IPod Touch frozen - touching screen does nothing- nothing moves when I touch anything - help...
non-responsive touch screen on iTouch 2G, even after restore. originally froze while playing music. After restore, now non-responsive in the locked screen.
See Here for
iOS: Not responding or does not turn on
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Similar Messages
-
New apple user, just got new iPod touch gen 5 and there is no App Store on it. Restored it twice and this does nothing. What do I do, help please :(
Has it been disabled via Settings -> General -> Restrictions?
I assume you have checked other pages of apps by swiping to the left from the home screen?
B-rock -
When I plug my ipod into my mac it does nothing. any ideas?
when I plug my ipod into my mac it does nothing. any ideas?
Try a different USB port on your computer. If your using a PC, the port on a keyboard is not strong enough; plug it into a USB port on the computer tower.
Be sure to wait awhile; mine sometimes takes a couple minutes to connect.
Another tip would be to open i-tunes before plugging ipod in.
If it still doesn't work, try resetting your ipod by turning the hold button on and off, then pressing and holding the center and menu buttons until the Apple logo shows up. When ipod returns to main screen, plug it into the computer again.
If nothing works, you may have a bad connection cord. -
PRE 9--clicking on buttons in New Project screen does nothing
This is strange. PRE 9 had been working fine. Now, when I launch the program and the New Project window comes up asking me to type in a name, indicate where it is being saved to and to change whatever settings I must, I cannot do any of these. I cannot type in a name and clicking on the buttons does nothing. When I hover the cursor over the buttons, the color shade changes as if everything is active but nothing happens when I click on the button.
I uninstalled and reinstalled four times.
Has anyone seen this before?
Thank you very much.
Alan SilberlightMore information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679 -
I am using IOS 4.1 in Ipod touch. I would like to take my data back using icloud. I am not able to enable icloud in to my ipod touch. please help me for the same. Basically I am trying to take back to upgrade my ios to 5 or 6 version.
You can't back up to iCloud until you update to iOS 5 or higher. You will have to back up your iPod on your computer using iTunes. Update iTunes on your computer to the latest version, then connect your iPod to your computer, open iTunes, if iTunes give you a pop-up asking if you want to update your iPod, decline. Then click on the name of your iPod in iTunes, go to File>Devices>Transfer Purchases to transfer any purchased media to your iTunes library. Next, go to the Summary tab of your iTunes sync settings and click on Back Up Now to back up your iPod on your computer.
When it's done backing up, click on Check for Update (or Update) on the Summary tab of your iTunes sync settings. Allow your iPod to update, and leave it connected to your computer. At the end, it will restart and give you the option to restore to the iTunes backup you made earlier. Choose this option to restore your backup and sync your apps and other iTuens media to your phone.
This process is outlined in this article: http://support.apple.com/kb/HT4972, under "If you are attempting to update using a Mac or PC with which you normally sync". -
My old laptop crashed and I need to restore my iTunes music and movies to my new laptop from my iPod Touch. Help please. Thanks!
See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
I am battling to get my Album Artwork updated in my Ipod Touch - please help?
Just a guess here, but it sounds like iTunes is under the impression that some of the song files it is managing are located on a removable drive. Do all of your songs play from iTunes? That might be hard to know if you have thousands of songs, but if a song was imported into iTunes, but the file was deleted afterward (like if you used removable media), you might get a warning like that, and the song wouldn't play in iTunes. Just a thought.
-
My ipod has a black screen with only the resisitive button on show. HELP
i dropped my ipod touch and the restart button doesnt work, so i got the resisitve touch and now my ipod has a black screen with only the resisitive button on show. HELP ME PLEASEE
PLEASE HELP OR IM GOING TO END UP THROWING IT AWAY
Message was edited by: Sadiiaa_Try:
- iOS: Not responding or does not turn on
Where it says place the iPod in recovery mode use this program.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
When i plug my ipod into my computer, What does error -3150 mean when i plug my ipod into my computer
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
-
I received a message on my iPad re update to iO7 and I said yes, install. Now it's stuck on the agree/disagree page; nothing moves when I press Agree and Send by Email. Can anyone help?
Reset iPad and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Why does RoboHelp 8 crash when compiling merged HTML help after deleting a child project in TOC
Why does RoboHelp 8 crash when compiling merged HTML help after deleting a child project in TOC? I would be grateful for any assistance.
