IPod Touch frozzen after few seconds of activity
Hi Everyone,
While my WiFi connection is active (attached or not on any WiFi spot) after few seconds of activity my touch screen don't regognized my finger's movements, only the menu button is working. I must wait the screen saver for using my iPod. I have restored the software three times since I bought it last week but nothing change. If I turn off my WiFi connection it's working better.
Have you discover the same problem ? Is the processor too slowly or the WiFi card ?
Thank you for your help !
I,ve used mine for 3 days (with periods of instant freezes)and now it's is totally frozen. Touch screen just won't work. I've notice some association with the wi fi use and the instant frozen state. But now I cant do anything with the Ipod.
I'll keep looking for answers and fixes
Anything you find, please let know and I'll do the same for you.
[email protected]
Similar Messages
-
I am using apple iPod-suffle model,I am unable to upload music into iPod and 3 lights(green,orange and red) keeps blinking for few seconds when I connect my iPod to my PC and after few seconds its turn to unresponce mode,Plz help to find out solution.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Sorry for my bad english. My ipod have a white screen and after few secondes somes lines appear.
- Try a reet:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next connect to computer and if it shows in iTunes restore the iPod.
- If the screen is still white, let the battery fully drain and charge for an hour.
- If still white screen it is time for an appointment at the Genius Bar of an Apple store.
- If not, the try the reset and connect to iTunes and restore. Also try placing the iPod in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
Dispatcher stop after few second
Dear friend, I have restore database using BRRESTORE. My dispatcher is stopped after few second. Developer trace is as below.:
Pls. give me solution as soon as possible.. Thanks. in advance.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jun 13 08:38:11 2011
kernel runs with dp version 136(ext=102) (@(#) DPLIB-INT-VERSION-136)
length of sys_adm_ext is 312 bytes
sysno 00
sid PRD
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 218
intno 20020600
make: multithreaded, ASCII
pid 6128
***LOG Q00=> DpSapEnvInit, DPStart (00 6128) [dpxxdisp.c 1104]
shared lib "dw_xml.dll" version 218 successfully loaded
shared lib "dw_xtc.dll" version 218 successfully loaded
shared lib "dw_stl.dll" version 218 successfully loaded
shared lib "dw_gui.dll" version 218 successfully loaded
shared lib "dw_mdm.dll" version 218 successfully loaded
Mon Jun 13 08:38:23 2011
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0234.qqq.nxst) took 12 seconds
Mon Jun 13 08:38:40 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3881]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >abcbl_PRD_00 <
DpShMCreate: sizeof(wp_adm) 16640 (832)
DpShMCreate: sizeof(tm_adm) 2379840 (11840)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (364)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 051B0040, size: 2675472)
DpShMCreate: allocated sys_adm at 051B0040
DpShMCreate: allocated wp_adm at 051B17D8
DpShMCreate: allocated tm_adm_list at 051B58D8
DpShMCreate: allocated tm_adm at 051B5900
DpShMCreate: allocated wp_ca_adm at 053FA940
DpShMCreate: allocated appc_ca_adm at 053FEF90
DpShMCreate: allocated comm_adm_list at 05400700
DpShMCreate: allocated comm_adm at 05400718
DpShMCreate: allocated vmc_adm_list at 0542F518
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0542F540
DpShMCreate: allocated wall_adm at 0542F548
MBUF state OFF
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2457 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( abcbl) [dpxxdisp.c 10127]
DpStartStopMsg: send start message (myname is >abcbl_PRD_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 218
Release check o.K.
