Ipod touch 4g power button not working

My ipod touch 4g power and both of the volume button are not working, after a small trip to a repair shop becuase screen was cracked. Now i got to use assitive touch to lock, volume up and down, take a screenshot, and power off my ipod touch. My ipod touch 4g has no more warranty left.

See:
http://www.ifixit.com/Teardown/iPod-Touch-4th-Generation-Teardown/3562/1

Similar Messages

  • IPod Touch Sleep/Power Button Not Working! Help!

    I have the new iPod Touch 32 GB and I got it in September. Since yesterday it started lagging with the button: When I push the sleep button to put it to sleep it waits 5-10 seconds and asks me to move the slider to shut down. Its like the button is stuck inside or something. Does anybody else have this problem? What should I do?

    I have a 3g iPhone 32gb and this is happening with me as well. Actually, the darned thing freezes all the time (see my reply in the "Unresponsive" discussion: http://discussions.apple.com/message.jspa?messageID=10981942#10981942).

  • IPod Touch 2G Home button not working after OS4 upgrade

    Hi there,
    hope someone can help. Upgraded an iPod Touch 2G to OS4.1 and teh home button will not work now normally, but will work if its attached to a PC and iTunes. Anyone seen this before and how to fix it?
    Cheers,
    Martin

    HI there,
    thanks for the reply. Tried both of what you suggested, also tried the home button thing only working while plugged in with two computers and two different leads which is why I suspect is an operating system thing.
    I may try downgrading the operating system next, just have to find a copy of an old one somewhere.
    Cheers,
    Martin

  • IPod touch 4 home button not working properly

    I got my ipod in november 2010 and it worked fine up untill august where the home button just suddenly became undresponsive. I did not abuse my iPod i am very careful i have a case and no screen cracks/dents etc.. Now it works about 30% of the time and it is really annoying I had to turn on this awful feature where i geta virtual home button which is in the way of everything and i cant even arrange it properly. I am very dissapointed with apples express lane which provided absolutely no help and in their hardware. I have several freinds who got the same type of ipod at around the same time and they are having the same problems. Was it designed to do this? I am now wondering how much I am going to be charged for this. May I get it for free even though my warrenty expired very recently? thanks for the help

    Try here:
    FIX for iPod Touch Home Button: Apple Support Communities

  • Ipod Touch Sleep/Wake button not working

    Okay people I've had my 1st generation iPod touch since April of 2008...all of a sudden ( a few months ago) my sleep/wake button just stops working. Then recently it began to work again like for 4 days and then it just S T O P P E D ....A G A I N!!! pleassssse help me i really am frustrated
    Deuce

    Hi Deuce,
    Do you have a protective case or film on the iPod? If you do try removing it and testing again.
    You can restore the iPod to rule out software issues. This article: http://docs.info.apple.com/article.html?artnum=305744 will walk you through restoring the iPod.
    If the issue persists without the case and after restoring, the iPod may need hardware repair, you can get it repaired by making a reservation to have a Genius at a local Apple retail store take a look at it, calling AppleCare, or requesting repair online.
    http://www.apple.com/retail/geniusbar/
    U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
    https://selfsolve.apple.com/GetWarranty.do
    -Jason

  • The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    it might be a malfunction in your device. you might ave to send it to repairation
    1.ave you try resetting it or restoring it?
    2. did your hold boutons whas working beffor?

  • The 'sync apps' button on my ipod touch on itunes is not working

    the 'sync apps' button on my ipod touch on itunes is not working(it won't show the tick to show that it's going to be synced). i have reinstalled iTunes, restarted my iPod and restored it.
    what do i do??

    Try:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • He menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that t

    he menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that they don't cover that center part of the ipod so they're asking us money before they can fix it. We bought the ipod last december 8, 2010 and we brought it to the service center last april, 2011 here in the philippines. And until now they're not fixing it because they're asking us to pay half the price of the item which is 8,040 pesos..

    As advised, you need to call Apple about this.
    http://support.apple.com/kb/HE57
    No one here works for Apple (no one who will reply, anyway) so there's nothing anyone here can do to help you with this issue.
    Good luck.

  • The head phone jack on my brand new iPod touch 5th generation is not working properly

    The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar

  • Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Have you tried the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod.
    If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

  • Power button not working

    iPopd touch 4th generation sleep/power button not working.
    Any ideas? how long is warranty?

    The standard warranty is one-year. Yu can purchase, before the one-year is up and additional year. Yu can check your coverage here:
    Apple - Support - Check Your Service and Support Coverage
    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • My ipod touch headphone jack do not work when I plug in any headphones to it.  How do I get to listen on headphones again on my IPod touch?

    My ipod touch headphone jack do not work when I plug in any headphones to it.  How do I get to listen on headphones with my IPod touch?

    You likely have a problem with the headphone jack.  You jhave to ways to listen to music via headphones:
    - Get the jack fixed.  Here is one place:
    DigiExpress.us - The iPad Repair Professionals
    However first I wold rule out a software problem by try the following:
    Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup
    - Restore the iPod to factory defaults.
    The other way is to use bluetooth headhone if you have a 2G or later iPod.

  • My iPod Touch Front Camera Is Not Working Properly.

    My iPod Touch Front Camera Is Not Working Properly.When I Try To Take A Picture ,It's Very ,Very Blurry. When I Put My Finger Close To The Camera It Looks Perfect. You Can See My Skin Lines{I Dont Know What They're Actually Called} It's Like It I Had It On Zoom Or Something . My Back Camera Is Perfect,And When I Put My Finger Close Its Just Blurry. Can You Help? I've Tried Everything ,Cleaning It, And Reseting It.
    Please Help.
    Thank You.

    The poster said he has iOS 5.1 which is the latest update.
    apple81 wrote:
    Hi:  I had the same problem but it was fixed by performing software upgrade iOS 5.  Go to settings-general-slect-update software.. Fixed it right way and now is even better with more features..

  • I have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray.  i have tried resetting it and its not workin. what should i do, please help. thanks

    i have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray.  i have tried resetting it and its not workin. what should i do, please help. thanks

    If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • Power button not working with 7.1 update

    Power button not working with 7.1 update

    I take it your phone was still under warranty then?!
    Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
    I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
    I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
    When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
    Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
    I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
    I seriously think Android is calling me...

Maybe you are looking for

  • Corrupted Frame files not importing correctly to RoboHelp and can't save MIF as FM

    Hi, I have Adobe Technical Communication Suite 3.0, which has FrameMaker 10.0.2.249 in it. I created a user guide in FrameMaker, some of the chapters for which I imported from Word, and little bits of text here and there of which I copied and pasted

  • Everything is extra large and off the screen

    I was in a iPhone app at 2x, closed the app and everything was so large the iPad was unusable. I rebooted it and the screen came up the same. Nothing I tried would restore the screen. Brought it to an Apple store and they never seen that and it must

  • Date Format in text

    Hai all I want to get the date format in text like dd/mm/yyyy based on the locale value. Is it posible to get the string format insted of date. Thanks a lot Aniesh U.K

  • Frontierville wont load I get (security) (5) error everytime in a loop

    The load page will show up and then a window with the character (Sam) will say something like "we lost internet connection, lets do a little reload" and then (security) (5) when I click the accept button it tries to load up again and the same happens

  • Delete item to wastebasket get missing user error

    When I tried to delete a document from "my portfolio" in portal to my waste basket, I got error message "missing user". By checking the SAP log trace file, it showed "Cannot instantiate user <anonymous>". Our Portal (Netweaver 7.0) is SSO to LDAP, an