Ipod touch charger work with a Kindle 3?

Will my Ipod touch charger work with a Kindle 3 3G?

If you want to charge a touch gen 4 or less, then absolutly (It just might take a little longer than one specifically for the touch, because of watt dierences I think). I'm not sure about gen 5

Similar Messages

  • Will a ipod nano charger work with a new ipod touch?

    will a ipod nano charger work with a new ipod touch?

    If you want to charge a touch gen 4 or less, then absolutly (It just might take a little longer than one specifically for the touch, because of watt dierences I think). I'm not sure about gen 5

  • My ipod touch isnt working with itunes so i can put new music on it and it keep saying that my ipod is a camera device so what should i do?

    my ipod touch isnt working with itunes so i can put new music on it and it keep saying that my ipod is a camera device so what should i do?

    Hi heggedus,
    This article contains information on iTunes Store connection issues:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Take care,
    - Ari

  • Does the Ipod Touch 4G work with any Wireless G Router?

    I have a Netgear WGR614 Router(wireless-G). Will the Ipod Touch 4G work with it at all? Please respond. Thank You.

    lllaass wrote:
    It should work since the 4G supports a, b,g, and n bands. However, some users have reported problems with older routers. I have an older b/g LinkSys router and my 4G iPod and iPad works fine.
    Hi IIIaass. If you have problem with older routers, Apple recommends you update the router firmware.
    Regards
    Andy

  • Does ipod touch only work with wi-fi? Can I download games through home mac?

    Does ipod touch only work with wi-fi? Can I download games through home mac?

    iPod touch is Wi-Fi only, yes. I'm not sure exactly what you mean by games from home Mac, but you can purchase game apps in iTunes and sync them to your iPod.
    Merry Christmas.

  • IPod Touch not working with Verizon fivespot modem

    I cannot get my iPod Touch to work with my Verizon Fivespot hotspot. The hot spot shows up in the WAN settings, but when I try to reach the internet it says it is not available. The Touch works fine with my home hotspot. Any ideas?

    Do other devices work with it? What says "not available"? Is it Safari when you try to connect to a website? If you go into the network settings what IP address is assigned to the iPod? Do wifif arc show on the upper left? Have you looked at the documentation for the Verizon product?

  • How can i set up my iPod  touch to work with a wireless keyboard?

    How can I set up my iPod touch to work with my wireless Apple keyboard?

    What Apple keyboard?The original Apple white keyboard with four batteries tonot work with any iPods
    What model iPod? Only the 3G and later support BT keyboards
    iOS: Third-party Bluetooth headsets, headphones, and keyboards
    Wireless input devices: Bluetooth frequently asked questions

  • IPod Touch stopped working with iTunes with OS upgrade

    I have a problem with my iPod Touch connecting to iTunes. It is a new
    It has worked fine in the past, but stopped working once I upgraded from OS 10.4.x to OS 10.5.. I can still see/ sync my old 3rd generation iPod just fine.
    I am currently using iTunes 8.0.1. The iPod is charging fine with the cord provided. The iPod works fine, but I would like to load the Apps I purchased and update the podcasts I listen to.
    Any suggestions will be appreciated.

    I apologize for posting a bit early.  Found an Alpine manual online and i needed to set the AUX port to off.  They also recommended a reset of the Touch.  After doing these two things it is now working.  Maybe this will help someone else.

  • IPOD TOUCH NOT WORKING WITH ITUNES

    I am using:
    iPod Touch 16GB 1.1.4 (With $25 Software Upgrade)
    Windows Vista Premium Edition
    iTunes 7.6.2
    Whenever I connect my iPod, the device connect sound is made and it shows up in the my computer window, but it will not show up or sync with iTunes.
    I HAVE ALREADY TRIED THE FOLLOWING:
    Reseting the computer
    Reseting the iPod
    Using a different USB port
    Using a different cable
    Erasing ALL of the iPod's contents (Yes I lost my $25 update as well)
    Restarting the "APPLE MOBILE DEVICE SUPPORT" in the "systems" application
    ...As well as many other things, all with absolutely NO results.
    I have tried to manage my ipod through other programs, nothing seems to work. I connected the iPod to a different computer and everything worked fine.
    I ASSUME the problem has something to do with the iPod Touch's drivers; for whatever reason they might be corrupted or installed incorrectly, thus preventing the iPod from automatically reinstalling them as well as preventing the possibility of syncing.
    My question is, how can I reinstall the drivers without having the iPod touch do it automatically?
    Any help would be much appreciated, thanks.