Mon Jun 13 08:39:20 2011
ERROR => W0 (pid 6032) died [dpxxdisp.c 12698]
ERROR => W1 (pid 6132) died [dpxxdisp.c 12698]
ERROR => W2 (pid 564) died [dpxxdisp.c 12698]
ERROR => W3 (pid 196) died [dpxxdisp.c 12698]
ERROR => W4 (pid 4512) died [dpxxdisp.c 12698]
ERROR => W5 (pid 4600) died [dpxxdisp.c 12698]
ERROR => W6 (pid 6064) died [dpxxdisp.c 12698]
ERROR => W7 (pid 4552) died [dpxxdisp.c 12698]
ERROR => W8 (pid 4520) died [dpxxdisp.c 12698]
ERROR => W9 (pid 6060) died [dpxxdisp.c 12698]
ERROR => W10 (pid 4528) died [dpxxdisp.c 12698]
ERROR => W11 (pid 4376) died [dpxxdisp.c 12698]
ERROR => W12 (pid 4560) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W13 (pid 4484) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W14 (pid 4488) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W15 (pid 1700) died [dpxxdisp.c 12698]
ERROR => W16 (pid 4380) died [dpxxdisp.c 12698]
ERROR => W17 (pid 4464) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W18 (pid 5932) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W19 (pid 4620) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-6032 (SIGUSR2)
ERROR => DpWpKill(6032, SIGUSR2) failed [dpxxtool.c 2508]
killing W1-6132 (SIGUSR2)
ERROR => DpWpKill(6132, SIGUSR2) failed [dpxxtool.c 2508]
killing W2-564 (SIGUSR2)
ERROR => DpWpKill(564, SIGUSR2) failed [dpxxtool.c 2508]
killing W3-196 (SIGUSR2)
ERROR => DpWpKill(196, SIGUSR2) failed [dpxxtool.c 2508]
killing W4-4512 (SIGUSR2)
ERROR => DpWpKill(4512, SIGUSR2) failed [dpxxtool.c 2508]
killing W5-4600 (SIGUSR2)
ERROR => DpWpKill(4600, SIGUSR2) failed [dpxxtool.c 2508]
killing W6-6064 (SIGUSR2)
ERROR => DpWpKill(6064, SIGUSR2) failed [dpxxtool.c 2508]
killing W7-4552 (SIGUSR2)
ERROR => DpWpKill(4552, SIGUSR2) failed [dpxxtool.c 2508]
killing W8-4520 (SIGUSR2)
ERROR => DpWpKill(4520, SIGUSR2) failed [dpxxtool.c 2508]
killing W9-6060 (SIGUSR2)
ERROR => DpWpKill(6060, SIGUSR2) failed [dpxxtool.c 2508]
killing W10-4528 (SIGUSR2)
ERROR => DpWpKill(4528, SIGUSR2) failed [dpxxtool.c 2508]
killing W11-4376 (SIGUSR2)
ERROR => DpWpKill(4376, SIGUSR2) failed [dpxxtool.c 2508]
killing W12-4560 (SIGUSR2)
ERROR => DpWpKill(4560, SIGUSR2) failed [dpxxtool.c 2508]
killing W13-4484 (SIGUSR2)
ERROR => DpWpKill(4484, SIGUSR2) failed [dpxxtool.c 2508]
killing W14-4488 (SIGUSR2)
ERROR => DpWpKill(4488, SIGUSR2) failed [dpxxtool.c 2508]
killing W15-1700 (SIGUSR2)
ERROR => DpWpKill(1700, SIGUSR2) failed [dpxxtool.c 2508]
killing W16-4380 (SIGUSR2)
ERROR => DpWpKill(4380, SIGUSR2) failed [dpxxtool.c 2508]
killing W17-4464 (SIGUSR2)
ERROR => DpWpKill(4464, SIGUSR2) failed [dpxxtool.c 2508]
killing W18-5932 (SIGUSR2)
ERROR => DpWpKill(5932, SIGUSR2) failed [dpxxtool.c 2508]
killing W19-4620 (SIGUSR2)
ERROR => DpWpKill(4620, SIGUSR2) failed [dpxxtool.c 2508]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 13 08:39:30 2011
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jun 13 12:39:30 2011
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 6032 Ended no 1 0 0
1 DIA 6132 Ended no 1 0 0
2 DIA 564 Ended no 1 0 0
3 DIA 196 Ended no 1 0 0
4 DIA 4512 Ended no 1 0 0
5 DIA 4600 Ended no 1 0 0
6 DIA 6064 Ended no 1 0 0
7 DIA 4552 Ended no 1 0 0
8 DIA 4520 Ended no 1 0 0
9 DIA 6060 Ended no 1 0 0
10 DIA 4528 Ended no 1 0 0
11 DIA 4376 Ended no 1 0 0
12 DIA 4560 Ended no 1 0 0
13 UPD 4484 Ended no 1 0 0
14 ENQ 4488 Ended no 1 0 0
15 BTC 1700 Ended no 1 0 0
16 BTC 4380 Ended no 1 0 0
17 BTC 4464 Ended no 1 0 0
18 SPO 5932 Ended no 1 0 0
19 UP2 4620 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jun 13 12:39:30 2011
===========================THanks for reply pls find dev_wo file.
