Ipod touch 6.1.3 not being recognised by iTunes 10.7

Just got a secondhand iPod Touch. It is on 6.1.3 and I have iTunes 10.7 running on my iMac 10.6.8.  As far as I can see 6.1.3 is supported on iTunes 10.7.  I tried the Apple trouble-shooting page but to be honest it wasn't that helpful.
If I set up Home Sharing then I can Home Share using the iPod Touch...which says that I do have connectivity at some level.  Just that it is not being recognised by iTunes and so I am unable to load my apps or transfer any music over.

Many thanks lllaass
I had gone through the first part without success but had decided not to go through the second stage. But following your recommendation I did just that and it works!

Similar Messages

  • Ipod touch 4 days old - not being recognised now on apple mac.  What is going on?

    I am totally disappointed with this Ipod.  I had it all set up a few days ago, which we had to do at home ourselves due to requiring our current passwords etc.   Today it is not recognised on the Apple Mac and the Apple ID cannot be found - it took too long to find it. The Itunes server is not recognised and for some reason I cannot find new updates for either product.  They both appear to be up to date.  Waste of my time.  I have spent hours trying to find out what is wrong with it,   I bought this in Perth at the only Apple Store last Saturday.  I have purchased itunes music and this was successfully downloaded to mu ipod a few days ago.  Last night I downloaded my CD's to the itunes library and haven't been able to put these onto my Ipod.  What is going on?????  I though Apple was a fairly straight forward reliable brand of product.  Your support page is not helping me at present.

    I have contacted Apple support on the above issues and will have to follow it up with them as it is more involved than what I have listed. Our Apple Mac laptop is not downloading the updates for software.  The iTunes site does not recognise the "server" (comes up with a message saying this) and apparently this is a known problem.  The Mac needs to have a more current iTunes update but as the computer won't install the updates (goes through all the motions from the software update on the apple icon at top right hand corner of page) , I can't use my iPod on the computer to get my CD songs that are downloaded onto the itunes library site (don't know how to get these either) and it doesn't appear to recognise my iPod touch.
    I also couldn't log in to the Apple site this morning, but later on at about lunchtime I could!  Bizarre.  Of course I haven't had any problems logging into this site with my password and ID at all today. 
    So, lllaass, I am going to try Apple support again via the phone and see what happens....I have a job number to quote them when I call them back.  Thanks for your suggestions - I am definitely not an IT whiz, but I do know that my iPOD did work forthe first day or so. 

  • My ipad (mini) and ipod are not being recognised by itunes?

    When connecting both my ipad(mini) and ipod(7th gen) they are not being recognised by itunes.  I last connected just over a month ago and everything was fine.  When I last connected I also connected my old ipod(3rd gen) to add new playlists beforing giving to someone else.  When I first plugged in I got a message saying that the cable was not Apple authorised - both my cables are cables supplied with my ipod/ipad so came from Apple?  When I run diagnostics it says
    "Most recent devices not currently connected,  - iPod Nano (3rd Gen) and iPad Mini running firmware 6.1.3"  This is the first time I have tried to connect since updated my iPad with IOS7?  Please help I wanted to put Christmas playlists on both devices.....!

    Device Not Recognised  >  http://support.apple.com/kb/TS1538

  • My "iPod Classic (60GB) Click Wheel" is not being recognised in iTunes although the iPod shows up in 'my computer'.

    My iPod Classic (60GB) Clickwheel is not being recognised in iTunes although the iPod shows in 'My Computer'.  The problem started with an error message in iTunes saying "Could not complete sync as devise may have become corrupt" and suggested I restore the iPod to factory settings which I have done several times.  I've carried out an error check in the iPod properties.  I've completely removed iTunes and all related software components in the correct order and reinstalled version 10.5.3. I have been through the 5 R's numerous times but still the iPod is not being recognised in iTunes. I have Windows XP, I'm tearing my hair out now so any help or suggestions would be great

    Try and force iPod into Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPod
    Note: You need to be patient and repeat the above many times to recover your iPad

  • HT1459 my ipod touch 4th generation is completely locked out. its not being recognised in itunes for us to do a restore. how can we reset the ipod?

    can anyone help with a completely locked down ipod touch 4th generation? its not being recognised in itunes!!!

    Download RecBoot and see if that will kick it out of recovery mode.
    Try doing a manual install following the instructions in the link below.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • IPod touch not being recognised by iTunes, recognised in "My Computer"

    Hello,
    I am running Windows 7 Ultimate, I have iTunes 10.
    I have tried restoring the iPod touch, I have tried switching it on and off. I have tried with each USB port, my security settings are fine. I have uninstalled and reinstalled iTunes, I have restarted the computer. I have reset the ipod.
    It has still not been recognised by iTunes.
    What can I do to get the iPod touch to be recognised by iTunes?
    vvv on "My Computer" at the bottom I can see this. Here I can access my DCIM folder, which contains some photos and videos.
    iPod information; Version: 5.1.1 (9B206) Model: MD057BT
    6GB 4th Generation
    Thanks,
    Aimee.

    So the Apple Mobile Device serviced is installed and running on your system? You tried to uninstall and re-install iTunes and all Apple related software? 
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Simply responding yes doesn't do much to help.  We need as much detail as we can get in order to help you troubleshoot this issue. Otherwise, we are just pulling at straws.
    B-rock

  • Ipod Touch (GEN 2) is not being seen under devices in my Itunes

    My Ipod Touch (GEN 2) is not being recognized under devices in my Itunes. My computer is recognizing it as a device under device manager, but it is not showing up under devices in my Itunes. I am also getting this error message saying "Itunes Could Not Connect to this Iphone because an unknown error occurred (0xE8000065)", and the weird thing about it is that i do not have an iphone but an ipod touch. I have followed the steps on the support website and they have not helped. Iam out of ideas and i really need some help. Please Help!!

