IPod Touch Doesn't Work with 64 Bit Windows Vista Ultimate?

So i blew out 500$ for something that will not work on my OS?
....How can i get it to work?

As stated in the System Requirements (link) 64bit versions of Vista are not supported. 
Personally I don't think this is clearly enough stated on the sales pages so you should have a good basis for getting a refund.
mrtotes

Similar Messages

  • Ipod touch doesn't work with latest itunes install

    Ok, I've been around the block too many times. Somebody, pleez help! I have a 3rd generation ipod touch. Couldn't connect to itunes (previous install for our nano and classic). Uninstalled it. Downloaded fresh, latest, 64bit installation. Tons of problems with Apple Application Support. Uninstalled, reinstalled, uninstalled EVERYTHING (Quicktime, Bonjour, updater, etc.) Used Windows uninstaller and registry cleaner. Reinstalled - iTunes works. Great. Now I connect my iTouch and it says it needs iTunes 64bit to run it. I installed 64bit. What now?

    Now I connect my iTouch and it says it needs iTunes 64bit to run it. I installed 64bit. What now?
    In iTunes, with the Touch connected, go "Help > Run diagnostics." Uncheck "Network Connectivity tests" and "DVD/CD tests" but leave the other boxes checked. Click "next" and then "next" again. Paste the contents of your diagnostics into a reply here so we can have a look.

  • Will ipod touch 4 gen work with windows vista service pack 1?

    Will ipod touch 4 gen work with vista service pack 1?

    All Apple says is:
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    Does it work/sync with SP1?
    Why not update to latest Vista?

  • Does ipod touch 4th generation work with Altec Lansing Octiv Mini Executive Edition?

    i want to buy a speaker and i wonder if my ipod touch 4th generation work with Altec Lansing Octiv Mini Executive Edition
    plz answer

    If anyone is interested I managed to solve this problem by reformatting the ipod as a mac ipod, with the help of friends system. This does get rid of the music but as I had it backed up wasn't a problem. I then plugged the mac Ipod back into a windows pc and reformatted it as a windows ipod which updated the firmware correctly and have'nt had a problem since.

  • My iPod Touch is not working with Bose SoundDock.  How can I fix it?

    My iPod Touch is not working with Bose DoundDock Series II.  Can anyone suggest how I can get these 2 to work together?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      
    Apple will exchange your iPod for a refurbished one with a new battery for $79 Y can do the exchange at an APple store or sent it in.. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following will replace your battery for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the battery yourself if you are up to it. Y can purchase a eplacement battery for about $10
    iPod Touch Repair – iFixit                  

  • New ipod touch won't work with itunes 10.6.3 says it needs 11.1 but I cannot load that on my macbook using OSX 10.5.8 any way around this?

    New ipod touch won't work with itunes 10.6.3, says it needs 11.1 or newer but I cannot load that onto my MacBook running on OSX 10.5.8 - is there anyway around this?

    No. If your MacBook has an Intel processor you can update to OSX 10.6.8 and then install the latest iTunes.
    A 5G iPod with iOS 7 requires that if you have a Mac you have OSX 10.6.8 or later.
    You can get 10.6.8 here:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • Will Boot Camp in leopard work with 64 bit Windows Vista Ultimate?

    I installed Boot Camp beta in Tiger. Then I installed the 64 bit version of windows Vista Ultimate. Many drivers were not installed such as the keyboard mapping driver. I bought Leopard. Should the version of Boot Camp in Leopard work with the 64 bit Windows Vista Ultimate or would I probably encounter the same driver problems? Should I delete the Windows partition before upgrading to Leopard and then install the 32 bit version of Windows Vista Ultimate for all the drivers to work properly?
    Please advise what to do.
    Thank you very much in advance.

    Hi,
    since the 'new' BootCamp 2.0 also only includes Driver support for the 32-bit Windows versions, you will get a 2nd Encounter.
    Is there a specific reason for you to use the 64-bit versions, apart from maybe the 4GB RAM 'issue' ?
    Installing the 32-bit version and then the Drivers from the OSX DVD should give you all the drivers needed.
    Regards
    Stefan

  • HT5925 My Ipod Touch does not sync with my Windows 8.1 Icloud calender.

    My Ipod touch does not sync with my Windows 8.1 I cloud calendar?  it syncs from windows computer to itouch but not vice versa

    Make sure you are entering the events on your iPod in the iCloud calendar and not something else such as On My iPod.  Check Settings>Mail,Contacts,Calendars>Default Calendar (in the Calendars section) to be sure you have selected an iCloud calendar as your default.

  • The home button on my 4th gen iPod touch doesn't work. If i'm luck and i'm pressing hard enough it goes to the home screen.  Any suggestions?

    The home button on my 4th gen iPod touch doesn't work. If i'm luck and i'm pressing hard enough it goes to the home screen.  Any suggestions?

    Try:
    fix for Home button
    Fix a broken, unresponsive or sticky iPhone Home Button
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ

  • My pc keeps saying usb device not recenized iv tryed so i cant restore my ipod touch 3g it works with iphone4 iv tryed diffrent wires and still the same

    my pc keeps saying usb device not recenized iv tryed so i cant restore my ipod touch 3g it works with iphone4 iv tryed diffrent wires and still the same plz help

    Hello again Graham,sorry I spelt your name wrong on my last post ... Ok I went to the device manager and found a yellow mark. I went to it and selected re install driver. I then re booted my pc. I now have no yellow marks in the list but my pc still wont recognise my iphone.
    Could I try anything else ?
    Cheers Chris

  • Re: Would serial number at the bottom work with other Windows Vista OS

    Firstly sorry for my English.
    I have only one question.
    My hard drive is broken with my recovery partition.
    If I download windows vista and install the system with my original serial number on the laptop, this will be working or I need to activate him after installation.
    I hope this is the same number than before is installed on my first installation.

