Ipod Touch drops off network all the time

I am using a 2nd generation Ipod Touch to control Itunes on a Mac Mini. I am using the "Remote" application on my Ipod. I do not use the Ipod for anything else but remote control. There is no music on my Ipod.
I have the "stay connected" switched ON under remote settings in my Ipod. But almost every time I pick the Ipod up to use it it says:
"Can not connect to the local Network"
Then it generally does connect in a few seconds after I push a button. But sometimes I have to reboot the Mac Mini to get it to work. (I am not sure why this helps becasue I am using my Netgear Modem/router for my Network - not the Mac Mini....). My music library is on the Mac Mini.
Any ideas?
Thanks!

- Connect the iPod to your computer. If iTunes sees the iPod then restore the iPOd.
- Next see if recovery mode will allow iTunes to see the iPod so your can restore it.  For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Then try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Then, let the battery fully drain and then charge and try again.
- Last, make an appointment at the Genius Bar of an Apple store.

Similar Messages

  • IPod Touch 4th keeps reseting all the time!!

    Hey everybody! I really hope that you guys can help me..
    I was trying to exclude an app and then I decided to reset my ipod touch 4th. Now, it keeps reseting all the time by itself! The ipod don't turn off or even less turn on.. What can I do??

    - Connect the iPod to your computer. If iTunes sees the iPod then restore the iPOd.
    - Next see if recovery mode will allow iTunes to see the iPod so your can restore it.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Then try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Then, let the battery fully drain and then charge and try again.
    - Last, make an appointment at the Genius Bar of an Apple store.

  • IPod touch is fully charged all the time

    Hi!
    I have a Sony FM/AM Clock Radio (Model ICF-CS10iP) that plays iPod/iPhone, and when I connect the iPod to the radio in order to play it, the battery is recharged very fast, so that my iPod is always fully recharged. In other words, I don't have time to spend my time listening to it with the earphones, consuming the battery till it runs out, then I would have to recharge again. It simply is full all the time. Is there any problem in not having this cicle of consuming and recharging? Thanks!

    Yes. For maximum battery life, Apple recommends fully discharging/charging the iPod at least once a month.
    http://www.apple.com/batteries/ipods.html

  • IPod Mini continually skips tracks all the time every half a second!

    My iPod Mini continually skips tracks all the time every half a second. The only thing that stops it is if you press pause but once you press play off it goes again. This means noi music is able to be played because it's always skipping. The menu button works as does the backlight if you hold the menu button down. The enter button works and the touch pad navigation also works. Both skip buttons have no effect on the unstoppable skipping. Can anybody help or at least verify the problem with other users of simular problems and if they were able to fix them simply, without having to go to an Apple dealer (it's out of warrenty i think)Any help would be appreciated.

    My iPod Mini continually skips tracks all the time
    every half a second. The only thing that stops it is
    if you press pause but once you press play off it
    goes again. This means noi music is able to be played
    because it's always skipping. The menu button works
    as does the backlight if you hold the menu button
    down. The enter button works and the touch pad
    navigation also works. Both skip buttons have no
    effect on the unstoppable skipping. Can anybody help
    or at least verify the problem with other users of
    simular problems and if they were able to fix them
    simply, without having to go to an Apple dealer (it's
    out of warrenty i think)Any help would be appreciated.
    ---thats what happened to mine, then it stopped working altogether. liek not playing songs at ALL. i have tryed reformating it, i finally got all the settings erased, but then it woulndt 'talk' to iTunes. it has been about 2 months and im still working on it. my suggestion is send it in beore it gets as bad as mine.
    good luck!
    -adair
    no idea 1123   Windows XP   haha
      Windows XP  

  • TS1369 After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

    I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
    Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch.

  • I am not able to download any new music to my ipod touch. It has all the updates.

    I am not able to download any new music to my ipod touch.  It has all the new updates.  When I connect my ipod to the computer, the new music does not download. I need some help please!

