Ipod touch 802.1x wifi

How do you configure the ipod to work with 802.1x wifi. It is suppose to work after the new update but doesn't seem to work.

802.1x is an enterprise-class service, so a desktop app was created so admins can generate and distribute profiles to their users. So, depending on which type of 802.1x auth you want to use, you'll need to use the iPhone Configuration Utility ( http://www.apple.com/support/iphone/enterprise/ ).
See the iPhone and iPod Touch Enterprise Deployment Guide for more information.
Got it working on my iPod Touch with 802.1x PEAP auth on our Cisco wireless network in the office.

Similar Messages

  • Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

    Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected.  Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices.  After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected.  Just can't seem to get it to generate an IP.  Any solutions other than turning it on and off again?  Not a Merry Christmas morning.

    Ok, so, a couple of things:  Denisefromwaleska and I have the exact same size/type/color iPod.  Now wishing I'd bought the black one maybe...
    Second, Airport is an Express and I have a second one that I carry with me when I travel.  Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem.  Updated firmware on my travel router, still could not connect to the internet.  Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod. 
    Thanks again for all your help, hopefully I can get a solution in place soon,

  • I bourght a new ipod touch for my wife, i put my apple id in for her b/c we were not home, how can I clear my

    I bought a new ipod touch for my wife, I put my Apple Id in to activate it, b/c we were not home, now that we are home I would like to set up a account (apple) of her own, so that it won't be interfering with my account. thanks for your help.

    Why not just erase the iPod and start over, using her Apple ID. Settings > General > Reset > Erase All Content and Settings, then you can start over with the initial setup of the device.
    Alternatively, your Apple ID may have been entered in:
    Settings > iCloud
    Settings > Messages > Send & Receive
    Settings > FaceTime
    Settings > iTunes & App Stores
    Sign out of your ID in these menus and sign in with your wife's Apple ID.

  • I'm using 4th gen IPOD touch and the wifi can't connect to my home NTWK, it sends me to a far distant IP ADDRESS and can't connect. a building public NTWK is wifi connectable

    http:/I'm using 4th gen IPOD touch and the wifi can't connect to my home NTWK, it sends me to a far distant IP ADDRESS and can't connect. a building public NTWK is wifi connectable, any ideas how I can resolve this WIFI issue??? TY
    [email protected]    

    Do other devices connect to your router?
    What do you mean by distant IP address? 
    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    -power off and then back on yur router
    - Reset Network settings: Settings>General>Reset Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • Ipod touch shows no wifi

    iPod Touch shows no Wifi - can't click anything.  Any ideas?

    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • Why doesnt my ipod touch see any wifi networks anymore

    Why doesnt my ipod touch see any wifi networks anymore

    OK, out of nowhere my 4th gen ipod doesnt see a wifi network. Its not grayed out I can still click the wifi to the on position but then it just stays on that screen where it should list the wifi networks and just keeps searching. I've taken it to multiple locations and still it doesnt see any wifi networks. My ipod is on the current ios version 5.1.1

  • I have a ipod touch that shows wifi in the settings but i can not click to turn on to access my wifi

    i have a ipod touch that shows wifi in the settings but no way to turn on wifi or access wifi

    Hi chevy_dude13!
    I have an article here for you that addresses this issue:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Help i have an old ipod touch today the wifi seems to be not working... I've been typing the correct password for my network but it doesnt work!

    Help i have an old ipod touch today the wifi seems to be not working... I've been typing the correct password for my network but it doesnt work!

    If you are sure that your password is correct try restarting your router by removing power to it for 30 seconds and restarting. On your iPod go to Settings > General > Reset > Reset network settings. Now try to connect.

  • Hey I have an iPod touch 4g (without wifi at home but ethernet to one computer) and when I sync, nothing comes on my iPod. Any Ideas?

    Hey I have an iPod touch 4g (without wifi at home but ethernet to one computer) and when I sync, nothing comes on my iPod. Any Ideas?

    Here:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    An appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • New ipod touch cant read wifi

    Just got a new iPod touch for my daughter. Have connected to Wifi as I do via my iPhone but it is unable to read the Wifi connection even though the Wifi symbol is shown.
    My Iphone seems to have a problem too however other devices in the house can connect no problem to the same Wifi.
    Has my Wifi become apple phobic ?
    Any suggestions.
    Thanks
    Colin

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • IPod Touch 1st Gen - Wifi issue

    I have been using the Wifi on the Touch perfectly within my home network, but just recently it now doesnt obtain an IP address from my router.
    I have removed the connection, 'Reset Network Settings', disabled and enabled Wifi, tried joining my SSID (which it does do) but nothing, it comes out with a 169.254.x.x address. Wireless appears to be working as it can see neighbours SSID.
    I changed the name of the wireless SIDD, Touch found it, joined to it, no address. I have checked the DHCP range and there are plenty of addresses.
    Any other ideas to try? I haven't done a full system restore yet, hoping to resolve it without having to try that.

