IPod touch and AV cable
If I connect my iPod to a TV through AV cable (from Apple or other provider, connected to 30-pin socket), will the iPod's screen while watching a movie turn off to save battery?
the Apple av cable comes with a usb power adapter.
heres a link
http://store.apple.com/us/product/MB129LL/B?fnode=MTY1NDA0OQ&mco=MjE0NTAzOA
Similar Messages
-
I just downloaded a new software update to my ipod touch and now the ipod and screen are frozen. I received a message that the download was not successful and now my screen is showing the blue round itunes symbol with an arrow pointing to the symbol and shows a cable below it. I have tried the restart of pushing the two buttons together and waiting 10 seconds for the apple symbol which appears and then go backs to the same stuck symbol. My computer is not recognizing the ipod either and will not connect. What needs to be done? Thanks.
Try manually placin the iPod in Recovery Mode and restore via iTunes.
Next try DFU mode and restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
IPod touch and av composite cable
Hi-
I just bought an av composite cable to try to watch netflix on my tv. After playing with it all night, I can't seem to get it to work.
Any suggestions??????
Thanks!!I'm having trouble also. I have the 8g IPOD Touch, and I get absolutely nothing. BUT when I connect the Nano I get a signal for only a minute, and then it turns back off again, and I have to re-do the whole process again. This really *****!!
Do anyone know what I am doing wrong? Please respond to me directly: [email protected] -
Usb cable not connecting ipod touch and iTunes
when i connect my ipod touch using usb cable with mac..itunes is not detecting it..even itouch is not charging..what should i do?
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar -
i am trying to put music into my 3rd gen ipod touch and older ipod shuffle but neither are popping up on itunes, what could be the problem?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have a 3rd gen Ipod touch. When I connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I make this older iPod show up on my iTunes?
Hi ChristianHelpplz,
Thanks for visiting Apple Support Communities.
It seems like your iPod touch is not recognized by iTunes on your Mac, but your iPhone 6 is working normally.
I recommend starting with these steps to troubleshoot your iPod touch and connection with your Mac:
Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Restart your device
Restart your iOS device or reset your iPod.
Restart your Mac
Turn your Mac off and back on.
Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
From:
If you don't see your connected device in iTunes for Mac - Apple Support
If you've tried these steps and your iPod touch is still not recognized, try placing it into Recovery Mode next:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Sincerely,
Jeremy -
I couldn't sync my Ipod touch, and kept getting an error message. So, I did a restore. Now my touch is stuck on a screen showing a white usb cable and the ITunes logo, which I assume is telling me to connect my Ipod to the computer. But I did that (obviously) or I wouldn't have been able to do the restore in the first place! I tried starting over and held the power and home button until I got a message on ITunes that the device needed restoring - I went through the steps again and am right back at the same screen. Any ideas??
Make sure you are following the instructions in this procedure to the letter.
Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. Be patient since it sometimes takes several of these attempts before you are successful.
If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the device in iTunes and choose "restore from backup". This assumes you have a backup. If you do not, you will have to download all your purchased iTunes content again. You do not have to pay for anything you already purchased.
If you still can't get it to work, you have done all you can and only Apple will be able to help. -
My iPod Touch and iPhone 3G do not get recognized as a device by iTunes
Both, iPod Touch and iPhone 3G don't show up on my macbook and do not get recognized as a device by iTunes. I switched cables, restarted macbook (and the other devices) and did an iTunes update. Still nada, niente, rien, nichts and nothing... any guidance or help? appreciate it, thanks
Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Do not forget the Additional Information topic near the bottom of the article. -
How come my iPod touch AND my iPhone will no longer sync with my iTunes?
for some reason the past few days ive been trying to back up my iPod touch and my iPhone 4s on itunes and its not discovering it. ive done all the steps on the support page. ive reinstalled itunes, ive shut the computer off and rebooted. rebooted my phone and the ipod and still nothing. ive tried multiple usb ports that are on my laptop. ive went into computer management and its still not seeing anything. i know the cord is fine because its less than a week old and when i plug it in, the devices are charging. someone please help!
Did you do eveyrthing in the following:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Including removing and reinstalling all the Apple software by:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
The above include a link for XP
Do you have another cable to try? The charging and data use different conductors/contacts so it may still charge with a bad cable. -
IPod Touch and 5G not recognized by WinXP Computers
I am not very good at troubleshooting iPods and I thought this would be the best place to find some help. Thank you in advance for any suggestions.
The problem: I have an iPod Touch and iPod 5G that are not recognized by a Windows Computer. I have tried several troubleshooting steps and I will just outline everything step by step. Neither of the iPods show up in device manager, and when I try the "Run Diagnostics" in iTunes it shows that no iPod is attached. I've made sure the iPod service is running and tried stopping and restarting that also- but the iPod never shows up under Device Manager.
1. I have tried the 5R's several times. Each iPod has been reset 3 times and iTunes uninstalled and re-installed 3 times.
2. I have tried a total of 3 Windows Computers all with the same problem.
3. I did a factory restore on one of the computers just to troubleshoot an OS problem. The restore had no effect. It was a "destructive" restore meaning the disk was formatted- not just a repair.
4. When each of the iPods are connected, the screen lights up and the charging indicator appears.
6. I installed an add-on USB card in the computer I restored- but this made no difference.
7. I have tried restarting the computer with the iPod attached.
8. I am using the same USB cable for each iPod.
That is about all the detail I can think of. Typing this out makes me thing I need a new USB cable- but they are charging ok.
This problem has been going on for about 6-7 months but I finally have some time to try and get it fixed. It would be nice to have some new music on them.
Thanks for any help!
