IPOD TOUCH (5TH GEN) ERROR 4013

HI,
LAST NIGHT I WAS DOWNLOADING THE NEW IO7 UPDATE WHEN I ENCOUNTERED THAT THE DOWNLOAD TOOK ALOT OF TIME TO VERIFY, SO HALFWAY THROUGH THE SCREEN WITH THE APPLE LOGO, THE DOWNLOAD STOPPED AND THE SCREEN WAS BLANK.
LATER I DISCOVERED THAT THE IPOD WAS IN RECOVERY MODE AND THAT I HAD TO CONNECT IT TO ITUNES. THE IPOD WAS CONNECTED TO ITUNES UP TILL THE POINT WHERE I RECEIVED A MESSAGE 'THE IPOD COULD NOT BE RESTORED,AN UNKNOWN ERROR OCCURED (4013)
PLEASE HELP!

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Similar Messages

  • My daughter's ipod touch 5th gen is disabled with no wifi connection ..how do I restore it ? I have tried everything and Itunes keeps saying an error has occured

    My Ipod touch 5th gen has been disabled because I can't remember the passcode and has no wifi connection and when I plug it into itunes it says an error has occured. How do I fix it ?

    What error do you see when you connect it? This support document provides instructions on how to recover an iDevice that has been disabled because of a forgotten passcode. You need to restore the device. Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • Ipod touch 5th gen internal device error

    Hi
    I purchased an ipod touch 5th gen today and have had no luck getting my music onto it from itunes. Everytime I attempt to sync it either reads "internal device error" or "could not sync with this ipod as it was unable to be read from". I have tried restoring it twice with no luck. Help!

    What happens when you try to restore?
    Have yu tried another cable
    Try on another computer to help determine if you have a computer or iPod problem
    Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Whenever I try to sync my iPod Touch 5th gen with iTunes I get an error message saying "The iPod "*****" could not be synced because the sync session failed to start". Is there any way I can fix this?

    Whenever I try to sync my iPod Touch 5th gen with iTunes I get an error message saying "The iPod "*****" could not be synced because the sync session failed to start". Is there any way I can fix this?

    B-rock, thanks for posting the above.  I actually have the same issue, running Windows XP and I don't have that backup location, \Application Data\Apple Computer\MobileSync\Backup\.  When I go to Documents and Settings\(username)\ there's a AppData folder followed by:\LocalLow\DataMngr\ .
    I have the latest update, 5.0.1 and I have the iPod Touch 3rd gen.
    I have tried removing itunes and all that is associated with it then reinstalling and keep getting the same message.  I've reset my ipod thinking that would help but still, no backup.
    In iTunes, Edit, Preference, Device there are no backups.
    What am I doing wrong, can you help? 
    Thank you!

  • Can't activate imessage on my daughters ipod touch 5th gen.  Comes back with "An error occured during activation".  It was working until I updated to latest IOS version 7.1.2.  Can anyone help.

    Can't activate imessage on my daughters ipod touch 5th gen.  Comes back with "An error occured during activation".  It was working until I updated to latest IOS version 7.1.2.  Managed to update Facetime ok but can't do anything with iMessage.  Can anyone help?

    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                              

  • Ipod touch 5th gen backup error

    i keep getting an error when i plug in my new ipod touch 5th gen. Itunes could not backup ipod because the ipod is disconnected. my ipod is not disconnected its connected. ive tried following some of the other posts and that didnt help. its only 2 weeks old.

    Try rebooting the computer and resetting the iPod.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try another USB port
    - Try another cable. Some users have reported defects with the cable that came with the Lightning cable that came with the iPod (and iPhone 5)

  • My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

    My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I have numerous different apple products with the new lightening connector, all of which have broken or stopped working after just short periods of time, I have an iPhone 5C, and iPad mini and and iPod Touch 5th gen?

    Hi, I have numerous different Apple products, an iphone 5c, iPad mini and iPod touch 5th gen.
    I have had them all for only relatively short periods of time yet the lightning cable has stopped working on all of them?
    On the touch, charging has stopped completely?
    Is this a manufacturing issue with the new charging system?

    Hi, yes I'm using the original apple cables.
    This definitely isn't user error nor confined just to me, the devices are used by different people in the home.
    On a quick sample around the office (survey of 7 people let me add) 4 of them said the cables had broken on them and had to be replaced.
    Having also searched through the forums it appears this is a fairly widespread issue.
    It's defo not user error!

  • IPod Touch 5th Gen will connect to computer and display in iTunes, but will not turn on

    I've had my iPod touch 5th gen in a Lifeproof case and was taking some pictures, and lo and behold, the case seal leaked. I got water inside my case and immediately turned my iPod off and placed it in rice. After two weeks of drying in rice in a warm environment, I removed it and decided to try it out again. Much to my chagrin, my iPod would not turn on and could not be placed in recovery mode; I've tried to place it in both recovery and DFU mode, if only for some response, but nothing. It displays no screen image, no error message, nothing. It shows up in iTunes just as normal, with the name, and I can even view the sync menus for the device. However, I cannot access any pictures (my iPod has a passcode that must be entered first, and to enter the passcode I would have to turn the device on, which is so far impossible).
    PLEASE HELP. Lifeproof will replace my case but not my device, and I have several weeks of photos, lots of music, and unsynced apps. (I know I should have backed up more recently, but life gets busy and I wasn't anticipating such a problem).  

