IPOD touch games won't work on my ipod

I downloaded games from the apps store. They said they were compatable with the ipod touch but everytime I open them on my ipod touch 8gb they just close again. Anyone got any ideas how to fix this?
Also I downloaded an audio book but my computer keeps asking me to authorize it and then it says it is authorized but it still wont play. What can i do?

jill26 wrote:
I downloaded games from the apps store. They said they were compatable with the ipod touch but everytime I open them on my ipod touch 8gb they just close again. Anyone got any ideas how to fix this?
what OS are you running on your Touch ? many apps require iOS 2.x or later ...
Also I downloaded an audio book but my computer keeps asking me to authorize it and then it says it is authorized but it still wont play. What can i do?
see if this support article helps.
JGG

Similar Messages

  • IPod touch 3G won't work after falling in water? Help!

    Ok it's been 3 months since my iPod touch fell in the...toilet. I immediately put it in rice after pushing all the buttons. It was only in the water for a second. When I picked it up the screen was dim, flickering, then when black. I wiped it off and put it in rice. I left it in rice for about four days. I finally plugged it up to the charger and after 20 minutes it came on. It told me I needed to plug it up to iTunes so I did. I restored it and when it was restored I tried to slide the bar at the bottom of the screen but it would never register. So I let it die and when I charged it again it wanted me to restore it AGAIN! I've restored it about five times!! Each time the touch screen won't work and it doesn't hold a charge very well. Also every time it does it wants me to restore it. What's wrong with it and how can I fix it? Oh and the home button doesn't work.

    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
      Apple - iPod Repair price             
    SarahAsh004 wrote:
    Could an apple person help? If so, how much would it cost?

  • HT201406 What do I do if my Ipod touch 4 will turn on, but the touch screen won't work so I can't unlock it?

    This has happened 3 times... my Ipod touch 4 will be fine one minute,but then the next time I turn it on the screen won't pick up when I touch the screen it wont pick it up. I can't unlock it or completely turn it off becasue the touch screen won't work, but I know it is still alive becasue when you press the home button my lock screen turns up. if you know how to fix this bug please tell me how.

    Did you try to connect in recovery mode and set it up as new device?
    iOS: Unable to update or restore
    How to back up your data and set up as a new device

  • HT201406 IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even powe

    IOS7 installed OK to my iPhone 4S and worked OK for a while but I have somehow managed to completely jam my iPhone 4s. The touch screen won't work except for up and down gestures (some of the time). I can't make or answer calls, I can't even power if off. I can't access the hardward ID which Apple support seems to require for Chat.
    It might have happened when I was accessing my camera bypassing the lock screen!
    All I know is that the thing is now useless and it looks like I will have to wait for the battery to run down to see if powering it back up afterwards will solve the problem.

    I have since discovered the "hold down home key and power button" together for a few seconds and this seems to have worked .... phew!

  • Touch Id won't work suddenly, why ?

    hey guys,
    I've an iPhone 5s, and I upgrade it to 8.1 ,now my touch id won't work.
    when I tap on "Add a fingerprint" immediately shows below image.
    I try to restore, but the problem not fixed,
    is it hardware or software?
    and is there any app for diagnosing iDevices ?

    thnx for your reply buddy, but it doesn't work too

  • Wacom Intuos Tablet Touch Function Won't Work On Mac OS X

    Hi there,
    I recently purshased a Wacom Intos pen & touch tablet, model CTH-480. But the touch function won't work.
    I've done the following, but it still won't work:
    1. Re-install the driver to the latest. (Driver Driver 6.3.8-2 from http://us.wacom.com/en/support/drivers/)
    2. Turned on the switch on the tablet. Whenever I touch the tablet, the blue signal light at the top-right corner will be on.
    3. In the app named "Wacom Desktop Center", the "Touch Settings" shows "Touch On". So the software is configured well.
    4. In the "System Preferences" --> "Walcom Tablets", the "Touch Options" is available and is able to configure. There's no option there which saya "Enable Touch Input" as seen in some tutorials online.
    The other functions are perfect. I can use the pen, I can set custom functions to all buttons on the tablet.
    Someone meet similar problems before? I sincerely appreciate your help!
    Best Regards,
    A new Walcom user in desperate