    Is your music from Itunes? If it's not that's probably why

  • Can I leave my ipod plugged in and on all the time?

    can I leave my ipod plugged in and on all the time?

    That will degrade the battery. Apple recommends that you fully discharge and fully charge monthly.
    Apple - Batteries - iPod

  • My Macbook drive was replaced. If I sync my IPod Touch I'll lose all the old data on my IPod. Can I restore my iPod data to my computer?

    My Macbook drive was replaced. If I sync my IPod Touch I'll lose all the old data on my IPod. What do you do when you buy a new computer or have a new hard drive?  Can I restore my iPod data to my computer?

    See this article for details: How to back up your data and set up as a new device
    Or do this:
    Make sure your Mac is authorized in iTunes. Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
    This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
    Transfer your purchases the same way to copy all apps and bought media from the Store to your MacBook.
    Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
    The rest of the data can be restored from the backup you made.
    Restoring: http://support.apple.com/kb/HT1414
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

  • I have upgraded the new ios for iPod Touch but i lost all the apps i bought! How can I take my apps back?

    I have upgraded the new ios for iPod Touch but i lost all the apps i bought! How can I take my apps back?

    just click buy it will say u have already purchased the app u can downloasd it again for free

  • HT1461 Win 7 set up and running OK,but after go back from OSX the wireless net work stuck at identification cause the window working without Internet.Can we fix it or I must use Windows off line all the time? I already contact Microsoft 2 times for activa

    Win 7 set up and running OK,but after go back from OSX the wireless net work stuck at identification cause the window working without Internet.Can we fix it or I must use Windows off line all the time?
    I already contact Microsoft 2 times for activations.Hope I can fix from Apple instead.

    Ok....Got "Problem 2 and 4" solved....still trying to figure out this pop up everytime I click something...it's crazy how fast the pop up blinks...maybe once or 3 blinks then nothing till you close the window, then pop up then disappears...then click something
    else and pop up then gone....never seen this before...ive seen it when you tried to get online which turned out to be a virus on a customers cpu I worked on some years ago, I think it has something to do with the deleted files that I spoke of on last
    post...I notice it does it on start up as well.....think something is trying to install but not sure. Need to figure out where the appdata or start up folder and see whats in there....maybe it's in there.......so I might wait to see how it acts in the next
    couple days for "Problem 1"...but other than that it's running like a champ...so right now I just want to get the pop up windows to stop........thx again for everyone's help on this.
    John

  • Airport losing my Network all the time

    Good morning,
    I have set my network several months ago, it was working perfectly fine in the beginning. Now, this is what is happening all the time: after about half an hour being online, it seems like I am not hooked to the internet anymore. The Airport light is green, the signal level is at the highest, the status says "connected", but if I try to access a page, the bar is blank. No other networks show but if I manually type another network that I know of and that is not password protected, it connects to it, and then I can access my page with no problem.
    This is not my network, I don't see why I should use a neighbor's network when mine is just set in the same room as my desktop, and above all why I can't catch it with the Airport that seems to say everything is there.
    If I want to go back then to my own network, it has disappeared from the list, and then it says it can join back. It takes sometimes half hours before I can join back as if nothing had happened, and then some time later it does it again.
    Any idea why it would do that? is my airport box defective?

    Thank you for your help, Tesserax, I really appreciate it because I admit I am very annoyed (it is getting worse today, or I am less patient because of my own moods, but it seems to disrupt me from working so much).
    I have many other networks, but mine is always with the strongest signal. Sometimes it drops to 50% (the highest is around 85%) and the noise increases (the highest has been 40%), and I see no of the described reasons why. All the other networks that appear are all around signal 44% and below
    The only electric cable is the computer cable and the cable from the computer to the printer, could it be that making the interference? there is no way I can hook these somewhere else! The airport is hooked to the modem box and that's where the cable is hooked to my home, so I also do not see how I can avoid having those together. Maybe there is something I haven't understood there.
    Also I have not understood how I can change anything in the airport. All those numbers seem to be automatically generated, and I don't see where you have a menu that gives you control to how it is set, if I have to reset something, whether it is in the System's preferences (network) or in the Internet Connect, I don't see any setting menu.