    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic. It could be that the water corroded the contacts so try to clean any corrosion from them.
    - Then charge overnight and try what you did before
    If still does not work:
    Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 5Gs.. They do not fix yours.
      Apple - iPod Repair price
    You can do it at an Apple store by making an appointment:
    Apple Retail Store - Genius Bar
    or send it in to Apple. See:     
    Service Answer Center - iPod

  • Ipod touch 5th gen, wont work?

    when i took the charger out of my ipod touch 5th gen , the screen went dark and wouldn't respond then it went black and wouldnt turn on. i thought maybe it was dead so i charged it for an hour but nothing came up on the screen it just stayed black. i tried restetting it but nothing comes up
    when connected to the computer it doesnt recgonise the device and says 'power surge on hub' ? so i cant fix it that way its only 4 months old and i dont know what is worng with it. it was working fine yesterday until i took the charger out.

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable. The 'power surge on hub' error is common for a bad cable
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Contact an Apple Authorized Service Provider
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • IPod touch 5th gen won't accept wifi password

    My daughter just got her iPod touch 5th gen 32GB (iOS 8.1.1) for x-mas and has had no problems connecting to our wifi until yesterday. It sees the wifi but when we ask to join, all of a sudden, it says "Incorrect Password for (wifi name)... " but i know it is correct.  I've tried to enter it dozens of times but no luck.  I've also asked other people to enter it but no luck there either.  All of our other devices can connect with no problem so I know its really not the password despite the message.  Our other daughter got an identical iPod touch at x-mas also and she hasn't had any problems connecting on her device.
    I have tried to reset the network settings twice now. I have also forgotten the network & tried to rejoin multiple times - no luck.  I've noticed none of the router or IP settings are showing on the device, even though that info does show on my iPhone 5s while its not connected.  It's like it see's the wifi but it's not receiving any info.
    Please help!

    Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Ipod touch 5th gen tilt function not working

    Hi
    I recently got a replacement (from apple) for my Ipod Touch 5th Gen 64gb due to the home button being broken.  It is running the latest software which I believe is IOS 8.1.1
    Note - other than the broken button I had absolutely no issues with my old Ipod.
    When I received the Ipod only 3 days ago I did the normal process of restoring from back up etc but have noticed that the tilt function is not working. 
    I have tried all the obvious solution - first being checking portrait orientation isn't locked, then resetting the Ipod via holding down lock and home button and finally I have done a factory reset and still have had no luck with this issue.  Is there an easy fix to this or am I going to have to go back to the Apple store?
    Thanks

    If you successfully restored (went through all steps without error) to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar                             

  • I have an ipod touch 5th gen. i first loaded itunes on a windows 7 64 bit machine. i then got a new windows 8 64 bit machine but itunes will not load on it. i keep getting 2503

    i have an ipod touch 5th gen. i first loaded itunes on a windows 7 64 bit machine. i then got a new windows 8 64 bit machine but itunes will not load on it. i keep getting 2503 & 2502 errors. some apple software loaded, but it will not let me uninstall it from the machine. any thoughts, about how to get itunes to run on my machine?

    Try:
    Trouble installing iTunes or QuickTime for Windows
    Next try posting in the iTunes forum

  • My iPod touch 5th gen won't turn on after updating to iOS 8 using the computer,help!?

    On my computer (using windows) I tried to update my iPod touch 5th gen to iOS 8 using iTunes, using this website http://www.gottabemobile.com/2014/09/17/the-secret-to-skipping-long-ios-8-downlo ads-and-problems/ as a guide.
    It kept coming up with this error http://support.apple.com/en-us/HT201442 after the update.
    Now my iPod won't turn on and it shows the charger with the lightening with an arrow above it pointing to the iTunes logo.
    So i plugged it into iTunes but i don't know what i'm supposed to do, any help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • IPod Touch 5th gen no longer working with Mini stereo...

    I have an 'entertainment pack' in my Mini that allows me to connect my iPod Touch 5th gen to the car stereo (via USB & aux in cables) to both listen to it and scroll through my music through the stereo interface. I have had a few problems before with it not connecting but these usually resolved themselves within a day or so and I think were more to do with my lightning to 30 pin adapter than my actual iPod. However, since I installed the latest ios7 update a couple of days ago I cannot get it to work at all and keep getting a message saying 'this accessory is not supported' when I plug the iPod into my car. Any suggestions on how I can resolve this?

    Try another adopter, a genuine Apple one
    Next:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                  
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: Back up and restore your iOS device with iCloud or iTunes
      - Restore to factory settings/new iOS device.            
    Sometimes an iOS update breaks compatibility and you will have to wait for an update to either the car system or to the iPod

Maybe you are looking for

  • How to configure Oracle Sql Developer for 9i

    Hi, We are using oracle 9i for existing application, and i am trying to connect oracle 9i through SQL developer 1.5.1, i got an error message "Unsupported Oracle Database Version". Appreciate if any body guide me in this. regards Husal.

  • Using external HD Cinema display and USB keyboard/mouse with "closed" MBP

    I have an early 2009 17-inch MacBook Pro and a ~2007 HD Cinema Display. I routinely hook up my cinema display and an external USB keyboard/mouse when I am at my desk, and I close the lid on the MacBook to just use the external display. When I leave t

  • Transfer of library to replacement iPod mini

    How can I transfer my existing iTunes library (currently on iPod mini [1st generation]) to my new replacement iPod (2nd generation)? Do I need to install the disc that came with the new iPod? If I want to install the new disc on my work computer (vs.

  • Disabling input option

    Hi, I am new to ABAP and I have a requirement where in I need to display two radio buttons with each radio button accepting one parameter. When the first radio button is chosen, the parameter of second radio button should be disabled. When the second

  • Adding Custom Texts to 0DATE Infoobject

    Hi ,   Is it possible to add custom texts to 0DATE infoobject. Also, from which table the standard texts show up. - KartheeK