Message was edited by: Elektrobot
Message was edited by: ElektrobotThere are two separate drivers that need to be loaded on your PC. The 5G uses the older driver, and troubleshooting for it can be found in this article: http://support.apple.com/kb/TS1538
The iPod touch/iPhone uses something called Apple Mobile Device Services to communicate with iTunes. This one is a bit different in that the touch/iPhone will not show up on the desktop as a device. For troubleshooting tips, see this article: http://support.apple.com/kb/TS1567
Good luck and write back if your problems continue. -
Both my iPod touch and iPad have been syncing properly with iTunes, until todat that is. I downloaded iTunes 11.1.5 and now iTunes isn't showing up/reading/detecting any of my devices. I can no longer sync both my iPod touch and iPad. Please HELP
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates -
Problem with Ipod Touch and new software (2.2.1)
After upgrading to the 2.2.1 I have been unable to listen to it using my car stereo. It will only recognize my ipod sometimes and when it does a majority of the time there will be no sound at all. On my car stereo it shows my playlists and everything but no sound. I never once had a problem with my ipod or stereo until I did this upgrade. I tried switching out the usb cord but that did not help. I then restored my Ipod. I also tried to wipe out the battery completely and then charge (heard on a different message board that that could possibly help). Still having the problem though. I have an Ipod touch and a Pioneer stereo with the USB cable hook up.
yeah i'm having the same problem i have a pioneer navigation system and it will not play my ipod touch after upgrading to 2.2 i called apple to try to find a way to downgrade and they never gave me an answer
-
Problem with iPod Touch and Nissan Car Interface
I have an '09 Nissan Murano with the built in iPod interface. Previous to upgrading to the 3.0 update, the iPod touch and car got along great and everything worked well with the car being able to control the ipod and play music with only the dock connection (not needing to use the headphone jack). However, since the 3.0 update, the car will no longer see the iPod. The iPod shows the Connected to Accessory screen (as it did in the past) however every few seconds, the iPod will flash a quick screen of the iPods normal music screen, then go back to the Connected to Accessory screen. The car just says iPod Not Connected.
Like I said, it worked perfect before I upgraded to 3.0, and to further that, my brother has his touch still on 2.0 software, and it works fine, leading me to be sure that its a problem with the 3.0 update and not the car. I've seen posts like this with other vehicles, but no one seems to have an answer. Wondering who else is having problems like this and if there is ANY solution (besides rolling back my software).
The fact that an update disables iPod branded interfaces seems ridiculous to me. Thanks for any help!I recently purchased an infiniti FX35 with the ipod integration. After visiting the local apple store "Genius Bar" and speaking on the phone with an "apple expert"; neither the genius bar or the apple expert heard of such an integration option in new cars being sold. They wanted more information from me about how it work rather than them assisting me with my problem.
Anyway, after alot of experimenting I got my ipod touch 2G running firmware 3.1 to work somewhat consistently.
Turn off wi-fi on the touch, power off then back on, go the ipod menu and select playlist. Attach the touch to the infiniti supplied cable through the dock connector. Select the ipod option from dash board. Playlist, songs, artists, etc will appear on the dash display and begin playing. -
ITunes can't find apps on iPod Touch and doesn't sync album artwork
Ugh. Here I go again.
I have an iPod Touch (4th gen), 2010 MacBook Pro, all the latest operating systems and updates.
My iPod Touch crashed a bit and so I wanted to sync it again (using the USB cable, not wirelessly).
(1) Suddenly, there was no music on the iPod Touch. I managed to get that fixed.
(2) After a couple of syncs, I was repeatedly getting the message that the iPod Touch apps "could not be synced because the apps could not be determined." A couple of plugging and unpluggings allowed iTunes to "find" the apps, but this is weird.
(3) And now, what's bugging me -- and this happened a year or so ago -- very little of the album artwork synced over to the iPod Touch. I have 600-800 albums. All of the artwork is correct on iTunes. About 10% of the artwork transferred over to the iPod Touch. (Then I synced my iPad, and all the artwork is correct on the iPad.)
If I remember correctly from last year, eventually -- after many successive syncs -- the album artwork made its way correctly over to the iPod Touch, and maybe I'll hope for that this time.
Does anyone have a more direct solution? Checking and unchecking some boxes on some syncs? (It takes a good chunk of time to sync over my music, so I don't really have to time to delete and sync repeatedly just as shots in the dark.
Any ideas? All thoughts welcome. Thank you!Taking off all the music and then putting it back on took care of the album art, but I'm still getting all kinds of funky behavior -- iTunes can't find the apps, then it can't find the iPod altogether, and it's adding duplicate songs somewhere. It said it was going to load 3,232 songs, but I ended up with more than 3,400. Weird.
Maybe you are looking for
-
Adobe Connect 9 on premises: how to give public access to a meeting recording?
We are using Adobe Connect 9 Pro on premises. We record meetings. Is there any way to make the meeting available to public viewers without forcing a logon? Thanks.
-
How can I maintain my calendar in my iphone 5. Because all the times that I charge it the calendar is in blank and I have to turn it off in the Ajustes and I have to turn it on again and fusionate wiht icloud, but to do this all the time...... really
-
Finder File Structure of iMovie 08
Is there any documentation on the Finder file structure that iMovie 08 uses for Events and Projects? While trying to move files to an external hard drive because the start-up disk was getting full, my father messed up his iMovie 08 files. I recombine
-
I am trying to set up iCloud to sync my Outlook Calendar however it keeps failing due to 'an unexpected error' but it doesn't say what the error is! Any suggestions would be gratefully received.
-
DDIC and SAP* locked due to bad logins
Hi! I'm setting up a WAS 7.0/CRM5.1 system and have encountered som problems. My DDIC and SAP* users have been locked in both the production client and the 000 client. I found a note on how to solve this and that was to delete the SAP* from the USR02