IPod touch 4g - No sound (Speaker and headphones)

So my Mum drops my iPod into a toilet (long story), and no it will not play music through the speaker, or through the headphones. There is also no little volume bar thing in the "now playing" section, the volume buttons do sweet F.A, and when you press the square button and slide across to the volume bar, there is not cirlce showing me what the volume level is at. I have only ever seen this behaviour when it is plugged into my docking station, and it still plays music through that, so my conclusion is that it thinks there is always something plugged into the docking port. How can I fix this? Or how much will it cost to get fixed? (I have had it less than a month, no insurance, water damage)

Have you tried drying your iPod like specified here:
http://www.ehow.com/how5356376fix-wet-ipod-iphone.html

Similar Messages

  • Ipod Touch 2nd Gen distorted speaker and headphones

    When i play music on my ipod touch through the inbuilt speaker, there is just disortion. When i play music through the headphones, i can hear the music from thr right side, not the left. to hear music from trh left side i have to turn the volume up fully, the music is low and is disorted. also, when there is nothing playing i hear disortion in the left headphone, when i touch the screen to do anything the disortion changes and becomes worse.
    its not the headphones, because the work fine in other divices
    Message was edited by: daniel2208

    Have you tried drying your iPod like specified here:
    http://www.ehow.com/how5356376fix-wet-ipod-iphone.html

  • I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now?  so far every app I have tried says I need an updated IOS.  This sounds like I now have an apple product paper weight.

    I have an older Ipod touch with 4.2.1 and cannot be updated any further, how do I install apps on it now?  so far every app I have tried says I need an updated IOS.  This sounds like I now have an apple product paper weight unless I want to run out and buy the latest and greatest overpriced apple product. 

    Are you willing to buy a newer iPod? How about the 4g @ 16gb for $199* usd or the 5g @ 32gb for $299*.
    * tax not included.

  • I've updated my ipad to iso7 now the sound is distorted through the speaker and headphones, it is unusable! Is anyone else having this problem?

    I've updated my ipad to iso7 now the sound is distorted through the speaker and headphones, it is unusable! I wouldn't dare to update my iphone. Is anyone else having this problem? Can't seem to find any fixes online?

    A reset should fix it:
    Double click the Home button. Slide up with one finger on ALL your apps to close them.
    Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
    This will reset your device without erasing data, apps or settings.

  • Both Portege R700 speaker and Headphone makes sound

    Hi,
    My name is Anbu, I am using Portege R700 Series. I am facing a strange problem
    When i am using head phone for listening (I am plugging only speaker pin - Green colour), it works properly i.e i am hearing sound from head phone only.
    If I *plug both Mic & speaker pin* of the headphone (Both Red & green colour pin) into the respective slots, both *laptop speaker and headphone speaker makes sound.* Ideally only +head phone should work, not laptop speaker+
    Help me in finding the what is the problem behind this & how to resolve
    Regards
    ANBU

    Hi mate
    Please check the settings in the +control panel -> sound -> recording tab+
    Click right and mark the options: enable hidden devices and enable disabled devices
    Then you should be able to get the properties of mic and stereo mix
    Play around with all the available options.
    <img src='http://img97.imageshack.us/img97/9074/captureyeb.png' width='550px'>

  • Sound is playing both on speaker and headphone

    I have HP ENVY 15-j048tx Notebook PC. when attach heaphone to my laptop the sound is playing both on speaker and headphone. How to solve this please help.
    Thank you.

    Hello Dev2810,
    Welcome to the HP Forums!
    I understand the notebook produces sound from both headphones and speakers. I will do my best to assist you! The only troubleshooting I could suggest in this thread: Headphones plugged in, but speakers are still playing sound
    I provided these steps a while ago I noticed it resolved all instances of this issue, when done properly. Please try the steps and let me know what happens. Thanks!
    Mario
    I worked on behalf of HP.

  • My iPod touch has no sound from music and videos help please

    My iPod touch has no sound at all, help please guys.

    - The restore from backup
    - If still problem restore to factory defaults/new iPod.
    - Last, make an appointment at the Genius Bar of an Apple store.

  • Brand new Ipod touch G4 with sound only in one earbud

    I have a brand new Ipod touch G4 with sound only in one earbud.  I have tried different types of headphones, but get the same result.  If I jiggle the connector pin, I can get sound on both earbuds, but only on one side when the connector pin is push all the way in.
    I have an older Ipod g4 without this problem
    any suggestions?

    Try on your ipod going to Settings-General-Accessibility. Scroll down into Hearing and see that Mono Audio is off. Maybe that's the problem.

