Ipod Touch Dosen't work anymore.
I have this iPod touch since September. Always work well and all. But yesterday, it stop working for no reason. 2 or 3 hours before, i was listening to it and it was working well. Later in the night, I wanted to see what time is it, and no matter what I was pressing or touching, it doesn't want to turn on. At the time, i was thinking by battery was empty because perhaps i let my music play. But today, i plug it into my computer and nothing happen.
Someone already got this problem or know about it? Is the battery already dead after seven month?
Thanks for Help.
Message was edited by: Skullburn
Hi Skullburn,
Try the tips in this article: http://support.apple.com/kb/HT1575#faq3
The iPod may need repair If the issue persists after trying the tips in the article. You can request repair online, make a reservation to have a Genius at a local Apple retail store take a look at it or call AppleCare.
https://selfsolve.apple.com/GetWarranty.do
http://www.apple.com/retail/geniusbar/
U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
-Jason
Similar Messages
-
My ipod touch in not working anymore how could I save it before doing a resature
my ipod touch in not working anymore how could I save it before doing a restaure
Restart, reset, restore are the basics from the manual. Try each of them.
-
Dear Friend,
My ipod touch stopped working since one week ago. The screen is totally withe with no reaction of the butttons.
I would like to know if somebody can help me to solve this?
thank you,For a blank iPod or "white screen of death"
iOS: Not responding or does not turn on
All the troubleshooting steps in the above are likely to lead you to restoring the iPod. Follow the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the iPod in iTunes and choose "restore from backup".
If you still can't get it to work, you have done all you can and only Apple will be able to help. -
My ipods touch screen doesnt work anymore i cant unlock my ipod
my ipod was working fine for a while and then now all of a sudden the touch screen doesnt work at all. Ive restored it twice now and i cant unlock my ipod because the screen doesnt work..anything i can do to fix it or do i have to buy a new one?
If you restored to factory defaults/new iPod and still have the problem you very likely have a hardwre problem and an appointment at the Genius Bar of an Apple store is in order.
-
Hi , my iPod is awsome,but the microphone doesnt work and i dont know what to do also before i did have probleme with my iPod but ive find a way on itunes to fix it !!! And when i talk on memo we can see that it wont get up more then 20 level !!!!
- Make sure the mic hole is unobstructed. It is the little hole on the back side of the iPod by the camera lens.
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My ipod touch 2g doesnt work anymore so what should i do
hi
Without more information such a the current status of the iPod all I can suggest is:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
TS2771 HELP! My ipods touch screen doesnt work anymore!
My ipod screen is not working! I updated to latest version. This started last few years (2011) and I thought it would stop, but it dosent work! Q.Q Help me pls
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My home button does not work at all anymore. Any suggestions on how to fix it?
Has the iPad been dropped?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
my ipod charger dosen't work. i have three of them in my house and i i put them in my laptop and it still dosen't work. what do i do? and is it because i have generation three?
Have you tried another cable?
Do the charges work on oner iDevices?
Does the computer recognize your iPod?
Have you tried resetting your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears. -
My iPod touch is not working in iTunes, but it is showing up on my "My Computer".
My iPod touch is not working in iTunes, but it is showing up on my "My Computer". The instructions from Apple Support is NOT effective. Please help.
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
ThanksIf you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automatically. Please help.
Thank You.See:
Can't connect to the iTunes Store -
TS1398 the wi-fi tool on my ipod touch is not working.
the wi-fi tool on my ipod touch is not working. i even can't turn it ON
See here: iOS: Wi-Fi or Bluetooth settings grayed out or dim
Note that if none of the suggestions resolve the issue, it's likely hardware related, meaning you'll need to have your iPod serviced or replaced.
B-rock -
the touch screen on my ipod touch is not working. meaning that i can not unlock my ipod or even turn it off. is there anything i could to to get the screen to work again?
Try # 2 and 3 in link below. If neither work, your screen digitizer might need to be replaced.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
My iPod Touch is not working with Bose SoundDock. How can I fix it?
My iPod Touch is not working with Bose DoundDock Series II. Can anyone suggest how I can get these 2 to work together?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one with a new battery for $79 Y can do the exchange at an APple store or sent it in.. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace your battery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. Y can purchase a eplacement battery for about $10
iPod Touch Repair – iFixit
Maybe you are looking for
-
Unable to Load data in Planning
Hi, I am receiving this error when ever i am trying to load data. Launch error message: "An error occurred while running the specified calc script. Check the log for details." and some times "You will be unable to update data when essbase in archive
-
Value in a EIT segment(From Update Page)not getting passed to the Next Page
Hi We have a extended CO to populate an EIT field as per the calculation in CO, on a custom button click. Calculated value is stored/displayed in the EIT Update Page. On clicking Apply, value is not getting passed to the next page, EIT Main Page and
-
Mail freezes and shows empty mailbox a while after installing ML
Hi there. I'm having massive issues with Mail since I upgraded my Macbook Pro from Snow Leopard to Mountain Lion (and updated it to 10.8.1). I've been searching through the support, the web for hours but nothing matches my issues specifically. Sorry
-
ABAP "WRITE" Statements for Debugging
Just curious to know if one can use ABAP write statements in Update Rules for debugging and auditing, and where the results are actually written to, and if they're accessible via the AWB. Thank you.
-
Is it possible to install OS X 10.6 Snow Leopard on an external HDD so I can boot from it? I would like to reinstall my old programms and files on the external drive so I can access them and work on them as they are an ongoing project.