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Mon Jun 13 11:05:11 2011
B create_con (con_name=R/3)
B Loading DB library 'K:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
B Library 'K:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'K:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.199)
B New connection 0 created
M sysno 00
M sid PRD
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 218
M intno 20020600
M make: multithreaded, ASCII
M pid 3776
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3776) [dpxxdisp.c 1164]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 16640 (832)
M DpShMCreate: sizeof(tm_adm) 2379840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 051B0040, size: 2675472)
M DpShMCreate: allocated sys_adm at 051B0040
M DpShMCreate: allocated wp_adm at 051B17D8
M DpShMCreate: allocated tm_adm_list at 051B58D8
M DpShMCreate: allocated tm_adm at 051B5900
M DpShMCreate: allocated wp_ca_adm at 053FA940
M DpShMCreate: allocated appc_ca_adm at 053FEF90
M DpShMCreate: allocated comm_adm_list at 05400700
M DpShMCreate: allocated comm_adm at 05400718
M DpShMCreate: allocated vmc_adm_list at 0542F518
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0542F540
M DpShMCreate: allocated wall_adm at 0542F548
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Jun 13 11:05:12 2011
M calling db_connect ...
C Prepending E:\oracle\ora92 to Path.
C got NLS_LANG='AMERICAN_AMERICA.WE8DEC' from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPPRD's password
C Connecting as /@PRD on connection 0 (nls_hdl 0) ... (dbsl 640 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 0463A5C8 0463F654 0463F0F8
C Attaching to DB Server PRD (con_hdl=0,svchp=0463F04C,srvhp=0463FC24)
C Starting user session (con_hdl=0,svchp=0463F04C,srvhp=0463FC24,usrhp=04648404)
C Now '/@PRD' is connected (con_hdl 0, nls_hdl 0).
C *** ERROR => ORA-980 when accessing table SAPUSER
[dbsloci.c 11772]
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=0463F04C,usrhp=04648404)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPPRD/<pwd>@PRD on connection 0 (nls_hdl 0) ... (dbsl 640 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 WE8DEC 1 0463A5C8 0463F654 0463F0F8
C Starting user session (con_hdl=0,svchp=0463F04C,srvhp=0463FC24,usrhp=04648404)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c 4508]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c 11404]
B ***LOG BY2=> sql error 1017 performing CON [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 1017 performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1282]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9696]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server abcbl_PRD_00 on host abcbl (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Mon Jun 13 11:05:12 2011
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9881
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3776) [dpnttool.c 357] -
i am having an MacBook Pro 13inch , having an Startup Problem , the time i press the power button after few seconds the apple symbol appears with a loading sign below it and wont go further ahead of it . My data is all in the hard drive .. . I even tried the Internet recovery but no use !!!! but still no respons and the recovery and macintosh hd is now lock! but earlier only the recovery is lock and after both of them is lock. i can reinstall,... and i didnt try to back up any data bec i dont know how? so please help me to resolve my prroblem.?
luoie wrote:
This thing happend,, it say Disk utility stopped repairing "Macintosh HD" disk utility can't repair this disk
Sorry, possibly you need a new hard drive or try reformating. First
you can try something like http://www.alsoft.com/diskwarrior/ it has been known to repair disk that DiskUtility could not. YMMV and they don't give it away.
If Disk Warrior can not repair then you need to Reformate the drive. Make sure you have a back-up in place no matter what.
http://www.apple.com/support/backup/
Disk Utility will tell you something about it's SMART status: -
What are the rules of purchasing an ipod?, Do you have to wait until your ipod won't charge anymore to get a new one?, I bought the most recent ipod shuffle in two thousand eleven, and it wasn't what I expected it to be, and I am planning on getting the ipod touch in a few weeks with my own money. What are the pros and cons of the ipod touch?, I have a friend who has the ipod touch and he says it is amazing!, also what is better the black player, or white player? What earbuds could I purchase?, The original ones that come with the ipods hurt my ears and they don't stay in well, also is it necessary to get a case, or should I just forget about it?, is facetime free or do you have to pay for it?. Is it necesary to have 32 gb?, or should I stick to 8 gb?
no, you have every right to buy an ipod, no matter how receant your old one. plus the company wants the money from buying an ipod. Pros and cons of ipod touchs are generally up to the user, but they are pretty cool. Black or white depends on your choice. Earbud wise, you could go for out of ear ones like headphones or even those ones with a removable tip. You WILL NEED A CASE for your ipod, as of they absorb shock if the ipod is dropped and prevents the thin glass screen from breaking. facetime is free as long as there is wifi. As to whether you want a 32gb or 8 gb is up to you, how much space do you want? What i will tell you about having an 8gb with apps, songs and movies it that it is actually really small. so it all depends on what you put on it. THERE are NO rules of purchasing an ipod.
-
Hello I have a problem with a Wifi Survey app, this app is from Access Agility, however this app was working fine, but without advise stop of working, I tried to open again, but app be close after few seconds. Every time that I tried to open it, in diagnostic and use create some files, in special one named LatestCrash-WifiSurvey.plist, this one generate an incident identifier E73B0164-CDFA-4E9E-839E-A0C021BD17A2, but this incident identifier change every time that I tried to open, the last incident identifier is: DE600EB3-AB57-4C33-8DE8-71F6788A7441.
