IPod Touch 5G glitch when restoring

So my iPod Touch home button was a bit sticky and unresponisize. So i resotred. After the restore the phone was booting up, and it hasn't for 3 days. It will die, and then ill plug it in and it starts over again, the warranty is gone i got it refurbished. And the home just doesn't work whatsoever anymore. Any help appreciated.
I will do anything if it means fixing it. Please help me A.S.A.P
(iPod Touch 5g 32GB, Slate model.) Home button works fine

Ignor DFU mode and
Place the iPod in recovery mode using one of these programs and then restore:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and                                           
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC       
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too

Similar Messages

  • I have a ipod touch 5 and when i was loading it up to my computer i chose to restore my last ipod, which had no camera. After all my music was loaded all of my photos i had taken with my ipod had been deleted. Is there any way i could get photos back?

    I have a ipod touch 5 and when i was loading to my computer i chose to restore my data from my last ipod which did not have a camera. Then after all my music was uploaded i noticed that all the pictures i had taken on my new ipod had been deleted. I think it may be because i chose to restore my last ipod which no photos on it. I was wondering if there is any way to restore my lost photos?

    If you backed up the iPod before restoring it then restore from that backup. See the restore topic of:
    iOS: How to back up
    Also, if yoo have that backup you can extract the photos by:
    Recover iPhone, iPad or iPod photos from backups with Picturescue
    If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer

  • I bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?

    i bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?

    Hey jtom234412,
    Thanks for the question. Based on the information you have provided, it sounds like your device is not detected in iTunes for Windows. The following resource may help resolve this issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Furthermore, if your device is in recovery mode (displaying an iTunes symbol, with a plug), see the relevant information under Step 5.
    Thanks,
    Matt M.

  • I've forgotten my pass-code to my Ipod touch 4g and when I try to restore and update it on my itunes library the internet connection cuts out. Is there another way to fix this problem? Cheers

    I've forgotten my pass-code to my Ipod touch 4g and when I try to restore and update it on my itunes library the internet connection cuts out so this is not an option. Is there another way to fix this problem? Cheers

    The only way is to connect the iPod to a computer with has an internet connection and iTunes and restore the iPod. Use as friiend's computer or make an appointment at ther Geniuds Bar of an Apple store.

  • Ipod Touch error 1611 during restoring. PLEASE HELP!!

    I've bought my new ipod touch then I Updated to the new version. After that, there was an error showing on iTunes that my ipod touch had to be restored. Then in the middle of the reparing, it apears a message saing it couldnt restore due to error 1611. Please help me! I Have no idea what to do. I have allready reinstaled itunes and all apple aplicantions and it still happens this.
    When I connect Itouch to itunes, it says that its on restore mode and happens this error. And all the discriptions of the itouch on iTunes says "N/A".
    Please help me!
    Thanks,
    Filipe Baruzzi

    Wow, and to think I was alone in this! I think this must be a glitch in the Itouch or something, because NO ONE seems to have an answer. I am having the exact same problem as all of you. SOMEONE - PLEASE HELP US!!!!!!

  • When I download iOS 3.1 Software Update for iPod touch (1st generation) when i press download it doesnt do anything on my ipod ! help???? please

    I need help. When I download the ios 3.1 software update to my first generation ipod touch, I click download and i says it will be done in 30 minutes dont disconnect ect... Usually when i download something my ipod flashes download and it shows the time left on the top of itunes. Nothing happens today and it just stays on the instructions page. When I hit done it takes me to the appstore on my mac! HELP!!!!!

    Hello mixanme,
    Sorry to hear you are not able to update your iPod touch using iTunes.  Thank you for providing all that information about what is going on. I found an tutorial to assist with issues updating an iPod touch:
    Issues updating or restoring iPod touch
    http://www.apple.com/support/ipodtouch/assistant/restore/
    I hope these steps help!
    Best,
    Sheila M.

  • What can i do to sort my ipod touch 4th gen, when ever i connect it to my laptop my itunes keeps saying, and i quote "itunes could not connect to this ipod, an unknown error has occured" please helpppppp i have not had my ipod for long either

    what can i do to sort my ipod touch 4th gen, when ever i connect it to my laptop my itunes keeps saying, and i quote "itunes could not connect to this ipod, an unknown error has occured" please helpppppp i have not had my ipod for long either

    - Try restoring on another computer.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • IPod touch stopped working when charging now won't turn on at all

    iPod touch stopped working when charging now won't turn on at all

    Try in order:
    - After charging or half an hour, reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Connect the iPod to the computer and if it shows in iTunes, restore the iPod via iTunes.
    - See if placing the iPod in recovory mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem.

