IPod Touch 4g won't charge and play at the same time

I used to have a 4g Nano that I would play in my car through an aux cable and charge through a cigarette lighter charger. I just got a 4th gen iPod Touch and it no longer lets me charge and play at the same time. If both wires are connected it will only charge and not play, once I pull the charger part out it will play through the speakers. Is there a fix to this? Do I need a different charger so that it won't think it's simply docked?

You would need to turn off hard drive mode via iTunes iPod settings on your home system to do this. I don't know if you have this mode on or off already. I thought I read that there is a way to enable/disable hard drive mode via the iPod buttons but I don't remember how.
Thanks,
Steven

Similar Messages

  • I want to play my ipod classic through my hi fi and recharge at the same time, would the apple 5w usb mains adapter allow this?

    Can I use the apple 5w usb mains adapter to charge my ipod classic at the same time as playing the ipod through my hi fi, I have connecting cables dor the hi fi.  Cheers.

    Have you dropped it by any chance? I reccommend you take it back to the shop and swap it for a new one.
    i hope this info helps

  • Charge and Listen at the same time?

    I am new to the IPOD experience, and I am listening to my IPOD Nano at work, without ITUNES. I want to listen to the IPOD and charge it at the same time. But it seems while the IPOD is charging, the "do not disconnect" icon is blinking, and I can't play any songs. The only thing I can do is "eject" the IPOD, and then I can listen. But even though it's plugged in, I don't think it's charging. I tried to download my music to some other media player on my office computer, but no luck. I am not allowed to download software, so I can't put ITUNES on my desktop. Any advice?

    even though you "eject" your ipod, it is still charging. and listening to it while it is chargin is okay.

  • Charging and listening at the same time?

    Is there a way to play and charge the Shuffle at the same time??

    Well considering that the charging/data USB cable and the headphones use the same jack, it doesn't seem possible. Maybe a y-cable would allow it, but some of the contacts in the headphone jack may serve two different purposes depending if the iPod is charging or playing, so may not be able to do both at the same time.
    On the other hand, you may be able to play the iPod through your computer while charging it. Set up the iPod for manual mode then if you plug it into a computer with iTunes installed, you can play music out of the iPod on your computer.
    Patrick

  • Charge and connect at the same time

    I'm still waiting to get an N8 so can anyone tell me if it's possible to connect up a charger at the same time as using USB to connect a keyboard/mouse and external storage device via a powered usb hub?
    In other words, can I use USB devices while it is being externally powered?
    What about when it's using a dock that I've briefly seen on some youtube videos?

    Sorry, but we're not allowed to speculate about future releases on these forums.
    Cheers!
    -Bryan

  • Two clips overlayed and playing at the same time..

    Hello!
    Is there anyway to play two clips at the same time?
    The same way cross-disolve layers the images??
    a thousand thanks!!

    Hi (again)
    I figured it out.. So if anyone is interested, all you have to do is go to Modify and then change the composite mode to Overlay. Then it has to be rendered. Piece of cake!!
    Thanks!

  • Save a movie and play at the same time

    HI. Am having a problem to save a movie(both video and audio) to a temporary file and playing from that temporary file at the same time.
    Infact the movie in coming from a server. Am using AVReceive2 to receive the movie. The temporary file will be growing while am playing it.
    Can anyone help me? PLZ.

    Hi all,
    I have a problem,
    I have managed to create a player and a processor that plays and records live video and audio(i have merged the datasources at the sender).
    when i create a clone for sinking the video, i donot get track[1] (audio) control of the processor.
    i think the problem is with cloning. when i gave the player the clonable interface instead of the original DS, it also did not give any audio.
    thanks ahead for your help

  • Cannot download content and play at the same time

    Hello Again,I am not sure if this is thanks to the last update but during this week I have not been able to download a game and play others game at the same time.I leaved the game downloading then went to play something (online or campaign) and a couple of minutes later the game that I was downloading appear with an error cannot download, error connection etc.I checked my network and is fine, even purchased a new router with the same results.Is somebody else experiencing this problems or know a solution for this?

