Ipod touch 5 won't work after installing IOS 8.2

I had gotten my Ipod in February from my boyfriend (he bought it brand new from Amazon). Recently, I had tried to install IOS 8.0.2 (the newest one) and I had accidentally shut it down, thinking it would stop the update. Boyfriend told me nothing about not updating it and just waiting. But now it refuses to turn on. there are times when it has the apple logo and it stays for a good 15 seconds but sometimes it will fade away completely. We have tried everything. The Itunes will do the restore thing but then at the end, it will say it can't finish. Help!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

Ipod touch won't work after installing a new app.

Hi!
Last night, I decided to install a new "Alarm clock," app and test it out by setting it to ring a minute later- what a BIG mistake, because during the time it was supposed to ring, it made my Ipod touch completely crash instead. For the past few hours all it's been doing is flashing back and forth between my homelock screen (with the "slide to unlock," bar at the bottom) and the Apple logo, with the round 'processing' image infront of it.
I have tried many different things to get it out of this funk but nothing has worked! I tried resetting the Ipod by holding down the menu and power button, the screen went black temporarily, didn't show the "slide to power off" bar and then just reloaded with the same two flashing images. I tried restoring it, but it wouldn't restore, until I did a special reboot that I read about via online boards- where you have to hold the power + menu buttons for 10 seconds, then release the power button whilst holding just the menu button for 10 seconds- but, whilst the Ipod did go through the whole restoring process thereafter, it didn't manage to sync up.
Now, not only does my ipod STILL flash back and forth between those two images. I keep getting an error message of (0xE80000001)! I used a different cable to try and sync up, but the blasted thing still won't stop flashing back and forth between those two images, and the ipod is not being recognised by itunes so the ipod keeps beeping, in and out of itunes and won't sync!
My ipod isn't 'jailbroken,' I haven't touched it's software or altered it in any way, to how it was sold to me. I would've liked to have brought it back the the Apple store to be looked at, but I don't think they'll help me because the top left hand corner of my Ipod is completely missing after my niece dropped it a few months ago- the Ipod still worked (up until I installed the **** alarm app) perfectly well until now!
Also, I have a mac, so any tips on how to access/help/fix this problem would have to have instructions for a Mac OS not Windows please!
Many thanks!

I keep getting an error message of (0xE80000001)!
Read here. iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

My Ipod touch email stopped working after installing Update

my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

Hi, jewlssch.
Thank you for visiting Apple Support Communities.
If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail. If the issue persists, process a reinstall of Mavericks.
Reinstall OS X
http://support.apple.com/kb/PH10763
Make sure to backup all of your data prior to reinstalling OS X 10.9.
Back up your Mac
http://support.apple.com/kb/PH11371
Cheers,
Jason

My ipod touch won't work after software update.

Last month I downloaded a software update for my iPod Touch and afterwards it wouldn't work or connect to my PC. It just showed a picture of the USB cable with an arrow pointing to the iTunes logo.
I fixed the problem by plugging the iPod into my other PC - where it connected no problem - and I Restored it. I then plugged it back into the first PC and re-synchronized it there. It worked fine after that.
I just downloaded a software update for iTunes and the iPod Touch, and I have the same problem. I know that I can go through the same time-consuming solution as last time but how do I fix this so that it doesn't keep happening?
My PC does seem to recognise the iPod as a camera when it connects. Could that be it? Help please.

Have you tried everything here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
It is normal/expected for the computer to recognize the iPod as a camera. It would only be a possible problem if you installed a program such as for a camera or scanner.

New ipod touch won't work with itunes 10.6.3 says it needs 11.1 but I cannot load that on my macbook using OSX 10.5.8 any way around this?

New ipod touch won't work with itunes 10.6.3, says it needs 11.1 or newer but I cannot load that onto my MacBook running on OSX 10.5.8 - is there anyway around this?

No. If your MacBook has an Intel processor you can update to OSX 10.6.8 and then install the latest iTunes.
A 5G iPod with iOS 7 requires that if you have a Mac you have OSX 10.6.8 or later.
You can get 10.6.8 here:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Iphone 4 won't open after installing ios 7.1

Please help. My iphone 4 won't open after installing ios 7.1.. I already connected it to my pc but still didn't open. I waited for a long time, press the on/off, home buttons but still didn't work. Thanks Jah bless all..

Honsetly I do not know if they will charge you, however apple products usually have a one year warranty, such as your charging cable, might. But if you tried to use another charging cable then you will want to make an appointment with Apple. good luck

My apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

Apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

You may of had a corrupted install. Connect to iTunes backup then restore. Or update the apps on itunes then sync to the iPhone

External keypad won't work after installing OS 7.

External keypad won't work after installing OS 7. I have a "Zagg" keyboard that won't pair now to OS 7,...Why?

They do work. I have one and mine is working. Have you tried to reset your iPad? HOlding down teh sleep and home keys until it reboots then try pairing again.
A slightly more drastic thing is to go into the settings and reset all settings. THe downside, you will need to retweak your device but it can help fix keyboard glitches.

