not possible to repair, your new unit will be replaced with a refurbished unit; once you get some unit back you need to send the “10 day replacement unit” to RIM to get your CC charge cleared. I find that this program is good for when you can not return the unit to the place you purchased it from. Otherwise it is not good as I do not like getting a refurb for something I consider brand new (not to mention that you may get a unit with a few bright or dark pixels)
    5. Throughout this process I looked at three (3) Playbooks: 2 had bright pixels and were returned immediately; this last one does not charge correctly. No win for me!
    6. The battery lasts approx 4 hours with the unit playing a video clip in a loop and WiFi on with a WEB pulled stop watch running as well (had to allow multi tasking in setup/general).
    Finally, my theory about this problem is that it is h/w related and that it is caused by the noise the board or the display is making when the unit is either on or in standby; a component not soldered properly (cold joint) or out of spec may be the culprit; for example a resistor in resistor divider monitoring the battery voltage or a decoupling capacitor missing or not soldered...

  • My ipod touch 4th generation 32gb will not turn on ive tried holding the on/off button down for 10 and more and also the home button and it will not turn on, i have tried this over several days and still no response

    my ipod touch 4th generation 32gb will not turn on ive tried holding the on/off button for more than 10 seconds and still there is no response i have tried this over several days and nothing is working - i have checked the charger and also have tried charging from the laptop so this isnt the problem - please help as i have not been able to use it fr ages

    Try here:
    iPod touch: Hardware troubleshooting
    Also try placing the iPod in recovery mode and then try to restore via iTunes.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

Maybe you are looking for

  • Helix: Update to Win 8.1 fails

    Hello, I tried to update my Helix to Win 8.1 for several times now. Each time the update fails. The download-process and the installation starts normally. The Helix is also booting sometimes and installing drivers. But then the process fails and I ca

  • Can WEBUTIL_C_API call dll coded in visual basic

    Hi all I wonder if WEBUTIL_C_API supports calling methods in a dll coded in Visual Basic? Or it only supports C, C++ and Visual C++? Thank you

  • Ipad 3 USB tether to my Galaxy SIII?

    If I buy the Apple iPad Camera Connection Kit (MC531ZM/A) will I be able to USB tether my ipad 3 to my Galaxy SIII to get to the net?  If not, is there any adapter that will allow this connection? I have the Sprint unlimited plan, but the wireless ho

  • Solaris 10 x86 failed to install

    Hi, I downloaded Solaris 10 x86 a few weeks ago. I tried installed on a 32-bit old PC and it worked great. I just got a new box. It is an AMD Athlon64 3000+ CPU/motherboard. When I put the disk in, it loaded the installation assistant and gave me thi

  • What Server to use ?

    I'm building a client/server application. The client will be Swing based, and the business logic will all live on the server, accessed via RMI. What is the most appropriate "application server" to host the server side ? Running rmiregistry and the im