IPod Touch (Gen 1, Software 3.0) running hot/locking up.
In the last few months, I have been having a recurring problem with my iPod Touch (Gen 1, now running 3.0), where on occasion it starts feeling incredibly hot to the touch, the screen freezes, and it refuses to accept any input from anything but the home and the lock/power key.
I've ruled out environmental causes, and also it doesn't seem to be software/apps causing the problem, as I first encountered it at V2.2, and it has happened with just a clean install on there as well.
Any ideas to what could be causing this, or to a potential solution?
This is not a bug but a problem with the software or hardware on your individual iPod. You have not mentioned try to fix it by doing a restart, reset, or a restore. These types of minor problems generally respond well to one of those remedies.
However, if your problem doesn't go away, you may have a problem with the touch screen. If you are still under warranty, then a trip to the closest Apple store might be a good idea.
Similar Messages
-
IPod touch gen 2 software update
Hi. I have an iPod touch generation 2. Can I get iOS 5 or an least late enough to get a few game apps for my son? Thank you
It can't be updated past 4.2.1.
(89709) -
Is there an easy way to find apps that will run on an ipod touch gen 2 with iOS 4.2.1?
My grandson's ipod touch gen 4 was stolen so I picked up a used ipod touch gen 2 only to find out I can't upgrade beyond 4.2.1 iOS, so I am trying to find apps that run on that iOS. Enter an unfriendly App Store for those of us not used to using it!
Can someone please tell me an easy way to find apps for him to run on this older system?
Thanks in advance!You can also use this more manual but free method,
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/finding-a pps-for-older-devices -
my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod Touch Gen. 5 isn't being detected?
I plugged in my (new, recently bought) iPod Touch Gen. 5 to my computer (I use Windows, btw), and the Music library detected it. Good. THen i went to WIndows Media PLayer and iTunes to sync music onto it but it didn't detect my iPod at all So I unplugged it and plugged it back into another USB port. Nothing changed! So I resstarted my computer, itunes, and then ipod. Nothing happened, either.
WHat should i do? i really wanna get music onto it.Windows Media Play will not detect the iPod. Yo have to use iTunes for syncing.
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem? -
HT4623 iOS7 available ipod touch Gen 4?
Is iOS7 available for the ipod touch Gen 4? My ipod is currently running 6.1.3. I hooked my ipod up to itunes and is shows it's running the latest software.
iTouch 4G does not have enough RAM to run iOS 7. Sorry.
-
My Ipod Touch Gen 5 will not show up in Itunes but it shows up under "My Computer" help!
I have a new Ipod touch gen 5. It shows up under my computer but not under devices in the side bar like it should with Itunes 11. I'm running the latest firmware for my new Itouch and the latest Itunes. I hope I don't have to uninstall my itunes as I have ALOT of music on it. I dont wanna lose it all. I'm running windows 8 and followed the tutorial to a "T" to try to fix the problem but nothing worked. I did everything except the last step. Even checking my Computer for Updates (Itunes will not run if updates to my PC are needed). Help Please!
Here is the Diagnostic Report. I don't understand it very well.
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Hewlett-Packard HP 2000 Notebook PC
iTunes 11.0.2.26
QuickTime 7.7.3
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
VoiceOver Kit 1.4.2 (222093/222742)
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 008BBCB0094EF9B0
Current user is not an administrator.
The current local date and time is 2013-04-04 22:41:18.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {2CAAFB10-5680-46C7-8613-2EDADF28585D}
Description: Microsoft Hosted Network Virtual Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {5CE73756-BD5A-4D93-9DF9-A9316C4A6ED7}
Description: Microsoft Wi-Fi Direct Virtual Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {4CDB268D-46F1-4C51-AAC1-A9F6B76B50F2}
Description: Qualcomm Atheros AR9485 802.11b/g/n WiFi Adapter
IP Address: 192.168.1.125
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Thu Apr 04 21:42:42 2013
Lease Expires: Fri Apr 05 21:42:42 2013
DNS Servers: 209.18.47.61
209.18.47.62
192.168.1.1
Adapter Name: {406A6EC4-A42A-4564-810E-0501F8EED96A}
Description: Realtek PCIe FE Family Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-04-04 22:24:30.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
E: hp DVD A DS8A8SH, Rev KH62
Drive is empty.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: hp DVD A DS8A8SH on CDR media at speed 10X.
**** Device Connectivity Tests ****
iPodService 11.0.2.26 (x64) is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
No Universal Serial Bus Controller found.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod shuffle (4th Generation) running firmware version 1.0.1
Serial Number: CC4H77LFDFDP
**** Device Sync Tests ****
No iPod, iPhone, or iPad found. -
I have just tried to install the full version of Anthill to my iPod touch Gen 4. I get a message on the iPod saying "Anthill failed to install" and an error on the computer "OxE8000004". I already had Anthill Free installed so deleted it in case it was interferring with the new download. I can install other free apps but now can't even install Anthill Free. I have tried the 7 resolution steps advised by Apple and have totally run out of ideas as to what I can try next. I am using a new laptop since installing Anthill Free the first time and am now running Windows 7, otherwise everything else is the same. Any help would be sincerely appreciated. Thanks.
- Maybe here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
- Try redownloading the app directly to the iPod by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
HT201272 my ipod touch gen 2 will not accept the new ebay app how do i get?
hi,
how do i get the old ebay app my ipod touch gen 2 will not accept the new version?If you didn't previously download the eBay app and have it still in a backup or somewhere, then you can't. The current version of the eBay app requires iOS 4.3 which will not run on a 2nd-generation iPod touch.
