Ipod touch, gen. 4, cant get to enternet!
i just got a new ipod 4 gen and i dont know how to connect to enternet!it says choose networe...other...i dont know wat that means plz help
Your iPod touch can connect to the Internet through wireless. In order to connect to wireless you first have to have a wireless router which you have to buy and connect to your modem which provides internet to your house. once you have done this you can go to settings on your iPod and tap the wireless item near the top of the list. within a few seconds the iPod should display a list of names. Select the name of your network which will be mentioned in the manual that came with your router and you should be good to go.
Similar Messages
-
my ipod touch is stuck on the restore picture and when i try and sync it to itunes i cant sync to itunes because i have a password on my ipod touch and i cant get to the main screen so how do i reset my ipod ?
Connecting in recovery mode will help: http://support.apple.com/kb/HT1808
-
I have a ipod touch , and i cant get it to verfiy my email .what do i have to do?
i cant get my ipod touch to dl apps , its saying my email verfify .
What happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs? -
i dont know what else to try plz hellp
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
the ipod wont load any of my games even if i delete them and redownload them they wont load
Download and run AdwareMedic
Cheers
Pete -
"....could not be synced because the sync session failed to start." I have synced this iPod with this MacBook Air about 6 weeks ago. Now it won't sync. A possible solution is to delete the backup file located in Mac:~/Library/Application Support/MobileSync/Backup/ However, I don't have a "MobileSync" folder in my Application Support folder. Please help.
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
Also:
https://discussions.apple.com/thread/3415227?start=0&tstart=0
https://discussions.apple.com/message/16400530#16400530 -
My main PC with my Itunes Library just crashed. I still have all my music on Apple TV, Ipod Touch (Gen 2), and Iphone 4 (verizon). How can I get everything set up on a new PC and working ?
I downloaded Itunes 10.2 on new desktop, ran sync with my ipod touch (Gen 2) and have all my music on new PC. Just can't get it to sync with my Apple TV (Gen1). I have made music purchases on Apple TV and cannot get them to Ipod/Iphone? Help
-
I have just tried to install the full version of Anthill to my iPod touch Gen 4. I get a message on the iPod saying "Anthill failed to install" and an error on the computer "OxE8000004". I already had Anthill Free installed so deleted it in case it was interferring with the new download. I can install other free apps but now can't even install Anthill Free. I have tried the 7 resolution steps advised by Apple and have totally run out of ideas as to what I can try next. I am using a new laptop since installing Anthill Free the first time and am now running Windows 7, otherwise everything else is the same. Any help would be sincerely appreciated. Thanks.
- Maybe here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
- Try redownloading the app directly to the iPod by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
My ipod is broken so a friend gave me their old ipod touch but they cant remember the code. How can i unlock it and get it to work on my computer? Please help
The iPod needs to be restored but it only be restored from the computer it was last synced with
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iPhone and iPod touch: Unable to update or restore -
3rd gen iPod touch. I just get a blank screen (after a few secs of the apple symbol) when it is switched on or when connected for charging. I know the connections are OK. Suggestions/help please
I took the iPod to the local Apple shop. The guy put the iPod onto a docking station and checked it - answer "connections are OK". I have used the link before but have not gone through all its suggestions (although picked on the most relevant ones). I may have to go back. Thanks again for your suggestions
-
So if I have a 1st or second gen ipod touch, where can I get old versions of apps that run on it?
An iTunes library you previously downloaded those versions to, or a backup of that library.
(78137) -
HT201272 my ipod touch gen 2 will not accept the new ebay app how do i get?
hi,
how do i get the old ebay app my ipod touch gen 2 will not accept the new version?If you didn't previously download the eBay app and have it still in a backup or somewhere, then you can't. The current version of the eBay app requires iOS 4.3 which will not run on a 2nd-generation iPod touch.
Regards. -
IPod 4th Gen will not get app updates ...error states cant connect to iTunes
iPod 4th Gen will not get app updates ...error states cant connect to iTunes
See here: https://discussions.apple.com/thread/4233381?tstart=0
B-rock -
I had my computer wiped and they accidentally wiped my itunes! I have a iPod touch gen 3 but i cant now download or put more music on, without the whole thing being wiped, and I have spent a lot of money on songs and apps! Does anyone have an ideas about what I could do, to prevent all my things deleting, because I won't be spending more money on apps that I have already purchased once!!
Thank you,1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer. -
How can i get the new update on my ipod touch gen 1
I have the oldest ipod touch how can i get the new soft ware in it
The 1G iPod can ony to to iOS 3.1.3 that you get here:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -
My iPod Touch Gen. 5 isn't being detected?
I plugged in my (new, recently bought) iPod Touch Gen. 5 to my computer (I use Windows, btw), and the Music library detected it. Good. THen i went to WIndows Media PLayer and iTunes to sync music onto it but it didn't detect my iPod at all So I unplugged it and plugged it back into another USB port. Nothing changed! So I resstarted my computer, itunes, and then ipod. Nothing happened, either.
WHat should i do? i really wanna get music onto it.Windows Media Play will not detect the iPod. Yo have to use iTunes for syncing.
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
Maybe you are looking for
-
Values in one field based on another field in the paper parameter form.....
Hi All, I have two fields in the parameter form. One named 'employee number' and the other named 'document number'. Now, there are multiple document numbers for every employee. I'd like the document numbers to be displayed automatically as an LOV or
-
I already install the cd in my Mac but still not working. Please help me. Thank you
-
Migration of planning from essbase side
Hi, Planning Migration have: 1) migration of provisioning (CSSImportExport utility) 2) migration of planning application (using schema restore on dummy application) (data form, outline, task list, etc....) 3) migration of essbase objects for planning
-
How to recreate enterprise manager with database vault
I'm testing the Oracle database Vault option at database version 11.1.0.7 but there are some thing that does not work correct in the test. One of them is that I do not be able to recreate the enterprise manager repository. After probe several ways wi
-
Why do i not have the build in templates like this http://www.youtube.com/watch?v=d635eFFMN2I&feature=related in Motion 4? And where can i get them? And where can i get other templates to Motion 4 for free?