After of it, I checked that the app had a new version available for downloading, I took a backup of my ipad and then upgrade this app, but is the same problem, all I want is to save the projects I had in this app, I´m afraid that if I delete this app and re-install it, probably I loss my projects.
Thanks for your help indicating how I can save my projects and see them for example in an iphone for assurance that data is not lost.
Something that called my attention is part of the log that shows a big CPU processing, but the strange thing is I killed all applications.
Incident Identifier: E73B0164-CDFA-4E9E-839E-A0C021BD17A2
CrashReporter Key: ed0ca1405ce83d4f80cb3cce063d7248d7b76e91
Hardware Model: iPad2,5
Process: WifiSurvey [139]
Path: /var/mobile/Applications/1BEEE35A-85FC-4BE4-B62A-39A930CB3CE2/WifiSurvey.app/Wi fiSurvey
Identifier: WifiSurvey
Version: ??? (???)
Code Type: ARM (Native)
Parent Process: launchd [1]
Date/Time: 2013-08-08 19:01:13.476 -0500
OS Version: iOS 6.1.3 (10B329)
Report Version: 104
Exception Type: 00000020
Exception Codes: 0x000000008badf00d
Highlighted Thread: 0
Application Specific Information:
com.accessagility.wifisurvey failed to launch in time
Elapsed total CPU time (seconds): 20.990 (user 20.990, system 0.000), 52% CPU
Elapsed application CPU time (seconds): 19.954, 50% CPUSee:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
My ipod touch 5th gen is stuck on activation error, how do i fix it?
My ipod touch 5th generation is stuck on activation error and I got this for Christmas so I don't know what the ipod developer program is! please help
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
How do I get my video playlists back on iPod Touch 4G after (epic fail) iOS6 update
As other users have identified, playlists present on iTunes on laptop but not on iPod touch 4G after iOS6 update except when select edit. Can I get them back? Not wasting time messing around. Either this is easily sortable or I get a new player from another maunfacturer - seems Apple can't be bothered to sort these issues so not sure I can be bothered with Apple anymore.
i had a problem simular after doing an update on itunes, I re-set=up the itunes according to my os and its working fine
-
Acrobat XI Pro automatically closes itself with no messages etc. after few seconds
Greetings all,
I don't know why but my Acrobat XI Pro (11.0.0) automatically closes itself (with no warning, no messages etc.) after few seconds. I installed the AXI as a part of the CS6 Master Collection on my Windows 8 (x64) laptop. Just as suggested at some other posts in the forum:
I checked the "security settings (enhanced)" tab but the protected view option is already off.
I searched for the eula.exe under the "Program Files (x86)\Adobe\Acrobat 11.0" folder but there is no eula.exe. May it be not present because I installed it as a part of CS6 Master Coll. package?
I am using Eset Endpoint Antivirus as a third party Anti Virus Software.
The problem occurs when:
I open up a pdf file from outlook etc.
I manually open a pdf file from windows explorer
I open adobe acrobat with no file to view
As I mentioned above, I see no error messages or warnings during the closing down. It acts as if I clicked the close button on the top right corner. I know that there are a lot of posts in the forum about this issue, but none of them helped me to solve my problem. I would be glad if you can help me with this problem.
Thanks,Hey i was having this issue also with Adobe Acrobat pro... it only seemed to be affecting one program that produced PDF output automatically. When the processes finished the PDF is supposed to be displayed and instead it would rapidly flash across the screen and close. THen i would have to hunt for the PDF to review its content. I tried a couple of things like deleting my preferences for acrobat C:\Users\[your user name]\AppData\Local\Adobe\Acrobat\10.0. You might have to show hidden files. In the explorer window select Organize-> Folder and search options-> once that opens view -> check show hidden files, folders and drives. then navigate that path above. Make sure adobe is closed then delete everything in there or move it off to another folder if your worried it will break it further.
That did not fix the problem though. I opened the application and ran my process again same results (adobe closes pdf auttmagically). so i opened adobe acrobat and navigated to Edit -> Preferences -> look under the General tab and click the select default PDF handler and that seemed to fix my problem. I also disabled the enhanced security look further down in that list under security enhanced. then a reboot so it is possible that the enhance security setting was the cause i think i will play with that for a minute to see if it was but i think my issue was the default handling. good luck -
I have a problem with youtube...i can't watch some videos from youtube! They stop after few seconds of playing!! what can i do to fix it??