Here's the situation:
-- I recently upgraded from RoboHelp X5 to RoboHelp 8. I upgraded my projects to RoboHelp 8 projects.
-- One large help system I manage is built such that there is one master project and about 25 child projects. Each of these is its own item in the master project TOC.
-- In RoboHelp X5 I never had any trouble deleting these.
-- However now in RoboHelp 8, whenever I delete one (by opening TOC pod, right-clicking on item in question, and clicking Delete), and proceed to "Generate Primary Layout" (MS HTML Help), the generation/compilation process proceeds as far as "Generating full-text search data" and then the whole program crashes!
Am I doing something wrong? Is there a bug in the software? I have installed patches 8.0.1 and 8.0.2.
Once again, I thank you in advance for any pointers.
Matthew Keranen
Jamsa, FinlandThat does help - thanks a lot.
Wayne Kroger
State Street Corporation
SQA-Princeton
(609) 580-6264
mail to: [email protected]
The information contained in this email and any attachments have been classified as limited access and/or privileged State Street information/communication and is intended solely for the use of the named addressee(s). If you are not an intended recipient or a person responsible for delivery to an intended recipient, please notify the author and destroy this email. Any unauthorized copying, disclosure, retention or distribution of the material in this email is strictly forbidden. -
I basically restored my iPod to start my music collection from scratch because I got a new PC.
I plugged the 32gb iPod touch into my PC and the USB connection sound went on to indicate that it is connected to the PC but the 'Connect To iTunes' graphic is on, even when it is connected to the PC and iTunes is open it doesn't show any devices connected. After a while the iPod shuts itself off, and when I turn it on again the same thing happens. Graphic. Not found in iTunes. Turns off. I think but I can't remember if I updated the iPod's operating system prior to the restore (this all happened 2 weeks ago).
I'm not sure of the model/generation of the iPod. I got it brand new for Christmas of 2009 in Australia.
Any help would be appreciated!Try here:
iOS: Device not recognized in iTunes for Windows
Also include manually placing the iPod in Recovery mode and then try a restore
Then try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Further, try another computer to help determine if yu have a compter or iPod problem. -
Itunes (Mac) won't recognize ipod touch - please help!!
Hi. I have a brand new 4th-gen ipod Touch. I'm running Snow Leopard and iTunes 10.4.1 on a Macbook. I have three other ipods (classic, shuffle x 2) and they all work fine. THe USB cable and port work fine with other ipods (and with this one on the rare occasions it works properly) and the ipod touch, when it's cooperating, seems to function OK so I don't think it's a hardware failure. It hasn't been dropped/wet, and I've only used it for 4 days.
Bit of a saga and I'm getting seriously fed up!
The ipod touch synced OK the first time I went to set it up, I installed some music/apps and all seemed fine. Then the next time itunes wouldn't recognize it so I couldn't sync (it just charges through the USB but does nothing else). So I ran through all the suggested tests on Apple support (turning on/off, checking I had the right versions of stuff, etc), that didn't help so I uninstalled and reinstalled itunes 10. That worked, and the ipod touch synced and I was able to use it again. BUT, the day after that, it went back to not being recognized. Tried everything again, reinstalled itunes - that worked. Then the next day... not recognized again!
So I phoned Apple support, and the guy told me to hard reset and restore factory settings, which I did but it failed: first time it didn't restore (was just same as before). Second time I tried it froze and I got Error #1611. Tried again and got Error #1618 which isn't even listed on the Apple Support page the error message links to (by this stage it was showing the plug into itunes screen you get when you first turn it on, but only when plugged into a USB port - wouldn't turn on when not connected). So I called Apple Support again (different person this time) and was told it was a possible hardware failure and I should take it to my local Apple Reseller.
Apple Reseller staff looked at it, confirmed that it'd only turn on when connected to computer, so they plugged it into one of theirs and restored the factory settings. THis time successful (ipod working again) but went to sync to itunes and AGAIN it wouldn't recognized it. Went through the whole uninstall/reinstall process for itunes and got the ipod to sync. But now.... not recognized again!! I can't keep uninstalling and reinstalling itunes every time I want to sync the ipod, that's just ridiculous.
Has anyone else had this problem? And does anyone know how to fix it?I think I might have fixed it (touch wood, cross fingers, etc)...
Here's what I did:
In Finder, under "Go", select "Go to folder".