    I fixed the problem myself.
    If anyone else has this same problem and is looking to fix it, here is what I did.
    I found this on another site:
    "Okay well I spent about an hour on the phone with Apple trying to fix this problem. The guy I talked to seemed to have delt with this problem before. He tould me that Apple was getting numerous calls about the iPod touch not connecting with iTunes. So here is the solution that worked for me.
    The first thing you must do it uninstall iTunes and Quicktime using the controll pannel, add/remove hardware, on your windows computer. Once you have uninstalled both of thoes programes go ahead and look for anything else that is Apple and uninstall them as well. There should be an Apple updater or driver that is very critical to uninstall, this was the cause of iTunes not recognizing the new iPod Touch. Next make shure you have the very latest update for Windows on your computer, you can check this on Microsofts web page. Finnaly once you are shure you have UNINSTALLED EVERYTHING that says Apple, iTunes, or Quick time restart your computer and MAKE SHURE THAT YOUR IPOD IS NOT CONNECTED TO YOUR COMPUTER. Then download the newest version of iTunes and install it. Once the installation is complete go ahead and connect the iPod Touch and everything should work.
    I am not shure if this will work for everyone but in my situation it worked. I hope it helps some of you out there!!"
    That worked like a ******* charm. Hope this helps.

  • IPod touch not working with Sony clock radio.

    iPod 4th gen won't play music through new Sony clock radio.  It charges but won't play or control music.  Works with 2 iPhones tested but not touch.  Yes I am using the correct adapters, universal for iPod and the different ones for phones. 

    Does Sony say it will work with yur model iPod and iOS?
    Do the phones have the same iOS?
    Is the iPod fully seated in the dock?
    Does the iPod sync and charge OK?
    - Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic.
    Sometimes this works
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    Other uses have reported problems with Sony docks. Use the communities search feature in the upper right and search for Sony. Use the advance search to restrict search to the iPod touch forum

  • IPod Touch not working with Yamaha YDS-11, since version 3.1.1

    In July 2009, I purchased a Yamaha home theater receiver model HTR-6240 with an iPod Universal dock YDS-11. The iPod Touch worked fine on it until I upgraded the iPod firmware to 3.1.1. When connected, it charges the iPod but the music only comes out of the iPod internal speaker and static comes out of the stereo speakers when turned up. I use an FM transmitter in the car that uses the line out and charges the Touch, and that still works since the upgrade. The Yamaha dock works fine with my 4th gen nano, so I am wondering how the 3.1.1 Touch upgrade affected the line out. Has anyone else run into this situation?

    I'm having the same problem using I use my iPod Touch (Gen1) in a Denon ASD-11R Dock hooked up to my receiver. Prior to installing the upgrade, this setup worked very well and I was able to view all of the functions on my TV screen and fully control the IPod. Since the upgrade, when I try to view the IPod Touch through my system, it shows that it is "Loading" for about a minute and then reports "No Song". I tried rebooting and restoring the IPod a couple of times and this did not change the situation. I can still control the IPod through my remote (play, pause and skip songs), but cannot get it fully functional with my sound system like it was prior to the software upgrade.

  • IPod Touch not working with Sony Stereo, and its not the stereo

    I just bought a Sony Stereo with an iPod Dock, it originally played my iPod Touch the first day I had it, but now it doesn't. The stereo works with other iPods in the house so I know it isn't the stereo. Could there be something wrong with my iPod?

    You didn't mention which Sony with built-in iPod dock, so if I am to assume it's the same as mine, the CMT-BX20i, it still works fine for playing and charging. Does the IPT charge/sync with the USB cable still?
    Welcome to Apple Discussions!