    I would start here:
    http://support.apple.com/kb/TS1495
    (iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows)

  • HT201210 I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode.  Anyone know what's going on?

    I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode.  Anyone know what's going on?

    Try and force iPod into Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPod
    Note: You need to be patient and repeat the above many times to recover your iPad

  • My ipod has frozen and isn't being recognised by itunes

    Recently, my iPod has been having troubles. It's been freezing in the middle of songs and when I try to change track, and, up till today, it's recovered. It's now been frozen for three hours. I restored the factory settings a couple of days ago, and it workeds, but only for a few hours.
    This morning, it froze in the middle of the song, and it's now not being recognised by iTunes. I've tried to do a hard reset, but it's not responding at all.
    It's an iPod Classic 30GB, and I think it's a 5th Generation. I got it second hand, and so I don't think I can take it and get it fixed and whatnot without paying money. Is it worth getting a new iPod? There is an Apple store near me, so I can take it in and see what they say, but as I said, it's second hand and it's past the warrenty.

    Charge the iPod for at least 2 hours
    Do the iPod Hard Reset -> Press Menu and Center Button simultaneously for at least 10 secs till the Apple logo comes ON.
    Then release the buttons
    Refer to this Apple Support article on the 5Rs.
    http://www.apple.com/support/ipod/five_rs/classic/
    If you plan to get a new iPod, get the iPod Touch and avoid at all cost the iPod Classic, the new generation of HD in the iPod Classic appear to be not very sturdy and reliable, in my Opinion, yours is still more sturdy, (6 years old), but the battery and hardisk would be  in the last lap. The full charge battery should last at least 20 hours of continuos music.
    You can do the iPod Disk diagnostic to see the HD health, as posted by tt2.
    https://discussions.apple.com/thread/3110831?tstart=240
    Don't worry about the Mac user, the DD process refer only to iPod Classic.
    Have a nice day!

  • TS1591 my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything

    my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything

    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • My iPod Touch 3rd Gen, Does not show up on iTunes Devises  4.3

    My iPod Touch, 3rd gen, does not show up on iTunes 10. I feel I have exhausted al avenues. Diagnotics passed all tests but - The Connection Not Found. Continued on with there Help suggestions with no success.

    Which version of iTunes are you using?
    Stedman

  • IPod touch 1st generation could not be restore on iTunes, an unknown error occurred (1). how can i fixed this case?

    My iPod touch 1st generation could not be restore on iTunes, the message was "The iPod "iPod" could not be restore. an unknown error occurred (1)".
    my serial number is AB1905714N
    how can i fixed this case?
    thank you

    ERROR (1)
    - Place the iPod in DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - Try another cable           
    - Also, confirm your security software and settings are allowing communication between your device and update servers.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar     

  • Iphone is not being recognised on itunes to sync?

    Hi, I have connected my iphone to my computer but it is not being recognised on itunes?can u help?

    I just replaced my 3GS with an iPhone 4 yesterday, and the new phone will not sync with iTunes. It pops up with the following error message whenever I hook it up:
    "The iPhone "iPhone" cannot be used because it requires iTunes version 10.1 or later. Go to www.itunes.com to download the latest version of iTunes."
    I just got this phone from AT&T, and there are no updates available for either my computer or my phone, so they have to have the newest iTunes.
    Also, whenever I plug it in, the new phone does not appear under the "devices" tab on the left like my old one does.
    Thanks in advance for whatever advice you can give me.

  • I plugged my ipod in, and it is not being recognized in itunes, on the list on the left side. what do i do

    i plugged my ipod in, and it is not being recognized in itunes, on the list on the left side. what do i do

    Take it in for repair/replace to your local Apple retailer.

  • I have just reset my my iPhone 4s and it is stuck on the apple screen, not being recognised by iTunes and fully charged, any ideas how to get it to turn on properly?

    I have just reset my my iPhone 4s and it is stuck on the apple screen, not being recognised by iTunes and fully charged, any ideas how to get it to turn on properly?

    Hi Cjroyle,
    Thank you for using Apple Support Communities.
    From your post I understand that your iPhone will not boot past the Apple logo on the screen.  To troubleshoot this issue I'd like you to please follow the steps in the article below.
    iOS: Not responding or does not turn on
    Take care,
    Alex H.

Maybe you are looking for

  • Can I use AVG anti virous with the new download

    I run AVG free anti-virus , with some new Firefox upgrades the AVG got disabled or just wouldn't work

  • Cannot view topics in generated HTML help

    I am using RoboHelp HTML Version 11 with Windows 7 Enterprise/Service Pack 1. My problem is with generating HTML help files. It appears to generate and I get the message that it ran successfully. It even generates the CHM file, but when I click on a

  • Fax Email or Print customer statements (F.27)

    Hi. I am new to the forums. I have a user requirement to setup SAP to be able to send customer statements via email if email address is populated. If not, send via fax if fax number is populated. Otherwiese print. I have read a few threads that addre

  • Command authorisation in 8.4 for object network

    Hi guys, I just tried to do a quick privilege level setup for a user to limit access to asa. User should be able to add nat's to configuration. ASA 8.4 is in question and trying the following does not seem to work: privilege configure level 3 command

  • OVM 3.0.1 is slow

    Hi Guys, Here is my setup, 1x OVM Server, hostname ovmsvr01 with 16 cores and 16GB RAM 1x OVM Manager , ovmm as guest of OVM server, with 4 cores and 4GB RAM 2x Oracle Linux 5 , poc1 and poc2 with 4 cores and 4GB RAM 1x NFS repository from Netapp fil