When the box comes up, enter this folder name: /system/library/launchdaemons
Click "go"
Locate this file: com.apple.usbmuxd.plist~orig
Put it in the trash
(NB: there's also a file called "com.apple.usbmuxd.plist" in that folder - don't touch that one)
Restart computer
Open itunes, connect ipod
If the ipod appears in itunes, restart and try again to confirm it's working.
This came from instructions someone else posted on another Apple discussion about an ipod touch not syncing. That reply said to do the software updates from the Apple menu first, but I did that and they failed to install but the above still worked, so the updates might not be necessary. -
i need advise on what to do now as nothing is working its a new laptop and the ipod has not been on this laptop but i have itunes for the ipod on the computer can someone help please thanks
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Various problems with my ipod touch please help
Hi,
I need help yesterday when i plugged my ipod in to update my podcasts like i do every morning I kept getting an error message that i can't remember and then when it was finished syncing there was no content on it. then i started getting the error message that my account had been disabled due to security purposes??? anyway i went to work (without my ipod...tourture!) and when i got back i tried to sync it again only this time my ipod was giving me the message that it couldn't be synced because there was not enough space but i my ipod is a 32 gb and when i clicked on the ipod screen the bar at the bottom had my usual adudio and video content (the space that it uses) but then the rest of the bar was yello (other content?) and I don't know what it is and its taking all the space up on the ipod. so i tried restoring it but the same thing would keep happening. so i uninstalled itunes piece by piece (to my dismay i lost everything in my library and it won't open now. I went to teh apple website to try and download the itunes but it kept telling "now that you've downloaded itunes lets get started" but nothing had actually downloaded! i finally got the 32 bit version to install but now when i try to open itunes it won't and gives me the error message that "itunes can't be opened because it was created by a new version". i have lost everything and now i can't even use my ipod. i paid 3 or 4 hundred dollars for this about two years ago not to mention all the content i have already purchased and its all lost and I don't have any warranty. Can anyone help????- Try completely removing and reinstalling all the Apple software using these instructions:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
- The try restoring the iPod via iTunes. First try restoring from backup. If still problem then restore to factoery defaults/new iPod
- If you can't restore, try placing the iPod in recovery mode and then restoring. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
Since my Itunes was updated I have had nothing but problems. When I open Itunes, the majority of the time I can not access the itunes store, though I can occasionally. I have good internet connection. I followed Itunes help associated with that and even downloaded the latest version of my graphics card. Then if I close out of Itunes and go back to reopen it will not reopen at all. The only way I can reopen it is by restarting my computer. The other thing is that I have a brand new Ipod touch and Itunes does not recognize it. Help!!! I hate Itunes 11.0!! If I didn't already have 7 Ipods and a song library of 6000, I would walk away from apple right now!!!
Okay for my issue I ended up calling Apple Support and getting a solution! Yahoo! It appears to be working properly without having to go back to the old version of Itunes, as was suggested by someone in this forum. I have Windows 7, and they did suggest to makes sure my Windows 7 was updated, along with my Video Card. The tech had me uninstall Itunes and Reinstall it, however she stressed to me that if it was not uninstalled in the proper order, Itunes still would not work after the re-install.
The proper order to uninstall Itunes from the add or remove programs, is:
1st Itunes
2nd Quicktime
3rd Apple Software Update
4th Apple Mobile Device
5th Bonjour
6th Apple Aplication Support
Following the uninstall I shut the computer off completely for one minute, then powered it back up, and went to www.itunes.com to reinstall the software. Seems to be working now, with my Windows 7, without having to revert back to the old version of itunes.
Maybe you are looking for
-
Hello i want to ask about something but i don't know how to do that, i mean how to configure SIP profiles by SMS ( like the network provider when he sends sms with the internet configuration ) if that possipole please attach the steps , thank you so
-
Display Drill Dimension List Dynamically
Hello All, Is it possible to change dimension member list based on selection of a higher-level dimension in Web Intelligence document while it is in u201CDrillu201D mode? It is very similar to cascading prompts behavior, but implemented for drillable
-
Hi, is there any activity in CSM 4.2 configuration, if I decide to modify the server IP ? thanks in advance rs
-
How can I transfer videos in photo stream
How can I transfer videos in photo stream
-
CS 3 design premium to CS 4 web standard
I am currently using Creative Suite 3 Design Premium on two Macs, one with OS 10.4.11, the other OS 10.5.x. I'm interested in getting the new version of Dreamweaver and Flash and considering using the Adobe upgrade path to CS 4 Web Standard. Will ins