    I had the same exact problem. No matter what I did, tablet LED lights and diagnostic testing mode indicated touch sensors working but no corresponding screen functions. This included removing the app/plist installation through CleanMyMac 2 and a subsequent reinstall. You may have fixed your problem by now but Wacom customer support sent me this advice within a day and it worked for me on first try.  Touch gesture and pen functions seem to work equally well now.
    Key is to use the uninstall utility within the Wacom app itself.
    Thank you for contacting Wacom Customer Care. The problem that you received maybe cause by a corrupted driver file. While you may have already reinstalled the driver, please follow these specific instructions:
    Open your Applications folder and locate any Tablet or Wacom Tablet folders you have
    Use the Utility in each of these folders and click ‘Remove’ under ‘Tablet Software’
    Once the software is removed, restart the computer
    Once this is complete, download and install the latest 6.38 driver from: (Current as of Aug 2014)
    http://cdn.wacom.com/u/productsupport/drivers/mac/professional/WacomTablet_6.3.8 -2.dmg
    As always, make sure your tablet is connected directly to your computer. Avoid using USB hubs, keyboard/monitor ports, or docking stations with the tablets, as they can cause inconsistent behavior.

  • My iPod touch speaker won't work and the headphones don't work sometimes

    If I try to play a song or video without headphones it won't have sound and sometimes I can't listen with headphones either. I tried reseting the iPod and restoring it but it still won't work. Please please help. I just got it a few weeks ago and haven't dropped it or gotten it wet I have no idea how this happened

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ipod touch imessages won't work!!

    I downloaded the new ios6 for my ipod touch and now my imessages wont send! The send bar goes almost all the way then stops and fails! ios5 worked fine! Any ideas??

    try
    iOS: Troubleshooting Messages
    and
    iMessage won't work after iOS 6 upgrade: Apple Support Communities

  • Ipod touch 5 won't work

    I dropped my ipod touch 5th gen on the floor and it shut down. i tried the recovery mode by pluggin it in the computer and itunes and even though it find it and shows me to restore it, it won't work all the way and on the screen there is the empty battery amd even though it's plugged in, it's not charging. and itunes says that can't find the software or device and can't do the restore. i asked somebody and they said that there musy be something broken inside, most likely something with the battery...what should i do? are there any chances for my ipod to be fixed?

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    Hopefully only a loose connection but could be more.

  • Older Games won't work...

    I have Zuma and Musika, which I bought for my older 5.5 gen Video Ipod.
    I recently bought a Classic and the games won't sync to it. I looked in the iTunes games store and they indicate only a couple of games are compatible with the Classic.
    Is Apple going to update these games so they work on the Classic or are they just going to screw me out of my games?
    Does anyone know the email for this type of support?

    True. I helped them get even more richer this week by spending $350 on the Complete Bob Dylan and the Complete U2. Great stuff there. Apple is supposed to be making money and there is nothing wrong with that.
    Next generation iPods will require new games then too.

  • Touch screen won't work, and it's on lock

    I have this ipod that I've been trying to fix for someone, as well as load up songs from itunes. I've successfully synced songs to it to it's full capacity (8G). However, when it was done, I ejected it and tried to listen to it to see if it was working properly. The screen is locked, as well as the touch screen isn't working as if it's completely dead. I've never had this problem as I am familiar with Ipod Touches and Nanos. Does anyone have any remedies or suggestions?? Gonna try other things in the meantime.

    Hi Wazzup483, Im having the same problem you had. Screen locked, touch screen not responding and it won't stop playing music. It licked while I was listening to music. Took out my pocket and it was locked, guess I hit something.
    HELP :o)
    Thanks

  • My Sims 3 game won't work on my macbook pro.

    This message comes up when i try open it : "Cant open application Sims 3 in launcher." And then this: "-10810" Please try explaining this to me in an easy language, because i really wonder why **** won't work.This message comes up when i try open it : "Cant open application Sims 3 in launcher." And then this: "-10810" Please try explaining this to me in an easy language, because i really wonder why this won't work. I have tried reinstall it but it does not change anything, I have recently updated the game but i haven't had problems about this before. Why is this happening?