    Hi Marcin
    I doubt that the serial number which is placed at the bottom of the unit would work with another Windows Vista OS. But its worth a try
    You could test it I heard that is very rare cases this was possible
    Anyway, if your HDD is broken and its not possible to create a recovery DVD using the software Toshiba Recovery disk creator then you should contact the ASP in your country for a help.
    If the warranty is valid the HDD should be replaced just for free. If you need only the Recovery DVD then you could order it here:
    https://backupmedia.toshiba.eu/landing.aspx
    Regards

  • Why is my ipod touch 5 not working with itunes? It says it needs to update to itunes 10.7 or later.

    My new ipod touch 5 is working perfectly, almost. When I plugged it in to my laptop for Itunes, the laptop said the ipod needs to update to itunes 10.7 or later. The problem is it won't let me update it. Can somebody help me?

    You need to be running Mac OS X 10.6.8 or newer to sync it. If you're using Mac OS X 10.6 through 10.6.7, run Software Update twice. If you're running Mac OS X 10.5.8 or earlier and have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
    If you're using Windows, what happens when you try to update it?
    (77078)

  • Ipod touch no longer working with isimple device?

    I have a 4th gen Ipod touch that was working just fine with my isimple device in my vehicle until I believe I updated the ipod to the latest firmware. I now recieve a message saying device is not compatible with Ipod, Is there anyway I can rollback to the previous version which I believe was 6.1.2? Thanks!!

    Downgrading the iOS is not supported by Apple.
    Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    Go to the devices support site and see if they have anything. Maybe a firmware update is available. Otherwise you will have to wait for a firmware or iOS update.

  • IPod Stuff doesn't work with my new iPhone

    I finally sprung for the iPhone three weeks ago and I love it. But I think I'm going to have to buy more new stuff. Neither set of my portable speakers that I use with my iPod (5th gen. video) work with the iPhone. When I put the iPhone in the dock, I get some message about Airplane Mode. Music does play through the speakers, but they won't charge the iPhone. When I put the iPhone on its own charger and tried to use the auxiliary input on the speakers, there was only silence.
    Do I need a special cable or something?
    Also, my car charger for the iPod doesn't work with the iPhone.
    Am I going to have to spring for another set of portable speakers? I've read that the Pure-Fi is compatible with iPhone.
    Thanks!

    Both my mini and my video iPod were USB -- not Firewire.
    Both your Mini and your iPod with video synced via USB and charged via USB when connected to your Mac, but they also support charging via Firewire and most of the older 3rd party devices charged iPods via Firewire - your iPods include firewire pins in the connector for charging via firewire.
    The first generation iPhone also syncs and charges via USB when connected to a computer, and the first generation iPhone also includes firewire pins for charging via firewire also, as your iPods include. The first generation iPhone does not support syncing via Firewire, but it does support charging via Firewire.
    Apple removed the firepins from the iPhone 3G connector as they have done with all new iPods released after a certain date and for all new iPods to be released in the future. 3rd party device manufacturers were made aware of this so all new 3rd party devices must support charging via USB only or include charging via USB in addition to charging via Firewire if a new device is to be backwards compatible with older iPods.

  • Can't burn cd's using iTunes 7.3 and 64-bit Windows Vista Ultimate

    Every time I try to burn a CD I get the following error:
    "Disc Burner or Software Not Found"
    I have checked Device Manager and no problems with the disc burner there. I've even burned cd's from Windows Media Player(and dvd movies with other programs), but I would prefer using iTunes 7.3 to burn cd's. From reading the discussions it is my understanding that iTunes cd burning functionality doesn't work with 64-bit versions of Windows XP and Windows Vista. Is there a fix for this? Please advise.

    Here's how to get Itunes to work in Vista and XP64 bit:
    Start Menu -> All Programs -> Accessories -> Right Click on Command Prompt -> Run As Administrator.
    Type “cd C:\Windows\SysWOW64″
    Type regsvr32 vbscript.dll
    If you don’t do Run as Administrator, the regsvr32 will fail. Also, be careful to run the command in SysWOW64, not System32! System32 on a 64-bit system actually contains the 64-bit system libraries.

Maybe you are looking for

  • OAS/Oracle 8.0.5(EE) on Redhat 6.0

    Has anyone out there been able to get this working? If so how? I have tried different configurations and none of them have worked. Oracle is running fine, but the OAS is not. The OAS will start and connect to oracle to add the necessary packages, but

  • XFCE session locked

    Hi all, this goes to a problem with XFCE as the new GNOME desktop did not suit my needs. XFCE was run fine until a recent update of GNOME packages but it may also be due to incorrect shutdown. Now there's a locked XFCE session (GDM in use) which I ca

  • Disaster Recovery Plan for BW Production db

    Hello Experts, We at IP are trying to evaluate and institute a sound and cost-effective disaster recovery plan for the BW production system. In this regard, we would like to hear from you(or from your infrastructure folks) about the experience(s) at

  • One axis of wave chart cannot change away from automatic formatting

    Refer attached vi and picture. I can change the other two y axis to floating point, but I cannot change the "acceleration x,y,z" from automatic formating to floating point; whenever I click floating point, the highlight returns back to automatic form

  • Ple help me asap how to use cose?

    hi frids i created view for  BSEG and BKPF  bec  in both tables i have common key comp_code is there. now i created datasource for this now i need to add another 3 fields. ECC field     table BKLAS     MBEW STPRS     MBEW STPRS     MBEW can i create