IPod touch 5th generation doesn't: turn on, charge, reset, or respond to iTunes. What do I do?

There's no damage to it, all the button work fine. One day it just stopped working and now I don't know what to do.

Try:                                               
- iOS: Not responding or does not turn on           
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable                                                       
- Try on another computer                                                       
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
  Apple Retail Store - Genius Bar

Similar Messages

  • Ipod Touch 5th Generation will not turn on, restore, or show up in itunes unless in DFU mode.

    So a friend gave me his Ipod Touch 5th gen because he couldn't fix it himself and he bought a new one, and while I'm stoked to have a near brand-new Ipod touch, it's also frustrating me to the point I'm ready to give up on it aswell and pass it down the line. I'm not sure what he did to it, he says it just stopped working but you never know.
    Anyways, the problem is that it simply does not turn on regardless of what I do to it. When I plug it into the computer, it gets warm; usually a sign it's charging fine. However, it doesn't show up on Itunes. I read some forum posts and searched around other places aswell, and tried putting it into DFU/Recovery(not sure which is which anymore, it's the one where you hold down the power button for 3 seconds, then home+power for 10, then home button for 20). It showed up on Itunes, and said it needed to restore. I downloaded the 1.2gb update it needed, but then it hung at the "Waiting for Ipod" progress bar. As it does this, I get maybe 3-5 Windows 'bing' sounds of a connecting/disconnecting device, ending on a disconnect sound. Itunes eventually times out the restore with an error code 4005, which I read means the Ipod has been disconnected in the middle.
    After this, it doesn't show up on Itunes and I have to repeat the process to get it to show up again. I tried it a third time just now and it's still doing the same thing.
    Any ideas? Really at the end of the line on ideas I think.
    Please and thanks,
    -Cody
    P.S. I don't know if it matters but the warmth is coming from the top/camera end fo the Ipod. Not sure where the battery is versus the CPU, but maybe that'll help the diagnosis.
    P.S.S. Also, when it shows up in Itunes in recovery mode, it doesn't show a serial number, so I don't think an Apple store would even work on it without a serial #.

    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10-47, 1002, 1011, 1012, 1014, 1000-1020, 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Try on another computer.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    The SN may not show up because of a hardware problem and does not mean Apple will not help

  • My ipod touch 5th generation will not turn on and the home button doesn't work. what do i do?

    Hello my name is Leslie and i would like to ask you guys a question on how to fix my ipod or what is wrong with it. My ipod touch 5th generation will not turn on and the home button doesn't work. what can i do to fix it ?

    Has the home button worked in the past, or is this been something that hasn't worked for some time? The only way to reset the device is with the sleep/wake (power) and home buttons together. Without it, you would have to wait until the battery dies and then plug it in to try and reset it. The Home button is used for several user troubleshooting steps. Without it, you cannot perform a reset, put the device into recovery mode, or place it in DFU mode. You need to get the home button repaired.

  • The camera on my daughter's iPod Touch, 5th generation, doesn't work anymore. She just got it three weeks ago. Not even sure how to troubleshoot. Help.

    the camera on my daughter's iPod Touch, 5th generation, doesn't work anymore. She just got it three weeks ago. Not even sure how to troubleshoot. Help.

    Hard reset it and report back...thatll probably solve the problem

  • My ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything

    my ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything

    Get it fixed then, make an appointment with the Apple genius bar.

  • Can I get my front camera working? On my iPod touch 5th generation 16gb? As I've reset it all and it still isn't working.

    Can I get my front camera working? On my iPod touch 5th generation 16gb? As I've reset it all and it still isn't working.

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • I forgot the security answers on my iPod Touch 5th generation and it won't let me download anything from iTunes!!

    I forgot the security answers on my Ipod Touch 5th generation and it won't let me downlaod ANYTHING fron itunes and it's REALLY REALLY frustarting!!!!!!!!!

    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    How to Manage your Apple ID: Manage My Apple ID

  • IPod Touch 5th Generation won't turn on and the home button is broken, followed the steps from another thread but it's still not working

    I have an iPod Touch 5th Generation with iOS 8.1, my home button is broken and I've been using AssistiveTouch for months now. Today I just locked my iPod and it wouldn't unlock again, it doesn't respond at all, it won't turn on. It was almost fully charged, so it's not the battery. I followed the steps from this thread, but I'm still getting the "USBMuxListenerCreate: No Error" message in CMD Prompt. I bought my iPod abroad and even though I do have the warranty, I've been told at the iStore that it's not valid here, so going to the store isn't really an option. Any ideas how to solve this?

    Sorry, but without a working home button it is not possible to reset or restore your device. You should visit an Authorized Appel Service Provider or Apple Store to get it serviced. The warranty for an iPod is not limited to the country where it has been bought, check here: one-year limited warranty
    Jailbraking the device will void the warranty.
    You can check the warranty status by inserting the serial number on this page: https://selfsolve.apple.com/agreementWarrantyDynamic.do
    A list of Authorized Apple Service Providers can be found here: iPod touch - Contact Us - Apple Support

  • My iPod touch 5th generation won't turn on after the new iOS update

    I've just updated my iPod touch 5th generation to the iOS 8.1.1. (or whatever the newest update is) but once it updated, it now won't turn back on. I've tried plugging it into multiple chargers and computers just in case it wasn't charged, and tired turning it on, but all I get is the apple logo and nothing's happening. What can I do? I haven't backed it up this month and I don't want to loose all my stuff. Thanks.