    Hello several suggestions below
    1. Ensure the iPod Touch has latest available update if it does not already
    http://www.apple.com/ipodtouch/softwareupdate.html
    2. Ensure your router has the most up to date Software/Firmware installed. If you know how to obtain this simply visit router manufactures website for more info. Otherwise contact router manufacture for assistance.
    3. Make sure router is broadcasting in Mixed Mode or at least 802.11 B/G Mode or G mode only if you can. And keep WiFi security off for now. If it connects with valid IP address proceed below for WiFi security options
    4. WiFi Security Options
    WEP 128 bit 13 character passcode made of numbers or letters or combo of both but needs to be 13 total no more or no less.
    WPA/WPA2 Personal - 8 character passcode or longer.
    *If you find it connects with password and still works with valid IP address you are ok to go from there.
    5. Check Mac address filtering. If you have it turned on this could be a small possibility why it is not sending out proper info. So either add your WiFi address into the router area for Mac addresses or turn off Mac address filtering on the router.
    -iPhone Wireless Address can be found by going to Settings - General - About
    6. Restore iPod Touch as new iPod Touch. Please ensure all data is properly backed up to your computer before you sync data back to iPod Touch.
    iPhone and iPod touch: Minimum system requirements
    http://support.apple.com/kb/TS1323
    Backing Up, updating, and restoring your iPhone and iPod touch software
    http://support.apple.com/kb/HT1414

  • HT2480 iPod touch 5 dropping wifi

    My iPod touch 5 I just got it for school and the wifi keeps dropping a lot and at school they have wifi but the wifi does not drop there it only happens when I am at home or some store 

    Since it works at school fine, that would point to a problem with the wifi network at home and in some store.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network       
    - iOS: Recommended settings for Wi-Fi routers and access points

  • My Iphone/ Ipod touch 4th gen WiFi problems and solution

    Just wanted to let people know the problems that I had with my 4th gen Ipod touch and Iphone 4 WiFi connections (and my solution).
    I was having consistent problems with my WiFi connection at home - my devices were connecting fine to the router and apparently the signal was full strength; however, nothing was working properly (internet, itunes, app store). To be specific the devices would work for 5-10 minutes but then the connection would start to falter. My other wireless devices were working fine (HTC Hero, laptops etc.) - just the ipod and iphone seemed to suffer from this signal problem (although the router was always apparently connected).
    Obviously, I read countless forums to try and diagnose the problem. There seemed to be a litany of possible causes and I tried the following to resolve the issue:
    - updated router (Netgear WGR614 v6) firmware
    - rotated wireless encryption (WEP/WAP/nothing)
    - changed router channel
    - reset router power
    - reset network settings on Apple devices
    - changed g and b settings on router
    Nothing seemed to work so I began to question the hardware i.e. the router (which I knew was working from my other devices) and the iphone/ipod.
    I tested my iphone and ipod on other wireless networks (McDonalds in the UK has free WiFi) and found that, in contrast, they worked fine on other networks. I had read a few posts from people saying that my router was perhaps too old. So as a last resort I bought myself a new router (Netgear WNR2000 v2). I was loathe to do this earlier in case it didn't work, since reasonable spec routers are £50
    Anyway it worked ... straight away. I have tested the new connection at home using this SpeedTest app. D/load = 9.01 Mbps, U/load = 0.46 Mbps, Ping 65ms. The router is using the full encryption (WAP2 something ...) and N connection.
    As you can probably tell I'm no WiFi expert - I just wanted to post this in case people are having similar issues with older routers. I wasn't able to find any definitive advice and solutions from other users so I though I'd contribute here, which I guess is the first port of call for new Apple users, like me
    I bought the new router 10 days ago and have been enjoying my full speed connection ever since - touch wood. Hope this helps.

    Sounds like an intermittent contact problem some where eon the logic board. Hard to trace down and fix

  • How can I locate my lost iPod touch within my WiFi network range?!