    Morning Alison Mcshane,
    Thanks for using Apple Support Communities.
    The System Management Controller (SMC) is responsible for many low-level functions on Intel-based Macs.
    For more information on this, take a look at this article:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Best of luck,
    Mario

  • Updated to 7.7 - now youtube and flash games won't work

    I upgraded to 7.7 a while back and ever since then I can't get youtube videos to load or play flash games online though safari. Any idea what could be causing this problem. Please let me know!

    shakejke wrote:
    i updated to maverick and now my toshiba hard drive won't work
    whats the format on the external HD?
    verify same on another Mac, its likely a dead SATA card inside the external enclosure.
    One assumes you arent referring to a 2012 Air with a Toshiba SSD, since the Air contains no hard drives, only a SSD.
    2013 Air use Sandisk or Samsung SSD.

  • Encore WT8 touch screen won't work, prevents me from logging in

    I have just bought this tablet but it is a Dabs refurbished model, so not sure of its history. I went through the setup process and brought it on holiday. I discovered that once it was setup, every time it went into sleep mode or was powered off, the touch screen became unresponsive after it powered back up. I don't have an OTG cable, or a keyboard/mouse for that matter. In a small town where it won't be possible to buy one. May just have to wait until I get back and can use a cable and keyboard to log in. Not sure what the pattern is but from time to time, it has reacted to touch and allowed me to log in. When it did, I performed all windows updates, including drivers that were suggested. I have an old XP laptop which I am using now and once when I plugged it in via USB, it got the screen working for long enough to let me log in but that won't work now.  I tried to log in from my Lumia using RDP but it says it can't. May just be the version of 8.1 that's on the tablet.  I can get into the BIOS menu and the touch screen works in there. It is at V2.00 and the tablet is a PDW0AE-00900PEN Any other suggestions or should I give up and enjoy my holiday?

    The screen rotates as normal. I tried resetting the device but it doesn't work. In the device manager, it shows that the I2C HID device has a problem. It fails to start. This doesn't change after a reset. I dug a little deeper and the driver is hidi2c.sys. There doesn't seem to be a newer version of the driver. I did some reading and found people commenting that Toshiba aren't very good at fixing this sort of driver issue. it also may be that a windows update has caused a conflict which may be fixed by Microsoft. Either way, I can't see any way for me to fix this besides resetting my tablet to factory and preventing windows updates. I may do that once I am somewhere with more resources around me.

  • HT1222 Just upgraded now my touch screen won't work?

    Just updated iOS to 6.1.3.
    Now my touch screen won't respond..?

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

Maybe you are looking for

  • How do I STOP synching contacts with FB?

    I accidently answered yes at the initial setup - but I no longer want to synch FB with my contacts.  Does anyone know how to change that setting? I have the iPhone 4  (not S) TIA!

  • Youtube and Airplay with iPhone 5

    I was trying out the youtube app on my new iPhone 5 and for some reason when I click the airplay icon and choose appletv only the sound works not the video on the TV. Anyone know why? I can play videos and show pictures from my phone through appletv

  • Xsl mapping - for each

    HI, my xsl mapping is working fine but the output is wrong. I need the information from the E1EDK02/BELNR if the E1EDK02/QUALF="002". Where is the mistake located ? The BELNR is allways the first one of all E1EDK02.   <xsl:for-each select="ORDERS05/I

  • Lightroom Slideshow 1080P/720P/ 720x480 - IPad 3

    These formats no longer show on my IPad 3 at one time they did. I have created slideshows that are linked through a URL to my website for several years now I have created them in 720p format and been able to veiw on my IPad 3, IPhone, Web etc. Recent

  • Obligatory mark for select options

    Hi experts, I have a requirement where both low and high field of select -option should be mandatory. Code i have written is :s_period  for cgpl_project-createdon. But only the low field is made obligatory.How to make high field as oblogatory too....