    Try the following. It is very likely that the iPod will have to be erased:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    In the future make sure yo backup before updating. I always backup to both iTunes and iCloud before updating .

  • What do you do when your iPod touch 5th generation will not turn on, and it isn't in recovery mode?

    Today, my iPod touch 5th gen wasn't turning on, but during school earlier today it was working just fine. When I got on the bus, it wouldn't turn on? I got home and I plugged it into the charger and tried to see if it would turn on that way, nope. Also, there would be no way for it to be in recovery mode, because of the fact that the home button is pushed in and wont work. I've had my iPod for 2 years, is it just old and decided to give out?

    See this previous discussion
    Turn on without Home/Power Button

  • My iPod touch 5th generation doesn't come up in devices on my computer and i have forgotten the password... what should i do~?

    i am locked pout of my ipod touch 5th generation and it wont come up on devices... please help if you can! thank you!

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If necessary also see:
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X

  • I tried to charge my iPod Touch 5th generation but it died while charging  and it was tuning and it said i had to connect to iTunes so i did and i had to restore it to use it and while restoring an error code (9) appered and i can't use it. Plz help

       So  I was using my iPod Touch 5th generation and the charger wouldnt charge it and it died then while it was in the process of tuening back on the apple logo dissapeered and it kept on turning on and off so i put it into DFU mode and it said to plug it into itunes to i did and it said i had to restore it to use it but when i tried to restore it it brought up ," Couldnt restore ipod, error code (9) " ..... and i have tried 3 different USB cables and two different computers and USB ports and i have no clue what to do so i would like help from anyone please that would be awesome!!!!
                        Thank you, 
                                           Zac

    Zac henderson wrote:
    ...Couldnt restore ipod, error code (9) " ...
    Try here  >  Configure security software

  • My ipod touch 5th gen won't turn on or reset and my computer won't recognise it. It's 1 day old and all I did was try to plug it into the speaker system

    My ipod touch 5th generation was purchased brand new yesterday. After charging it and loading my music i went to plug it into my icoustic dock which I got as a bundle with the ipod only to have my ipod screen go blank and now it refuses to turn on, reset or get recognised by my computer or itunes. I have the latests software as it was only uploaded last night. Should I be taking it back to the shop? Has anyone else had a similar problem?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Ok my Ipod touch 5th generation will not turn on, and i have tried other steps i have seen like holding down different buttons and try to restore but it will not restore and no matter how long i hold down a button it wont turn on

    My ipod tocuh 5th generation battery died so i went to charge it and i would not charge so i did some reasearch and tried many steps such as hold down the buttons for a long time but nothing happened then i tried to restore it and it wont let it, it just comes up with error 1602 and ims cared i dont know what to do please HELP.

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • Ipod Touch 5th generation will not turn back on (won't recharge, and is not recognizable on computer)

    I recently bought my new ipod touch 5th gen, and was playing it (browsing on an app) until it randomly shut down without any warning or anything. I thought maybe the battery was low, but I was sure that my battery life was half way and also that it did not give me the "20% low battery" warning. I plugged in my ipod into my recharger just to be sure, but it would not recharge, the screen did not start back up. It stayed pitch black. I tried plugging it into my laptop, still the same thing happened. Furthermore, my laptop did not even recongise it at all. I'm not sure what is wrong with it. I even left my ipod plugged in for some time now, and still it appears to have the same pitch black screen.
    Please help, thank you. I appreciate it!

    Try charging the ipod touch on a wall charger and make sure the outlet is working. And leave it there for 10 minutes.
    Or try holding the power and home until apple logo appears.

Maybe you are looking for

  • Cisco 3650 Issue with 1231 AP

    hi all, i've got an issue with a new cisco 3650 48 port wherein older AP 1231 keeps on disconnecting. the connection is just a simple trunk. #sh run int g1/0/47 Building configuration... Current configuration : 62 bytes interface GigabitEthernet1/0/4

  • IMAQ Create for compressed .avi - cannot open the new file afterwards with IMAQ Open

    Hi there, i hope i'm in the right board. I recently tried to compress avi-files i collected from various cameras throughout the last years. At first i used VDub and ffdshow with a FFVH codec - it worked fine as long as i won't try to open the compres

  • How to delete pages in a pdf file

    how do i delete pages on a pdf file

  • New FireWire DVD Burner Plugged In - DVD Player Wants To Change Region?!

    I have just bought an external Freecom FW/USB 2.0 DVD Burner. As part of my testing, I inserted a DVD-R video I had made and attempted to view it via DVD Player. However, I got a warning window saying that as this was the first time I had played a DV

  • Adjusting Column After Splitting a Cell

    Hello, I am new with Pages and am amazingly impressed with all that it does. Perhaps I am pushiing it a bit too far but when I split a cell into two cells I am not able to adjust the size of any of the two cells. Is this normal? Thanks in advance. Fa