    I am still using my 1st gen iPod touch from 2008 for apps and music and other uses.  I rely on it quite a bit although of course I have a separate cell phone for now (will eventually get an iPhone).  However, I synced it with iTunes right before going on a long shopping spree Thursday afternoon then hooked it to my car's stereo system to listen to as I often do.  Upon returning home, tired and with multiple bags, I was trying to juggle them all on several trips from my car to front door (about 30 ft.).  The iPod touch always picks up my WiFi network in my car as soon as I pull in, and with my hands full on my last trip I realized I'd forgotten to disconnect my iPod touch so I could bring it in too.  I'll admit I was getting bogged down and annoyed so I disconnected it then remember also dropping some bags and picking them up from the parking space.  An hour later, after finally getting most bags and myself at least somewhat settled, I remembered I hadn't reconnected my iPod touch to its JBL docking system.  I soon realized I couldn't find it in the house and went with a flashlight to look in the car and outside between the house and car.  I searched for hours in all likely places and again the next day.  I also thought about an hour after losing it to check AirPort Utility's advanced pane which includes the logs, wireless clients and DHCP clients.  Sure enough it was still picking the device up, every 30 minutes or so periodically showing "binding added" and "binded dropped" for my iPod's IP address via NAT, and also "associated with" and "disassociated with" the iPod's unique MAC address.
    My worst fear was that I dropped it outside and someone dishonest took it, but that seems unlikely because I really don't have those kinds of neighbors and I searched immediately for it everywhere it could be (in my car, under it, outside everywhere I walked, in the house in the oddest places like under furniture, in discarded shopping bags, the trash can and even the freezer!  Sure enough, for 13 hours AirPort Utility showed activity contacting (or detecting) the device as mentioned above, until about 9:30 the next morning.  Since then there has been no log activity detected, and the device itself listed with MAC address has also disappeared under the "DHCP Clients" pane of AirPort Utility. I realize this could simply be the battery dying after all this time (although it should be in sleep mode), but the point is it was close by for all that time even after I'd searched for it, so it is unlikely someone found it easily after I searched everywhere I'd been in the short distance from parked car to home.  It also has a black rubber "suit" so the entire thin 8GB device is thin and completely black all over, further disguising it, especially at night.
    My question is that since this is not an iPhone and I cannot "call it" to find it, and it is only a 1st gen. iPod touch without a built-in speaker to make loud noises unless hooked to headphones or a line output, how can I find it?  It does make the tiny super high-pitched digital beeps when I get a "push" notification but I don't see how that does me any good unless someone from an app I use tries to contact me while I'm in extremely close proximity to hear those faint tones. Anyway, I really do need it and it's driving me crazy knowing it is within such a short range from me either inside my house or car (or outside in a short straight path from car to my doorstep) yet I am helpless.  Is there anything anyone can suggest?  It's almost worst than knowing I lost it anywhere, because I know it's here, but want to find it soon before someone else does (if outside) or the trash gets thrown out (if it fell in there) or it gets run over if on the street somewhere I missed. 

    There is no way to automatcally locate it.
    Since WiFi does not travel far talk to your neighbors. Perhaps one of them (or their children) found your iPod.
    If this does not work make a more thorough search of your house to find it.

  • Ipod touch 1G "no wifi" grayed icon after upgrading to 3.1.3

    Hello there,
    After upgrading my ipod touch to 3.1.3., the wifi icon gone gray and I have no chance to change any wifi settings. I've tried at at least 3 places with different routers where other devices (notebooks, PSP, DS), work fine, so I'm sure it's not an access point problem. Also I can't change any of the wifi settings. I've tried everything (clearing safari cache, history et all, reset network, reset ipod, restore ipod), and nothing seems to work.
    The ipod is out of warranty and I wonder if there is some way to "downgrade" it to the previous version or any solution for this problem.
    Thank you in advance
    When I tried to report a problem on the link at the receipt for the update, the screens shows like:
    <?xml version="1.0" encoding="UTF-8" standalone="no" ?>
    - <Document xmlns="http://www.apple.com/itms/">
    - <Protocol>
    - <plist version="1.0">
    - <dict>
    <key>pings</key>
    <array />
    <key>failureType</key>
    <string />
    <key>customerMessage</key>
    <string>Sign in to report a problem.</string>
    </dict>
    </plist>
    </Protocol>
    - <Dialog>
    - <plist version="1.0">
    - <dict>
    <key>kind</key>
    <string>authorization</string>
    <key>message</key>

    Restore your touch via iTunes. Select "Restore as new" when given the option.
    The stuff you got on your PC screen was caused by a basic incompatibility between your browser and the Apple website. Update your browser.

Maybe you are looking for

  • InDesign CS5 ePUBS Image Consistency across platforms

    Hello! I have a question I've been asking myself for months, and finally made an account here for the Adobe Forums, which seems to be pretty much the only place with useful information about ePubs. I work in a company that's planning on transferring

  • Can't get Line6 KB37 Keyboard to Trigger ezDrummer Samples

    I have KB37 and use Logic 9.1.5 Express (Mac Snow Leopard) and ezDrummer. How can I trigger the drum samples from ezDrummer through my KB37? I can use the default midi drums in Logic just fine through my keyboard, and I can see KB37 when I open a  ne

  • How to create a procedure function with a return value of ref cursor?

    Can anybody provide a sample about how to create a procedure function with a return value of REF CURSOR? I heard if I can create a function to return a ref cursor, I can use VB to read its recordset. Thanks a lot.

  • Installation Failed –  Your installation encountered errors.

    After downloading the trial version of CS6 Master Collection (with Download Assistant) I tried to install it, but after the initializing this popup came up: I restarted, exit all application, I don't have any virus checker, firewall turned off, and r

  • Module Programming...!!

    Hi ,             In Se80 ...i have created a subscreen.In PAI,we are giving one populating Message. it has Conitue and Cancel.                Once user clicks for Continue,I want it shld reach in it's initial screen. leave Screen etc etc is not worki