    Hello Apparently the problem was the game I was downloading i downloaded 2 games today an no error

  • Can't charge and sync at the same time?

    I just bought my iPad 2, and noticed that I can't charge it and sync it at the same time like I can with the iPhone 4. I can if I have it plugged directly into my MacBook, but I use 2 different USB Hubs, and I have the iPad plugged into a hub. Is there a fix for this?
    The iPad is running iOS 4.3.
    The MacBook is running Mac OS 10.6.6

    I have a Griffin PowerDock, and having upgraded the software on my iPhone 3GS to IOS 5.1, I am able to charge and wirelessly synchronise simultaneously.
    I am hoping it will be the same for the iPad that I am planning on buying soon, although this will have to be a wall charge because of the extra power needed by the iPad.
    The fact that IOS 5.0 allows wireless synchronisation will probably stop any further development in this area by Belkin and Griffin.

  • HT1222 The music in my iTunes library run together and play at the same time.

    The music in my iTunes library run together andplay at the same time.

    The "bar" at the bottom does not say anything about all of your songs being on the iPod.  It just shows you how much of its storage capacity is being used, based on what is on the iPod.
    If you see "On This iPod," that means the iTunes sidebar (along left side of window) is not visible.  This is easier to describe with the sidebar visible, so from the iTunes menu bar, under View, select Show Sidebar. 
    Select the iPod in the sidebar, under DEVICES.  There is a bar of buttons near the top, starting with Summary.  Click on Music next to Summary.  This is the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
    Check the box for Sync Music.  You can choose to sync Entire music library, if (?) your iTunes music library fits on the iPod.  With this setting, your entire iTunes music library syncs to the iPod, and new songs get synced automatically.  A 7th gen iPod nano is 16GB, so your iTunes music library would have to be less than 16GB (not counting non-music content on the iPod).  Otherwise, you can choose to sync Selected playlists, artists, albums, and genres.  Then, select (checkmark) the playlists, artists, albums, and/or genres you want on the iPod from the lists below.  If you want newly added songs to sync to the iPod, they must be part of your selection.  For example, you can add them to a playlist that you have selected for syncing to the iPod.
    When you click Apply, the songs from your selection sync to the iPod.  Going forward, changes to your iTunes library (based on your settings on the iPod's Music screen) sync automatically to the iPod, the next time it is connected (or when you click Sync).

  • Does MagSafe 2 T Connector get hot when charging and using at the same time (while the light still in amber) ?

    Hi,
    Just want to check out with the other Apple Users here. I am using a Late 2013 rMBP, however the T Connector do get hot while I am charging and using the mac at the same time. Is this normal ? or do I have to drop by an Apple Store to check it out ?
    Thanks in advance

    Hello there.
    It's quite normal for the magsafe 2 connector (magnetic one) to become a bit warm while it's charging your mac. It will be warmer when your battery is low and the heat will start to dissipate as the battery charges. There is absolutely nothing to worry about. Normally your magsafe can go upto 35℃ depending your surrounding temperature. Even mine does. Just remember the warmth should not be untouchable, if that is what you feel take to a apple genius bar to get it checked.
    Hope that helps.
    Thank you.

  • How can I charge and listen at the same time?

    I'm using a windows PC and the USB connector. If I plug the cable in, iTunes automatically opens and I get the "do not disconnect" message and can't play music.
    If I eject my iPod from iTunes, it doesn't charge anymore.

    You can listen to the music on your iPod through iTunes. Just click on the nano icon where the library and store and playlists are and hit play at the top. If you want to listen to it while charging, you can do that by using a wall adapter to charge. I do this at work when my battery starts to get low.

  • Nano 6 gen will not play at the same time it is charging

    My Nano 6 gen will not charge and play at the same time via USB on a windows computer.  It has in the past, but now it will only charge and be recognized to the computer as an external drive.  If I "eject" it, it stops charging.  Not sure what to do.