  • My ipod touch is having problems with the headphone jack when I rotate a little song stops

    my ipod touch is having problems with the headphone jack when I rotate a little song stops

    Hey Silverdemon, sounds like a short, most likely in the headphones. Try a different set of headphones with this iPod or try the headphones with a different device. If the problem stops with your iPod or it moves to another device, then replace the headphones. If within 1 year of date of purchase Apple will replace the headphones for  free if problem is a defect, not abuse. If the problem continues with a different set of headphones, check the port for damage and foreign debris. If you note debris, attempt to remove it, if damage noted contact Apple and set up an appointment to have it evaluated. if nothing appears wrong, try plugging / unplugging to jack about 12 times maybe corrosion on the contacts if so that should clean it. Next thing to try reset your iPod. After that try restore from backup. Last resort, restore to new. Just make sure you make a full backup to your computer before you restore so no data is lost. If nothing works, contact Apple and set up an appointment to have your iPod evaluated. Good luck, Cheers.

  • I purchased an iPod touch few months back. And i am very upset with the volume output it produces. iPod being an music player, has poor volume quality then my iPhone 3gs. Can anyone pls help. How do i rectify it?

    i purchased an iPod touch few months back. And i am very upset with the volume output it produces. iPod being an music player, has poor volume quality then my iPhone 3gs. Can anyone pls help. How do i rectify it?

    Problem with both the speaker and earphones?
    Have you tried another pair of headphones?
    Yu can try the standard fixes to rule out a software problem:
    - Reset. nothing is lost.
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • I just found my old ipod touch (i think 1st generation) and would like to let my toddler use it instead of my phone.  I am trying to download apps but it say I need to update to 4.3 but it won't let me update.  I have the most recent itunes. any idea why?

    I just found my old ipod touch (i think 1st generation) and would like to let my toddler use it instead of my phone.  I am trying to download apps but it say I need to update to 4.3 but it won't let me update.  I have the most recent itunes. any idea why? I saw a thread saying to purchase the newest software (that was posted a few years ago) I paid 4.95 for the software and it's still saying it can't be updated.  Am I just SOL??

    The 1G iPod can only go as high as 3.1.3. The 1G does not have an internal speaker or volume buttons on the upper left edge.
    Identifying iPod models
    To more easily find compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    Apple Club - filter apps by iOS version.

  • My ipod touch 4 jack goes in and out. what can i do?

    My ipod touch audio jack goes in and out no matter what earbuds i put in.   can this be fixed?

    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • When I went to sync my iPhone, I accidently hit restore and it made my iPhone have all of the settings of my iPod Touch, erasing my iPhone pictures and contacts. Is there any way to get everything back?

    When I went to sync my iPhone, I accidently hit restore and it made my iPhone have all of the settings of my iPod Touch, erasing my iPhone pictures and contacts. Is there any way to get everything back?

    Not to doubt you, but something sounds fishy. I can see accidentally clicking Restore, but to load your Touch's information you would have had to select your Touch's backup file after restoring, which would be hard to do by accident -- unless your iPhone and Touch have the same name?
    In any case, your iPhone should have its own backup file on your computer. You can click Restore again and this time select the iPhone's backup file (there should be a device name and date associated with the pop-up window at the end of the restore process). This process will erase your iPhone, reload the OS, and then when you select your backup file then all your iPhone settings, data, sync options, etc. will be re-loaded, including your media (if you auto-sync ... if you manually manage music and video on the iPhone then you'll need to re-select the items you want loaded onto it).

  • My ipod touch is in dfu mode and does not want to turn on.

    my ipod touch is in dfu mode and does not want to turn on.

    What happens when you connect the iPod to your computer and restore viia iTunes?

  • How do i recover ipod touch screen with usb cable and arrow to itunes

    ipod touch 3 has usb cable and w pointing to iTunes.  Can't get it to recovery or restore

    Connect the iPod to your computer and restore via iTunes
    iTunes: Restoring iOS software
    If necessary:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

Maybe you are looking for

  • Bought Snow Leopard in order to download iTunes 11 in order to connect with iOS 7 iPhone, doesn't support iTunes 11

    My problems started when I upgraded my iPhone's software to iOS 7. I have moved from Melbourne, VIC to Perth, WA and my PC is in Melbourne. I live with my Girlfriend, and so I mainly use her desktop Mac to connect to iTunes, so you could imagine my s

  • Fetch Data from BI system and populate a Table

    Hi, I have to fetch the data from BI system into a model and populate the Table. The data resides in BI system. I am creating model from adaptive RFC and the function module is RRW3_GET_QUERY_VIEW_DATA. This is the max information i have got to execu

  • Icon_history

    hi i need to add icon_history symbol in the alv grid could you please help in this <b><REMOVED BY MODERATOR></b> Message was edited by:         Alvaro Tejada Galindo

  • Log attribute into report

    Hello, > I work with a "multiple numeric limit" test. > For each item of my "measurement" array, I have created an attribute : a string which name is "Channel". > Please see screenshot : you will see that during execution, I change my attribute value

  • Jpeg-Header is being edited after files are moved

    My problem which I have already posted in another forum, is that after I moved jpeg-files from one folder to another on the same partition (my photo collection) these files have been edited and gain size approx. between 2 KB and 5 KB. The conclusion