  • I cannot sync music with my ipod touch 4th gen.when i click sync nothing happens and the audio capacity bar on itunes disappears.i am using windows 8 consumer preview

    i cannot sync music with my ipod touch 4th gen.when i click on sync,nothing happens and the audio capacity bar on itunes disappears.i'm using microsoft windows 8 consumer preview

    You can only sync with one computer. I would backup to one computer and then restore from backup.
    iOS: Back up and restore your iOS device with iCloud or iTunes       

  • My iPod touch goes black when I try to face time. Can anyone help with a fix.x

    My iPod touch goes black when I try to use FaceTime. Can anyone help.x

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>FaceTime and sign out and then sign back in
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • I am currently using an ipod touch 3. When i record in voice memos with the apple earphones(with an inbuilt mic) i can see on the screen that its recording; but when i hear it, its just a long beep. Need some help!

    I am currently using an ipod touch 3. When i record in voice memos with the apple earphones(with an inbuilt mic) i can see on the screen that its recording;
    but when i hear it, its just a long beep. Need some help!

    Does the mic work for other apps like Voice Control?
    Does the mic work OK in other devices?
    Have you tried it with another mic?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT1476 My ipod touch only charges when im not using it, when i use it, it doesnt bring up the charging symbol

    My ipod touch only charges when its not in use and doesn't come up with the charging symbol. Please help cheers

    First try another charging source. Maybe the source yo are using is not putting out enough pwere when the screen is on.
    Next try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Is there a way to make the ipod touch not lag when playing modern combat 3 on ios 6

    is there a way to make the ipod touch not lag when playing modern combat 3 on ios 6 because when i play it laggs badddddddddddddddddd any suggestions or help

    Hey Harold the Lion Tamer,
    Thanks for the question. I understand that you are experiencing issues with your iPod nano (7th generation). The following resource outlines basic troubleshooting steps, and tips on the next best steps if your issue is not resolved:
    iPod nano (7th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS4433
    The Five Rs: Reset, Retry, Restart, Reinstall, Restore
    Remember these five basic suggestions if you have an issue with iPod nano. Try these steps one at a time until the issue is resolved. If one of the following doesn't help, read on for solutions to specific issues.
    - Reset iPod nano. First, make sure iPod nano is charged. Then press the Sleep/Wake button and the Home button for six seconds, until the Apple logo appears.
    - Retry with a different USB port if you cannot see iPod nano in iTunes.
    - Restart your computer and make sure that you have the latest software updates installed.
    - Download and reinstall iTunes.
    - Restore iPod nano.
    Issue not resolved
    If the issue is still not resolved, please read this information on servicing your iPod.
    Thanks,
    Matt M.

  • TS3694 how can I update my Ipod touche 2nd generation when I get error(-1)

    how can I update my Ipod touche 2nd generation when I get error(-1)
    I can't update my Ipod touch 2nd generation I always get the message error -1

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.

  • Some sections on my ipod touch arent responding when i touch them

    This just happened a few week ago and basically some sections on my ipod touch arent working when i touch them this includes letters on my keypad. If anyone has any ideas about whats going on with my ipod touch please respond.
    Extra information:
    =============
    3rd Generation
    8 gb
    Ipod Touch

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

Maybe you are looking for

  • WM-production order-need change the open quantity in Transfer order

    Hi,    I created the production order (order quantity 1000).  i did material staging and generated TR. .    But i need to change the open quantity in transfer order . i need to create the partial Transfer order     against TR..    KINDLY SUGGEST ME  

  • ISE 1.1.1 temporarily unvailable during VMWare snapshot

                       Hi all, we have a distributed deployment and when we snapshot out ISE VM's, they become unavailable for 1 - 2 minutes... Is this normal? Is anyone else seeing this? they have VMWARE tools installed although VSphere Client is showin

  • Will speakers play if connected to hdmi screen without speakers?

    I have just ordered a Macbook Air. I have an external monitor that has speakers seperate. If I use a minidisplay port to hdmi adaptor to connect to the monitor, will the sound be able to be played out of the speakers of the Air? If not, can I connect

  • Crystal reports 2008: Data appears upon refresh, but not on initial open

    I have an updated crystalreports.com / salesforce.com report to which I added a new subreport and an additional grouping.  The report is working fine, with one (rather major) issue: when the report is first opened, only some of the data is shown - th

  • Developer Mode Exception

    I am not able to understand what the below exception means,I would like to fix this in the Development environment.Can somebody help me in deciphering the exception. Developer Mode Exception encountered in item CacNtsCreateNotes Error: The item CacNt