Ipod Touch 4G Remote App not working

I was able to link my ipod Touch 4 to my laptop PC's itunes library. But when I try to register it with my desktop PC, iTunes accepts the four digit code and says "Your remote is now able to control iTunes." as it did on the laptop. But on my iPod the library it set up has a blank name at it won't connect. I've verified that the firewall on my PC has the correct ports opened. I even tried it with the firewall turned off but no luck.
My desktop PC is running Windows 7 Pro and my laptop PC is running Windows 7 Home Premium. I don't know that might have anything to do with it.
My iPod is software is version 4.2.1. The Remote app is version 2.1. I've tried Forgetting all remotes on my desktop's iTunes library and re-configuring the library, still no luck.
Any idea why it will connect on one PC and not the other? Both PCs are on the same network so I doubt it has anything to do with my router.
Message was edited by: maxbert

I had a more detailed look what my Netgear router setup (WPN824) is. UPnP is turned on and it has the following rules set:
Active Protocol Int. Port Ext. Port IP Address
YES UDP 4500 4504 192.168.0.4
YES UDP 5353 5357 192.168.0.4
The IP address listed is my MacMini.
Anyone around who knows if additional port fowards are needed for Remote to work?

Similar Messages

  • IPod touch 5th gen apps not working

    In the last couple of days, the apps on my iPod have not been working well. Some of my apps, like Facebook, won't open at all. They immediately exit when I choose that app. Even my Safari won't open. In other apps, like Tumblr and Instagram, they open, but they won't refresh. When Safari was working, I noticed that all my bookmarks and favorites were gone. I don't know if it's related to the my other issues but I would like help on that also. I need my iPod fixed, as it's my primary form of communication. I've restarted it a couple times. Any help please?

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod

  • The 'sync apps' button on my ipod touch on itunes is not working

    the 'sync apps' button on my ipod touch on itunes is not working(it won't show the tick to show that it's going to be synced). i have reinstalled iTunes, restarted my iPod and restored it.
    what do i do??

    Try:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • I forgot my passcode and tried restoring my ipod touch, but it's not working. What should I do?

    I forgot my passcode and tried restoring my ipod touch, but it's not working. What should I do?

    Did you place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • The head phone jack on my brand new iPod touch 5th generation is not working properly

    The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar

  • The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

    it might be a malfunction in your device. you might ave to send it to repairation
    1.ave you try resetting it or restoring it?
    2. did your hold boutons whas working beffor?

  • He menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that t

    he menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that they don't cover that center part of the ipod so they're asking us money before they can fix it. We bought the ipod last december 8, 2010 and we brought it to the service center last april, 2011 here in the philippines. And until now they're not fixing it because they're asking us to pay half the price of the item which is 8,040 pesos..

    As advised, you need to call Apple about this.
    http://support.apple.com/kb/HE57
    No one here works for Apple (no one who will reply, anyway) so there's nothing anyone here can do to help you with this issue.
    Good luck.

  • My iPod Touch Front Camera Is Not Working Properly.

    My iPod Touch Front Camera Is Not Working Properly.When I Try To Take A Picture ,It's Very ,Very Blurry. When I Put My Finger Close To The Camera It Looks Perfect. You Can See My Skin Lines{I Dont Know What They're Actually Called} It's Like It I Had It On Zoom Or Something . My Back Camera Is Perfect,And When I Put My Finger Close Its Just Blurry. Can You Help? I've Tried Everything ,Cleaning It, And Reseting It.
    Please Help.
    Thank You.

    The poster said he has iOS 5.1 which is the latest update.
    apple81 wrote:
    Hi:  I had the same problem but it was fixed by performing software upgrade iOS 5.  Go to settings-general-slect-update software.. Fixed it right way and now is even better with more features..

  • I have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray.  i have tried resetting it and its not workin. what should i do, please help. thanks

    i have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray.  i have tried resetting it and its not workin. what should i do, please help. thanks

    If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • My ipod touch headphone jack do not work when I plug in any headphones to it.  How do I get to listen on headphones again on my IPod touch?

    My ipod touch headphone jack do not work when I plug in any headphones to it.  How do I get to listen on headphones with my IPod touch?

    You likely have a problem with the headphone jack.  You jhave to ways to listen to music via headphones:
    - Get the jack fixed.  Here is one place:
    DigiExpress.us - The iPad Repair Professionals
    However first I wold rule out a software problem by try the following:
    Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup
    - Restore the iPod to factory defaults.
    The other way is to use bluetooth headhone if you have a 2G or later iPod.