  • Ipod touch not working with old ipod accessories..help?

    I just got an ipod touch for xmas. I realized that I had all these accessories that worked with my old 20g black and white ipod with the click wheel. I had an ihome, ihome to go, and a $40 portable charger. The ihomes will play the music when i plug it in, but they will not charge it, like they did previously. My $40 charger doesnt charge it. I am going away and I need the charger to work. Does anyone know how to make it work or have the same problem? Thanks...

    I just tried my iHome and it plays my music and it looks like its charging it. Also my third party docking station made by Tatil works also.
    Message was edited by: stefonhim

  • Ipod touch not working with logic3 speaker

    HI,
    My 4g 8gb IPod Touch running 5.1.1 wont work with my logic3 wis030 soundbar speaker dock (which says made for ipod touch) it sometimes says "Accesory not supported" and other times it wont dock unless i fiddle about with it, and then other times it docks perfectly fine and charges and plays music,
    im not sure if its the ipod or the speaker as the ipod is a couple of months old whereas the speaker is just under a year old,
    Thanks for any help,
    Quin

    It may be the speaker as i just rememberd that my last ipod did it just before i changed it on the insurance for this new one,
    Quin 

  • Does iPod Touch 2G work with Belkin's TuneSync (F5U255) ?

    Hello. I have a question about iPod Touch and its 3rd party docking accessory called Belkin's TuneSync.
    This product which was released a couple of years ago, provides 5 USB ports HUB and iPod docking station.
    OFFICIALLY, it supports up to iPod 5G, also known as video iPod, but a substantial number of people confirmed that it works fine with iPod classic, iPod nano, iPod touch 1G, and also the first iPhone.
    On the other hand, some people reported that it doesn't work well with iPod touch 2G and the latest iPhone, 3G.
    I was confused because I've seen some people's reports which show they are using this docking station with their iPod touch 2G.
    Although a guy claims that Apple has changes iPod's charging and syncing mechanism since 2008 September when iPod touch 2G and nano 4G were released so it can be hard to sync them with former generation of accessories, nothing is sure for me.
    Is anyone using this docking station with iPod touch 2G?
    Message was edited by: Netimoon

    I'm answering my own question.
    It partly works. Syncing and charging are perfect but audio line out doesn't work.
    I'm OK with that because I don't think I am gonna use that port but if you are one of them who want to attach a pair of external speakers for iPod touch 2nd gen, you should re-consider the purchase.

Maybe you are looking for

  • IPod touch 4g will not connect to lion

    Hi, I'm an iOS developer. I recently updated to 10.7.4, I was using Snow Leopard for development before updating. My problem is that when I plug my iPod touch to the Mac nothing happens at all. If i delete applemobiledevice.kext then the iPod will ch

  • I cannot get Icloud for windows update 4.0.2 to install on my Win 8.1 PC

    I cannot get Icloud for windows update 4.0.2 to install on my Win 8.1 Pro PC its an AMD 64 bit processor. I get a message that saysI cannot get Icloud for windows update 4.0.2 to install on my Win 8.1 Pro PC I get the update notification and authoriz

  • Flat file data sources info pack executing for long time with yellow

    I can see flat file all records 140 in above screen but i could not see data in PSA . when i am trying to see the PSA it show not data . I have tries to make status to green but still request not process to Data target .

  • Reason for Deadlock Insert Select on same table

    I have obtained the deadlock graph. However, I still don't understand why a deadlock occurs. Can someone explain it to me? Thanks in advance. deadlock-list deadlock victim=process3a59438  process-list   process id=process3a58c58 taskpriority=0 loguse

  • WAITFOR (RECEIVE message_body FROM WMIEventProviderNotificationQueue), TIMEOUT 5000

    I have WMI alerts configured for blocking and deadlocks. and i can see the above script is causing blocking. the WMI blocking SP is configured on msdb. when select staement for other user databases causing blocking with the TSQl  WAITFOR (RECEIVE mes