IPod touch 5th gen clicky home button?

Why is the iPod touch's (especially the 5G's) home button give off such a hard click? The iPhone's home button is very soft and silent. It's kind of irritating, because its so loud and feels like a hard button instead of a small touch piece. I know I'm not explaining very well, but I hope you understand what I'm saying if you have an itouch. Is there any way to fix this? I don't like it and I don't think it's really fair to iPod touch owners.

There is nothing you can do.

Similar Messages

  • IPod touch 5th gen. Home button stuck and power button not working! Please help!

    I have an iPod 5th Generation and the home button is jammed down! It felt sticky earlier but now it's stuck down. I used it when the home button wasn't working and had to use my notifications to change from app to app (as I didn't know about assistive touch). I turned it off, but now the power button is no longer responsive! The button isn't stuck, but it doesn't work anymore. It was working fine before, but now it won't respond. Please help!

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • My ipod touch 5th gen. 16gb ios 8.1.2 wont turn on, i press the power button and nothing happens, and my home button doesnt work, PLEASE HELP ME OUT!!!

    My ipod touch 5th gen. 16gb ios 8.1.2 wont turn on, i press the power button and nothing happens, and my home button doesnt work, PLEASE HELP ME OUT!!!

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ipod touch 5th gen will not turn on- home button stopped working months ago

    Hi,
    So I have a ipod touch 5th gen and it suddenly turned off and will not turn on.
    Okay, I just want to say first I know the answer would be to hold the top button and the home button at the same time until it turns on.
    The thing is, my centre home button stopped workings months ago so I was using the assistive touch.
    What happened:
    I was using my ipod and the battery was almost full. When I tried to use it 10 minutes later it was turned off and I can't turn it on. I tried plugging it on my computer and it will not recognize it.I also tried holding only the power button on top for a while but nothing happened.
    Any ideas?

    Try:                                               
    - iOS: Not responding or does not turn on           
    Ignore the reset and when it says place the iPod in recovery mode
    Place the iPod in recovery mode using one of these programs:
    For PC      
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                          
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iPod touch 5th Gen. wont start up past the apple logo,ive tried holding the power button and the home button,and it wont start up. What do I do?!?!

    My iPod touch 5th Gen. wont start up past the apple logo,ive tried holding the power button and the home button,and it wont start up. What do I do?!?!

    Try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • On/off button not working on brand new iPod touch 5th gen

    My daughter has just unboxed a brand new iPod touch 5th gen that arrived today.
    It wouldn't turn on so I assumed the battery was flat which I thought was odd but I plugged it in and it came on - 90% + battery.
    The on/off button does not do anything. We've pressed it, held it - nothing. If I press the on/off and the home button together, Siri starts.
    It will only switch off after a minute has elapsed. We can't do it manually.
    What's going on? Any ideas?

    If you have an Apple store nearby I would make an appointment at their Genius Bar.
    Apple Retail Store - Genius Bar
    Otherwise I would call Apple. You get at least 90 days of free telephone support.
    http://www.apple.com/support/contact/

  • Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road.

    Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road while driving. For that reason, I'm also not interested in adding in headphones or additional devices that have the desired button functions. Going both forward and back would be great but I would be pleased just to have a "sight-free" way to go forward.
    I've seen some mention here and there about ways to maybe change it so the volume buttons change tracks and holding the volume buttons changes the volume... but I don't know what's involved in that or if its even possible/recommended for a new 5th gen iPod. I think its a great device but its sadly lacking in music oriented functions and features... which is disappointing since music is why most people would bother getting one instead of some other "iDevice" :/

    Given that you cannot do what you have asked for, perhaps you simply need to find another solution to your root problem.
    Presumably, you want to skip to the next track because you don't want to hear the current one, and that is because...
    You don't like it.
    You've heard it recently and don't want to hear it now.
    Simply don't want to hear it at this time.
    For problem number 1. Don't put it on the iPod in the first place. (I know, obvious answer!)
    For problem number 2. How about playing from a Smart Playlist (initially created in your iTunes Library) which has only songs you've not played recently?
    For problem number 3. Hhhmmm! Create alternative Playlists for use in the car.
    As for going back to the start of the "now playing" track.... Well, if your Playlist has only songs that you really, really want to hear, then you'll be looking forward to that rather go back to the beginning of the current song.
    I'm not trying to be prescriptive, just giving you food for thought.
    (They are all cheaper options than buying a car which can control the iPod from the steering wheel.)

  • IPod Touch 5th gen no longer working with Mini stereo...

    I have an 'entertainment pack' in my Mini that allows me to connect my iPod Touch 5th gen to the car stereo (via USB & aux in cables) to both listen to it and scroll through my music through the stereo interface. I have had a few problems before with it not connecting but these usually resolved themselves within a day or so and I think were more to do with my lightning to 30 pin adapter than my actual iPod. However, since I installed the latest ios7 update a couple of days ago I cannot get it to work at all and keep getting a message saying 'this accessory is not supported' when I plug the iPod into my car. Any suggestions on how I can resolve this?