    Is it set to Manually manage music, or Enable disk use, on the iPod's Summary tab in iTunes? If so, it will not operate as an iPod (when connected to your computer's USB port) while it is recognized by iTunes (and Windows).  It is acting as a storage "disk."
    However, if you eject the iPod (using the button next to the iPod in iTunes) and leave it connected to the USB port, if should only receive power from the port.  It should then operate as an iPod.  It should also continue to charge, if it is not fully charged already.
    In the past, you probably had it set to automatically sync, instead of Manually manage music, with disk use NOT enabled.  Then, the iPod would operate as an iPod when connected, except during the time when iTunes syncs the iPod.

  • My IPod Touch 4g won't charge or sync, how do I fix it?

    I had my IPod Touch 4 generation for 2 years now and suddenly my ipod won't connect to my laptop nor to any other computer source in my household. Before my IPod would only sync and not charge, so I would had to figit with the sync cable connected to my IPod just so I can make it charge and sync at the same time. Now it won't do either and my laptop doesn't even recognize there's a device connected (It doesn't even say "Device has malfunctioned, Computer can't recognize device). I open Device Manager and no IPod connected at all. I tried different sync cables and it's not making any differences. My IPod is drain out of its battery right now and when I connected, the IPod screen stays blank and when I click the power button, All it tells me is that my battery is low and i need to connected to a power source to charge it even though I have it connected to my laptop
    Now I have this feeling that there is something wrong with my IPod, but I don't know what it is. is it: Old Age, The Battery's dead and needs to be replaced, The place, on the IPod, where you connect the syncing cable to the ipod is broken? I have no idea and I have things in my IPod that I need to get urgently. So is there anyway to fix this or do I have to go to an apple store and see what they can do
    Thank you for all your help, I gladly appreciate it

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • Charge ipod and listen at the same time?

    hi,
    i sit at my desk for about 8 hours at work and would like to charge my ipod at my computer via usb and listen at the same time. is this possible? it's a pc computer here at work. and it does not have itunes installed and i don't see having itunes on it as a possibility.
    i don't like having to charge it, wait about an hour, then listen for a few hours, then charge it again.
    also, do you notice any battery "leakage"? i mean, i have some battery power at night when i turn it off, (yes, i do turn it off b/c the screen goes blank) and then when i get into work and try to turn it on, i get this battery looking thing and have to charge it.
    it's possible that the ipod came on while i was walking (it's in my bag), but this happens too often for me to think that it does.

    You'll need iTunes if you want to access your iPod and listen through your PC. Also you'll need to set it to manual update, see the articles below.
    Using iPod with Multiple computers
    Managing Your Songs Manually
    When your iPod is in your pocket make sure you have the lock on to disable the controls otherwise it is liable to get switched on and use battery power.

Maybe you are looking for

  • Error message on Creating a Connection for the OC4J

    Hi! I have followed all steps at http://otn.oracle.com/tech/webservices/htdocs/quickstart/quickstart903.html ... But at the last step, I've got a message when testing the connection: Invalid username/password for default (admin) Why? Thanks a lot.

  • Keyboard shortcuts on my ipad2 not uploading

    keyboard shortcuts on my ipad2 is receiving edited shortcuts but not sending edited shortcuts, my MacBook Pro and my iPad mini and iphone 5 are all working correctly, please can someone help

  • Is my IMAC 5.1 obsolete?

    I just received an IPAD for my bday...have all my Itunes on the MAC I bought like 3 years ago. To my surprise and dismay I found the IPAD wouldn't synch with my IMAC. Now I find my recent purchase of a Rebel also won't work with the movies. I had to

  • BAdI for negative numbers

    Hello All,   I am downloading data from an Infocube into a flatfile. It downloads the negative amounts as 100.00- as the InfoSpoke downloads it in the internal format. I read note 856619 which is exactly for my case. But I can't get the code to work.

  • Loosing Airport Connections - Core Duo

    My AirPort connection doesn't work on MacBook Pro handed to me. No bars in the AirPort menu, no network shows. MacBook Pro 15", Intel Core Duo, 2.16 GHz, 2GB RAM Running Leopard 10.5.4 with all other Apple updates AirPort Extreme (0x168C, 0x86 - Athe