Ipod touch 5g main camera will not open

Brand new Ipod touch 5g. Camera will not not open, facetime camera works fine. I have tried reset.

UPDATE
I restored the iPod via my Mac, downloading a new software file from iTunes.  After that, it works fine.  Updating to iOS 8.02, the new iTunes, and Yosemite worked to fix this issue.

Similar Messages

  • HT201412 ON MY iPOD TOUCH 4g, THE SHUTTER WILL NOT OPEN, SO I CAN NOT USE MY CAMERA. HOW DO I RESET IT. i HAVE TRIED TURNING OFF/ON, RESETTING IT AND RESTORING IT, NOTHING HAS WORKED. HELP!!

    On my Ipod Touch 4G, the camers shuter is stuck closed. I have reset it, restored it, turned it off/on, nothing has worked. Operating system is up to date. This has been an issue for a while, but it normally fixes itself.

    Try here:
    iPod touch: Hardware troubleshooting
    Also try placing the iPod in recovery mode and then try to restore via iTunes.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • Hiya, my ipod touch 4th generation cameras are not working.

    Hiya, my ipod touch 4th generation cameras are not working. I had the screen replaced about a month ago and it was working fine.  I woke up the other day and went on my camera and it had stopped working, it won't let me change from the front to back camera so i don't know what the problem  is: now all it shows when i go on the camera app is the shutter or a black screen. I have tried the advice people have said but it hasn't seemed to work. Any help would be appreciated!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar
    However, it other than Apple or an Apple Authorized Service Provider did the previous screen replacement , Apple will not help.
    For the future, saying that you tried the advice people have said, provides us with zero information as to what yu tried.

  • I restored my ipod touch however the apps will not sync.  I tried to re-download but I changed my apple id as my old id is no longer a valid email address.  Any ideas out there please

    I restored my ipod touch however the apps will not sync.  I tried to re-download but I changed my apple id as my old id is no longer a valid email address.  Any ideas out there please?

    It might be logical to someone, but not to me. I agree it's a pain.
    How did you change your Apple ID? Creating a new one is not what you want to do, but if you changed the ID associated with your purchases then that might have worked. You would need to sign in with the Apple ID on both your iPod Touch as well as in iTunes. I'm not sure how you changed it but clearly they need to match.
    If it's just your password that is not getting recognized reset it here: http://iforgot.apple.com/
    It will send an email confirmation to the email address associated with that Apple ID. The email address you elect to use might not look anything like your Apple ID. If you don't appear to get an email check your spam filter.

  • My iPhone camera will not open up. When I press on the icon it open and closes quickly. When I open it from my home screen it reboots my phone. What should I do?

    My iPhone camera will not open up. When I press on the icon it open and closes quickly. When I open it from my home screen it reboots my phone. What should I do?

    Tried that and it still isn't working. Not sure if it's software thing but I just noticed when I swipe up my control center the flashlight option is not available as well. I'm not sure why this is. I have a 5s with the newest software. That's for the suggestion

  • I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?

    I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?

    carolweiler wrote:
    I have Adobe Elements10. The RAW images from my new Canon G16 camera will not open. Do I need an upgrade?
    See:
    Camera Raw plug-in | Supported cameras
    You need the 8.2 version of the ACR module, and PS10 is too old to be updated.
    So, you can choose between 3 solutions:
    - update PSE to PSE12
    - use the Canon software to convert the raw files to the tiff format which PSE10 can handle
    - download and install the free Adobe DNGconverter which is able to convert a whole folder of CR2 raw files to the Adobe DNG raw format which PSE10 can handle.
    The last two solutions are free.

  • My ipod touch 4th generation 32gb will not turn on ive tried holding the on/off button down for 10 and more and also the home button and it will not turn on, i have tried this over several days and still no response

    my ipod touch 4th generation 32gb will not turn on ive tried holding the on/off button for more than 10 seconds and still there is no response i have tried this over several days and nothing is working - i have checked the charger and also have tried charging from the laptop so this isnt the problem - please help as i have not been able to use it fr ages

    Try here:
    iPod touch: Hardware troubleshooting
    Also try placing the iPod in recovery mode and then try to restore via iTunes.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • I have a white ipod touch 4 and it will not go into DFU mode. I know I am doing it right as I have 2 other black ones that I can put into DFU anytime no problems. The ipod works perfect besides that. Can anyone help?

    I have a white ipod touch 4 and it will not go into DFU mode. I know I am doing it right as I have 2 other black ones that I can put into DFU anytime no problems. The ipod works perfect besides that. Can anyone help?

    DFU or Device Firmware Upgrade mode allows all devices to be restored from any state.
    Above from:
    DFU Mode - The iPhone Wiki

  • My ipod touch go of and will not work untill i plug it back in to a ac power

    my ipod touch go of and will not work untill i plug it back in to a ac power

    You likely have a hardware problem like a dead battery.  To rule out a software problem try the following in order:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod
    If still problem make an appointment at the Genius Bar of an Apple store.