  • 40gb Ipod says "do not disconnect" all the time... please help!

    My 40gb ipod just says do not disconnect all the time when it is connected to my pc. itunes says the update is complete and my computer is recognising the ipod.
    please help!!!

    I'm having the EXACT same problem... it all started after I did the iPod software updater...
    HELP!!
    BTW - my iPod is the 20GB
    iPod is running fine (otherwise), but will not update, even though iTunes says update is complete. iPod screen continuously flashes Big Red Do Not Disconnect screen.
    Oy.

  • Can iPod Shuffle repeat one song all the time?

    Hi,
    Just like the title, is iPod Shuffle able to repeat one song all the time?
    Thanks,

    If is the only song on the shuffle, yes. Otherwise, I believe not.
    (Personal Experience - First Generation iPod Shuffle

  • LG Cosmos Touch VN270 turns on all the time and kills battery life - how to stop this??

    I lock the phone using the lock button on the side but then I'll notice that the display will come on spontaneously (an hour later or ten minutes later...it varies). I notice there is some symbol flashing (arrows and tiny cell phone icon at top of display)  and when I unlock it I will see a screen for browsing and downloading. This is super annoying because I have to keep recharging the phone even though I barely use it. And I can't find a setting to shut whatever it is off that keeps making it do that.
    It's true that the display dims a minute later but if this is happening all day then it wastes the battery. I can tell because I'm recharging the thing every other day, which I'd really rather not have to do. 
    Solutions??

    Just to add another voice ... I've had the same issue.
    Due to my terms of employment I keep the phone on overnight. Between midnight and 6:00am the backlight comes on and stays on, even though the timer is set to 30 seconds. Once, and only once, I left the volume turned up, instead of vibrate-only, and received detailed instructions on how to set up the email feature. That was not a friendly way to wake up. If I see the back light on, or the Download screen, I can shut it off with the screen lock button. Sometimes it comes back on later. This definitely kills the battery by morning.
    I have worked with various Customer Support people who knew nothing about this issue. They have walked me through the remove battery, reset and reactivate phone, etc. to no success. VZW was kind enough to replace the phone with the same model. The second phone has the same issue.
    The local Verizon store would only tell me to please contact the Customer Service number. The corporate account rep at work has been a black hole, so far.

  • Touch screan not responing all the time

    Touch screen some times doesnot respone .

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Maybe you are looking for

  • Itunes 10 installs but says unknown publisher invalid digital signature

    i need help as i would like to upgrade to itunes 10. I have tried absolutely everything such as restarting computer and resetting tools on internet. it installs perfectly but once it has finished it comes up with an error message saying unknown publi

  • Mapping between  a nodes 0..2 and a node 0..1

    Hi, i need to do a mapping between MT_PRICE PRICE (element 0..2)   CURRENCY (attribute)    AMOUNT      (attribute) T YPE           (attribute) for example MT_PRICE <PRICE CURRENCY="EUR" TYPE="NET">35.50 </PRICE> <PRICE CURRENCY="EUR" TYPE="NET" AMOUN

  • 11g client create trigger

    Hi I am trying to create a trigger using the 11g client i go into the schema on the database tree in the window on the left and find the table i want and right click triggers i click create and name my trigger and write the code in the trigger body i

  • SAP Portal J2EE logon groups

    Please can you help. Within ABAP you can go into SMLG and configure logon groups so you can separate user groups to particular application instances. I would like to do the same within NW Portal and CE.  We have external and internal users accessing

  • Getting DPI of a JPEG with JAI

    I need to get width / height in cm or inches and the DPI of a JPEG using JAI. I'm currently getting the width and height in pixels using getWidth() and getHeight() of a RenderOp, but it apparently hasn't similar methods to get the DPI (which will suf