2ng gen ipod touch, Apps NEVER work after sync, please help a noob

2ng gen ipod touch, Apps NEVER work after sync.
am i missing something? i basically have to lose all my apps in order to add tunes.
its doing my head in, Help pweeeessee..

Hi
Try to reset your iPod and then deauthorize and reauthorize your computer, then sync the iPod again.
To reset the iPod touch just hold the Home and Sleep/Wake buttons until you see an Apple logo appear.
You can deauthorize the computer from the iTunes Store menu.
This article: http://support.apple.com/kb/TS1702 provides more general troubleshooting tips for applications purchased from the App store.
-Jason

Printer won't work after installing mountain lion?

printer won't work after installing mountain lion?

Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

Power button on ipod touch won't work?

The Power button on my ipod touch won't work at all, any suggestions?

Okay it says here https://selfsolve.apple.com/agreementWarrantyDynamic.do that your warranty has expired, my recomendation is to either clean it out with a needle, or just keep pushing it hoping it will un-stick.
hope this helped

IPod Touch suddenly won't sync after installing iOS 4.0

I installed the new OS 4.0 and now my ipod touch won't sync. The mac doesn't see it and it doesn't even charge when hooked up. It charges fine with the same cable on a wall charger. My son's ipod is fine, I've restarted the ipod and the mac, I've reset the ipod, i've swapped usb's and cables, no luck. I've tried holding down the lock and power buttons. It's a 32 gig model. My iTunes is version 9.2 (the current version). When I had SW version 3.1.3. I had the same problem with an updated app, but when I updated the app again the problem vanished. I have no way of knowing which app it is or whether its the OS because they all updated at once.

A couple of things come to mind. If Apple Mobile Device Services is not working properly, your Mac isn't going to see the iPod. You can troubleshoot that problem with some help from this Apple Support article: http://support.apple.com/kb/TS1747
The other thing that could be happening is a hard drive permissions problem. Chances are you haven't done this in a long time. Go to Applications > Utilities > Disc Utilities and select your hard drive where iTunes is installed. Check off the Repair Permissions box and hit go.
Message was edited by: luvlabs

Installed latest update, and now ipod touch won't work

Hello, I clicked on the download and install option for the latest update to my ipod touch. I think it was 2.2.1, but I'm not 100% sure. Anyway, now I have to hold the power button down several seconds, and I see the apple logo, and then the itunes icon with the USB plug which indicates I need to connect to itunes. When I plug it in to the pc, I get prompted that I have installed new hardware and need to install the device drivers. It is not recognized by itunes or my pc. Please help!!

Hello, all, my ipod touch is now working. Here's what happened...I called the tech support line and started going through the automated stuff. It started me with the reset which I had done numerous time. It then mentioned trying a different USB port. I figured it was a waste of time, but then I decided what the heck, so I tried the other usb port on the front of my pc. When I did this, it recognized the ipod in ituned and gave me a mssg that it needed to be restored. I clicked on the restore link, and minutes later it gave me an error message on the restore, and the ipod showed the apple on the sreen instead of the itunes logo with the usb cord. I then tried it back in the original usb port, and received the same windows prompt to try to install drivers that I had been getting all along. I put it back in the second USB port, and got the restore message again with it being recognized in itunes. This time it successfully completed the restore. I know it sounds simple, but if you have not tried a different USB port, be sure you do. Maybe the download jacked up my USB port? Anyway, I'm working again with the 2.2.1 download. Good luck to all!!

IPod touch won't charge while installed in vehicle through direct interface

Hello,
This just began happening about two weeks ago. The touch won't charge while installed in the car directly through the interface. I have tried three different set-ups so I know it is not the iPod cable or stereo. It seems to charge and hold said charge fine through wall plug or CP but while in the car it only seems to charge enough to continue playing and then when the car is off, it acts as though it is no longer connected and dies so when I start the car the next time, I have to wait for the unit to charge enough to play...
Oh and it is a 1st gen 8gb touch.
Is this the battery or a hardware issue with the touch itself?
Thanks for any help...
Nick

I have the same problem with my Audi and started when I installed the 3.0 update. Besides I can't use the Hi Fi Apple device, which I bought 3 years ago. I'm sure the update didn't take in considerations old interfaces and the HiFi.
32gb
2nd gen

Volume buttons don't work after installing ios 7.0.4

I have an Iphone 4 (MC603B/A) and after installing IOS 7.0.4 the volume buttons and the mute switch don't work. Also, if I receive a call or a message I don't get any sound.
There is no sound either if I play a video. At the same time, the alarm does work and the voice in the GPS works also.
Any ideas on how to resolve this issue?
Thanks

I have exact the same problem as you! Soon I will go to an Apple Genius Bar. When I got the solution, I will tell you!

Ipod touch 5 won't work after installing IOS 8.2

Similar Messages

Maybe you are looking for