  • Ipod touch camera will not open

    after my first video with the ipod touch the camera would not open back up.Then i restored it and it worked fine until my next video then it froze up again.
    does not do this while taking a picture

    Try holding dwn the home button and the turn off button and reboot that might wrk

  • Camera will not open need help

    i have the 4th generation ipod touch and i have very few complaints the only thing i can really complain about its that when i try to open up my camera instead of opening up the screen stays black is there anything i can do to stop  this from happening

    I am trying to open some *.avi files in quicktime, they are from my security camera at home.  It will not open them, would anyone be able to help me?  It says I need a plugin but it does not tell me which one.
    Basically your player is telling you that you need to install the codecs that will play the compressed data within the AVI file.
    AVI is a legacy file container in which the tracks of data are interleaved to maintain synchronization. This data can be encoded using many different audio and video codecs. Your problem is to determine which codecs you need for the player you are trying to use and install them if they are available. Failing that, your will either have to play the files in a different player which has the codec support your require built into the app or convert the content to a compression format that is natively compatible with the player you wish to use.
    Since you have not stated what platform, operating system, and particular player you are targeting for playback, it is difficult to provide precise instructions for fixing your specific problem at this point. Suggest you try alternative players compatible with your system and platform to see if they will play the files, use a dedicated media information utility to determine the codecs needed for playback, or post a sample file for analysis.

  • IPod touch 3G - activation required, will not sync properly, freezes up windows 7

    Hi,
    I am having a lot of trouble with my iPod touch 3G.
         I had not synced my iPhone 4 and my iPod touch for about a month as I was re-inputting my music into iTunes - I didn't want to sync them when not all the music I wanted would be synced onto them. Prior to syncing the devices, one day my iPod randomly displayed the "activation required" notification and the "connect to iTunes" screen. Neither my iPod nor my iPhone is jail broken, so this cannot be the cause of the deactivation. All I use my iPod for is plugging into my stereo system.
         Regardless, I had finally managed to sort through all my music and had managed to sync my iPhone with no hitches. However, I ran into various issues with the iPod. A pop-up in iTunes said that it detect the device but could read it and that I would need to restore my iPod. So I did so (restored to the back-up). However, not even a third of the way into the restore everything just seemed to stop. My screen went black with only the mouse flickering. I restarted my computer and tried restoring it again (again to the back-up). It got further this time and actually managed to sync some songs (around 70 out of 850). However, a pop-up appeared saying that iTunes could not write from the song or disk. So I unplugged my iPod and plugged it back in and it immediately slowed down my computer. Chrome would not respond, Shockwave crashed, iTunes would not respond, etc.
         Anyways, over the past couple days I have tried restoring the iPod (to factory settings) and that seems to have worked. I no longer have the constant "activation required" notification. iTunes seems to be having trouble syncing though. It will get a couple more songs synched and then display another pop-up saying that it could not write from the song files and then the synching process just gets stuck. The iPod no longer displays the synching icon, but iTunes remains stuck on "finishing sync".
    (The problem cannot be with the songs as they sync perfectly fine to my iPhone).
         On my iPod it shows all the songs which are/should be synched onto it. The synched songs appear in black (like normal) however, the majority of my songs are in a light grey and cannot be selected or played (basically it has the information about the song, but not the actual file itself). I can also use Wi-Fi or Bluetooth. They are both greyed-out and say "No Wi-Fi" or "Unavailable" respectively.
         Just as a note, I am on Windows 7 and have McAfee Antivirus Plus. I know that some people have some issues due to the firewall but I unsure as to how this could be the cause when my iPhone syncs perfectly well under the same conditions. I have iTunes 10.7.0.21 and my iPod is running on 5.1.1. If you need any additional information please ask!
    If someone could please help, I would be extremely grateful! I'm at my wits end.
    Thanks!

    See if disabling the antivirus and firewall resolves the problem.

  • TS2771 itouch 4th gen camera will not open?

    Can anyone point me in the right direction? Our itouch 4th gen camera shutter will not open.
    Thank You!
    Ava

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • HT1351 My iPod Touch and my iPad will not sync with my laptop in iTunes. Apple say to open iTunes and click on preferences. I can't find preferences, where are they?

    How do I get iTunes to sync my iPod Touch and my iPad Mini? It was automatic till the last iTunes update. I have Windows 8.1.

    See TS1538: iOS: Device not recognized in iTunes for Windows.
    tt2

  • HT1386 ipod touch 3.1.3 will not sync. When I connect it through the USB Iphotos pops up. How can I get it to sync?

    I have tried to restart my computer, restart my Ipod touch and downloaded the latest Itunes and it will still not snyc to itunes. It opens up Iphoto everytime. My computer recently crashed and I took it into Apple and now have version 10.5.8. Could that be the reason? It was working before.

    Try here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    It is normal and expected for iPhoto to open since that is how you get the saved photos off the iPod.

Maybe you are looking for

  • Web Gallery photos bouncing back

    When sending photos from the iPhone to a Web Gallery, the message bounces back with this error: Relaying denied, try authenticating. I was under the impression that in order for a Web Gallery to show up on the iPhone, I had to be logged in correctly

  • BPM transformation multiline problem

    I have a transformation in an Integration Process. My Source Messages field points to a Multiline container element CollectDeliveries. My Target Messages field points to a non-multiline element SendShipment. When I check the Integration Process, I ge

  • Why am I getting Error code B01B3040 on my All In One?

    The lights are blinking and I can't stop them. I am getting Error code B01B3040. What is the solution?

  • Problems with Admin

    I am the only user of my computer but suddenly when I go to install updates it doesn't default to my username and when I type my username in it will not accept it. I know the password is correct because when I reboot I use it to get in my account and

  • Not getting full Gigabit Ethernet Speed on iMac Core Duo

    I am using Airport to connect to a Linksys Wireless Access Point connected to my DSL modem. I am using ethernet to connect to a 3Com OfficeConnect 8-port Gigabit switch. I have 2x 500 GB LaCie Ethernet Disk Mini's (with Gigabit interface) connected t