    Try another adopter, a genuine Apple one
    Next:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                  
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: Back up and restore your iOS device with iCloud or iTunes
      - Restore to factory settings/new iOS device.            
    Sometimes an iOS update breaks compatibility and you will have to wait for an update to either the car system or to the iPod

  • My iPod touch 5th gen can't play videos?

    I've had my iPod touch 5th gen since Christmas Eve and I haven't had any problems with it, but a few days ago it stopped playing videos and now - even though I have turned it off and back on and turned the wifi off and back on again - it still can't play videos off any site, Facebook, dailymotion, YouTube, nothing. But I can view webpages and get Internet connection just fine!!
    So if you know what I could do to fix it please help because it's very frustrating!!! Thanks

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • My iPod touch 5th gen does not respond properly when charging?

    Having real issues with my iPod touch 5th gen touchscreen not responding when it's on charge. Parts of the screen go dead or need several taps etc. Tried removing case etc. made sure I'm using included charger and directly to the mains not on an extension. Is it faulty?

    Some other users have reported same problem. I have not heard of a resolution. You can try:
    - Using another cable
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

    My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • TS1702 i if use "search" in music on my ipod touch 5th gen the result just show only album and playlist but nothing song result.whats wrong with it?please help

    i if use "search" in music on my ipod touch 5th gen the result just show only album and playlist but nothing song result.whats wrong with it?please help

    The users guide says:
    Spotlight searches the following:
    Contacts—All content
    Apps—Titles
    Music—Names of songs, artists, and albums, and the titles of podcasts and videos
    Podcasts—Titles
    Videos—Titles
    Audiobooks—Titles
    Notes—Text of notes
    Calendar (Events)—Event titles, invitees, locations, and notes
    Mail—To, From, and Subject fields of all accounts (the text of messages isn’t searched)
    Reminders—Titles
    Messages—Names and text of messages
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsynce all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I enable voice over settings on my Ipod Touch 5th gen. I can't disable it anymore. I off my ipod and now i can't open it. It doesn't accept my password. I can't open it anymore.

    Please help me. I can't open my Ipod touch. I enable voice over settings on my Ipod Touch 5th gen. I can't disable it anymore. I off my ipod and now i can't open it. It doesn't accept my password. I can't open it anymore. Thanks!

    Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see:
    iPhone: Configuring accessibility features (including VoiceOver and Zoom)

  • Problems after iOS 7.1.2 on Ipod Touch 5th Gen

    At about 3 hours ago my Ipod Touch 5th Gen turned off on me. It came back on itself, so I accessed the lock screen correctly put my password in and thats where my problems started.
    I put in the correct password it accepted it.
    The screen then changed to my background screen colour.
    Very quickly the screen went black and the apple logo came on (as if it was turning on)
    I repeated the process again and I can not access my home screen or any of the apps. It repeats itself.
    I've had all my apps crash on me ever since I downloaded the iOS 7.1.2 update.
    On the lock screen I can still access the flash light and both cameras?
    What I have tried:
    Turning it on and off.
    Charging it.
    Plugging it into iTunes.
    Reset where I hold the lock and home button.
    Nothing works.
    Its a 32gb Ipod touch 5th gen with about 6gb of storaged unused.
    I haven't dropped it or done anything unusual.
    At the time it crashed I was playing on Farmville 2 app. This app crashes alot could it have something to do with it?
    Please someone help me, I've googled it and can't find any problem like mine on here!
    I've only had it 7 months.
    Thanks,
    Nadia

    Then do this:
    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • Ipod touch 5th gen says not able to charge when imusing the cable that came with it

    My Ipod touch 5th gen says charging is not supported with this accessory when the cord im using is a cable that came with it and the cable is less the 5 days old. i also know the usb slot works for powering the ipod because it was before. i have treid useing different ports on more than one computer but with no luck. any help would be lovely

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

Maybe you are looking for

  • Error_Create Load table on target_NZ

    Hi, Following is the error I am encountering while executing a procedure of KM which is a test version:- KM_KIM MSSQL to Netezza (bcp-nzload) V4.xml. The procedure is run on Netezza Server. Procedure command reads as follows: create table <%=snpRef.g

  • Cannot Connect to the Internet ?

    So I am a new iPad user very new 3 weeks It started this morning when I downloaded updates to some of my apps - I then sync'd it with my itunes on my windows vista pc...then i noticed that the iPad screen looked really heavily pixelated in some of th

  • Oracle 9.0.1 with RH9.0  ./runInstaller

    Hi!! I am trying to install Oracle 9i with RH9.0 but I have a problem when I execute ./runInstaller Itializing Java Virtual Machine from /tmp/OraInstall/jre/bin/jre. Please wait... /tmp/OraInstall/jre/bin/../lib/i686/green_threads/libzip.so: symbol e

  • Adobe is not opening

    please help me every time i try to open cloud it opens but doesnt load the menu, its just black

  • Determining number of files in export

    Hello Assume I want to take an export of one schema which is 250gb (select sum(bytes/1024/1024) from dba_segments where owner='...') I want to take export in 2gb chunks. How can I determine how many file to specify in "file" clause of the export comm