Try loading the same video in different browsers (Firefox, Chrome, Safari and Internet Explorer are your best options). If the issue is across all of them, make sure you've downloaded the latest version of Flash at http://get.adobe.com/flashplayer/
If it's still stopping after that...Do the tried and tested method for everything: reset your router. -
Superdrive ejecting discs after few seconds ...
Hi,
Everthing worked well for 5 months ... After last update of the Tiger to 10.4.5 I have noticed that whatever type of disc I insert superdrive is ejecting it after few seconds. I've tried CD Audio , DVD's ever Tiger installation discs .. all were ejected after few seconds ...
Do you have any ideas what may be wrong ?
it's strange ???
Kind Regards
Ralphhi ralph--
i would try various things for this. first i would boot to open firmware holding apple-option-o-f and then type in the following commands--
reset-nvram (hit return)
set-defaults (hit return)
reset-all (hit return)
the last command restarts the computer. if that does nothing, then try an smu reset, which is quite simple for your model of computer. http://docs.info.apple.com/article.html?artnum=303446. also, install any available firmware updates for your computer. they are available on this page. http://docs.info.apple.com/article.html?artnum=303903 if that doesn't do anything, then i would try disk repair http://docs.info.apple.com/article.html?artnum=302672. and if that fails, then i would try the archive and install http://docs.info.apple.com/article.html?artnum=107120. but if you archive, make sure you repair the disk beforehand, and do software updates after. i would not archive and install without go through the other troubleshooting steps. hope this solves your problem. [ 8 ) ] -
ISA 550W : Youtube streaming stops after few seconds
Since I have installed the ISA 550W, the Youtube videos stops after few seconds. It happens on all my devices : Windows 8, Samsung Smart TV, Android, Windows Phone...
I have the lates firmware.
This problem does not occur with other streaming site like DailyMotion.
I diabled HTTP on antivirus but it has not changed anything. The web browsing is faster.
Application control is not enabled.
Any idea ? Thanks in advance.Hi,
i have do more test on this problem today and after disable all services and enable one by one i arrive on result is the Anti Virus block or disturbe the good process on download file for you tube or for another system.
My configuration is :
Product : ISA 550W
Firmware : 1.2.17
ISP : free with maximum 1Mo download with test linux image file from here :
http://www.ubuntu-fr.org/telechargement?action=dl
I hope this can be help cisco to find quickly solution because this solution can be temporary.
I no buy option "security services" to have this service disable.
thanks
The 09/10/2013 : you can enable anti-virus and disable HTTP scan and youtube work and download work fine. -
I upgraded to ios6.1.3 on ipod touch and after I completed a sync on my PC but I suppose it did not sync, because now it will not restore from a back up and wants to restore from another account that I have saved. Can I some how restore the apps to avoid having to pay for them again and having to recreate settings?
As I said, the backup that iTunes makes does not include apps (and music) if those items where not in the iTunes library on the computer on which you restored they will not be on the iPod.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Skype starts and closes after few seconds
Hi,
Please help!
My skype will open but after few seconds closes.. and I get the starting window of username and password...
I aready changed my password, and it did not help.
I ran DXdiang.exe, here is the file
Please help
Tomer
Attachments:
DxDiag.zip 10 KBSolved! I unlinked the Microsoft account and Skype works back like magic.
Maybe you are looking for
-
I can't open a catalogue because it says that another application already has it opened.
I am using Lightroom 4. I have been working on one catalogue & then switched to another. Everytime I try to open the first catalogue it say it is already open by another application. It is not open anywhere else. I have obviously rebooted my PC but t
-
Migration of 4.6c and 4.7 ISRetail
I have a scenario here, Can you help me by giving some suggestion.. Migration of SAP 4.6c + SAP 4.7 (IS Retail) to one single system First system runs in SAP 4.6C. a) Modules Implemented in First system: - MM-WM, SD, LIS, FI b) Server details
-
Shared calendar does not send notification of changes/updates
I just recently updated to iOS6 and began sharing my calendar with my girlfriend, who is iOS5. She is able to add and make changes to the calendar and I receive updates in the Invitations tray of the Calendar app. But when I make changes she is not
-
The ipod cannot be restored because it contains files that are in use by an
hello, i just got this ipod from ebay cuz i like the chubby shape! so.. when i first plugged it in it asked me to restore it into windows format as it's on a mac format... when i click restore, a few moments later that error pops up!! here: http://i2
-
Dear All, I need to do below I have one workflow task triggered to approver for approval of object. If Approver doesnt approve and complete the task in 72 Hrs , and reminder email should be triggered to Approver and one more user every day until he a