  • IPhone 4 Remote App Not working

    Hello,
    Sorry for posting another 'not working' thread, but having searched the forum I cannot find my answer.
    I am not very technical, but I have iTunes and an iPhone 4.
    I have the remote app and the app has worked perfectly up until recently.
    I have upgraded iTunes to 10 and also my antivirus.
    Now I know alot of these things could be caused by the firewall, but I have allowed iTunes to be let through the firewall and I have switched off the firewall in the past to ensure it was not this.
    When I switch on the computer and open iTunes then go to the remote app it works. It is when the iPhone 'sleeps' that the library wont re connect, OR if i have been using iTunes and then try and start the remote that it will not work.
    Any ideas at all as it is so frustrating. I am not technically minded, so switching router channels etc and proxy settings/DHCP etc dont really make sense to me.
    I have tried rebooting everything including the router, but believe it is something simple as it was working prior to iTunes 10.
    I am running a PC on Vista
    Thanks
    Steve

    no I use both ipad2 iphone4 with remote app and have no issues with ios
    try removing the setup and start over

  • IPod Touch - Apple Remote App Problem

    Hi there,
    I am having problems with getting the Apple Remote App to work with my computer.
    I have installed the app on my iPod. I go to pair it with my computer and it doesnt show up in iTunes. I have the latest itunes.
    My iPod will connect to my laptop (running vista)
    I have disabled the firewall, and that still hasn't helped.
    My computer is wired into the router using an ethernet cable.
    My iPod is connected to the router using the wireless.
    My computer is on a domain. Could that be some of the problem?
    Thanks for the help in advance

    Hi Ellipsiss,
    Try the general tips in this article: http://support.apple.com/kb/TS1741
    -Jason

  • My Ipod touch 4th generation is not working, its frozen, ive tried everything and its not working, its just frozen on an app and i really really need HELP!!!

    My Ipod is frozen!!! Its a 4th generation and its frozen on an app, Ive tried everything like holding down the lock screen and stuff and its not showing the red thing to slid to shut it down....This is my only thing to use to contact my friends and its not working, i dont have a phone and i cant get one, so this is the onlything i have.....PLEASE HELP!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Both cameras on my iPod touch generation 4 will not work anymore. Is there a way I can send it back to get it fixed? Thank you ..

    Both cameras (front/back) will not work anymore. I would tap on the camera app, and the camera shutters would stay closed for a while and when it finally opens, it leaves a full blank screen. Is there a way I could send it in and get that repaired?

    GEESAR wrote:
    hi there
    is there anyway i can use the unlimited data i have from my mobile network provider (o2)  on this i pod touch 4 generation the latest model  NO.
    and does the sim from my mobile network o2 be used in the ipod touch4 to use the unlimited minuites i have from my mobile network provider  NO
    if not then how do i use the unlimited data ive been given through my mobile network provider please tell me most kindly  Purchase a mobile WiFi hotspot (Sometimes referred to as a MyFi), or have that service added to your cell phone.
       geeeeesar also how does this ipod touch4  pick up the  wifi free of charge is this possible or do you have to pay for limited data to access internet Your iPod can connect to any unsecured WiFi network that you are currently within range of.  These networks can be found at your local library, some city/county government buildings, doctor's offices, Denny's, IHOP, Starbuck's, Home Depot, Lowes, Best Buy, and other merchants.  Your iPod can connect to any secured WiFi network that you are within range of and that you have the password for. 
    thanks  can i pod touch 4 generation download movies too  please help thank u very much....  Yes.  If your iPod has a WiFi connection and you have an account with a service like NetFlix....

  • The button on my iPod touch is hard and not working properly

    I have bought an iPod touch 4G est year (2012) and the start button is hard and sometimes when I give once calcase responds as if twice. I have an iPad and the button is softer and I have friends who have an iPhone and is also soft.
    Regards.

    Try:
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Maybe you are looking for

  • How do I submit a computer for repairs/use my warranty?

    Okay, I have a HP Pavillion 500-a60 Desktop PC and this thing has given me trouble since I've first gotten it! The frist problem was that it's hardware system crashed within the frist 3 weeks of having it THEN when I got a new one it wouldn't conntec

  • Use DSAdd Group for adding several groups at the same time

    Good Afternoon!, As is written in my book: "By leaving the DN parameter empty, at which point you can type the DNs one at a time at the keyboard console of the command prompt. Press Enter after each DN. After the last DN, press Ctrl+Z, and then press

  • Dynamic stamps with Acrobat Pro X

    Help needed! How to create own dynamic stamps with Acrobat Pro X, without any knowledge of programming. It was very easy with the program used before (Nuance); unfortunally it's not possible to export from Nuance to Acrobat. Thanks in advance vtosi

  • Error Dynpro_not_found

    using this code to call me22 but getting error dynpro_not_found FORM transaction_bdc .   DATA :   wf_number type i,   wf_trans type i,   v_cnt(2) TYPE n,   v_bst(2) TYPE n,   v_bn TYPE i,   v_bstpo(25),   v_ebtyp(25),   v_menge(25),   v_eeind(25),  

  • How can I set the timebase in the FPGA API for the NI 9853 CAN module?

    Hallo, is there anybody familiar with cRIO, especially the NI CAN 9853 Modul? When starting communication with a CAN Bus  you can get a receiving CAN Frames from the FPGA I/O Node with a timestamp. How can  I set  this  timebase in the CAN Controller