Regards. -
Does BT Fon/Openzone work with an ipod touch gen 1...
Hi,
I am a BT Infinity customer and have opted in to BT Fon. I cannot get my ipod touch gen 1 to work with a BT Fon or Openzone network. I can connect to my BT home hub as well as various friends' networks but for some reason I can't get the BT Fon/BT Openzone to work. It sees the network and in Settings-->Wi-Fi Networks I have deleted the initial 10.xx.xx.xx entry (leaving the "192.168.22.22, 192.168.22.23" with no leading space) and it says it has connected. When I go into Safari and try and enter any URL it says "connecting..." but I do not get the landing page (to enter my details) and it eventually times-out with a "Cannot open Page. Safari could not open the page because the server stopped responding" message. This even happens when I try and use the BT Fon part of my home hub!
Any ideas why this isn't working? I have tried various BT Fon/Openzone points and none of them work. Any help would be most appreciated!
P.S. I cannot use the BTFON app as it is not compatible with the ipod touch gen 1 (I have the latest version of the ipod gen 1 software which is 3.1.3).Well, I've tried various networks and various settings and I simply cannot get the ipod touch to work with BT Fon/Openzone.
I have to say I'm very disappointed with this - it was a toss-up for me to join either Virgin Media or BT Infinity and the only thing that swung it was the opportunity to use BT Fon/Openzone points when out and about. I think I've made the wrong choice as it is pretty useless to me now.
Also, the BT Fon website claims that in the area where I work there a lots of BT Fon/Openzone networks but I spent an entire lunchtime walking around with my ipod checking the available networks and only found two - both with fairly weak signals that occasionally disappear and reappear. Anyone else noticed this too?
I'm fairly sure it's not my ipod as it will happy connect to my homehub from the bottom of my garden which is around 30 metres away from the hub.
Another disatisifed BT customer. -
My ipod touch gen 5 is disabled and wont sync, i tried to reinstall the itunes (yes, the latest version) but still itunes doesnt recognized my device. help
Did you place the iPod in recovery mode? That is required for a disabled iPod
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I have iPod touch gen 4.
stuck and then I restored
when restore view pop up error 1602
I browsing abaout error 1602. it said, cause software update and firewall.
I think my laptop is up to date.
and I restore to macbook still view 1602
mm.
maybe is problem hardware?
if problem hardware approximately what is a part problem?Error 1604
This error is often related to USB timing. Try changing USB ports, using a different Dock Connector or Lightning Connector to USB cable, and other available USB troubleshooting steps. If you're using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue isn't resolved by USB isolation troubleshooting and another computer isn't available, try these steps to resolve the issue:
Connect the device to iTunes.
Confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode.
Try to restore again.
If the steps above don't resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. You may resolve this error by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. Learn more about troubleshooting security software.
Could be a hardware problem since:
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store. -
Anyway to transfer ipod touch 2.2 software upgrade to latop.
I just bought the ipod touch 2.2 software and and when I tried restoring my ipod touch I get a error (unable to restore ipod, error occured at 13). I just wanted to know how to transfer the software to my laptop
Thanks.It seems to be a 2.2 problem. I had loaded 2.0 and 2.1 with no problem. 2.2 bricked my 1st gen 16gb iTouch. I had to take it to the apple store. They told me that it had to do the anti-virus software on windows.
I do not believe there is a fix for it. You probably will have to take it in. Prior to taking it in I had tried disabling the firewall and even removing the anti-virus software but it would not work. -
How to update ipod touch gen 2
Is there anyway to upgrade the software on the ipod touch gen 2, its up to date on the software but need a newer one is it possible to get newer software to get more games and apps to work. Any help would be great.
The CPU in that device does not have enough internal RAM to support any iOS above 4.2.1
But, there are still over 60,000 alternative vintage apps available that will work on it. -
Is iPod Touch Gen 4 affected by USB3?
Is Ipod Touch Gen 4 affected by USB 3 or Norton 360?
As of now iDevices do not have support for USB 3.0.
I don't know what you are asking with respect to Norton 360. Anti-virus software on your computer should not impact the use of the iPod nor its connection to your computer.
Maybe you are looking for
-
"Failed to talk to init daemon" after waking from suspend
I got this shitty poulsbo driver and I've been having this issue for some time now. When I close the laptop lid and complete the suspend/wake-up process more than once, it no longer suspends and cannot poweroff/reboot the machine at all. When I try t
-
Ok, With 7, BOTH during AND after closing, Windows pops up, FF has to close, would you like to report? Does this twice. This happen about half the time I use FF. If it happens while in FF, it doesn't close, works fine after this, and closes OK This d
-
Problem of retrieve a set of data when calling store procedure using vb with ODBC
when I use ODBC, it can return 1 record (1 field) using pass and retrieve the parameter. but it cannot success when return a set of data (using recordset to store it), when i do it, the error message (Multiple-step OLE DB operation generated errors.
-
HT1766 itune has detected an iphone in recovery mode
itune has detected an iphone in recovery mode, you must restore this iphone before it can be use with itune. Can someone help how can I resolve this without having to clear all my data in my iphone 4S?
-
Host stats from Enterprise Manager
Hi Experts, actullay i want to get CPU, RAM SWAP all System related stats from Enterprise Manager in a Coustomze manager that is the usage frm this 9Am To 10 AM of 13 Feb is there any way to do sooo.. actually i could not see any option for coustom t