IPod touch gen 4 error 1602

I have iPod touch gen 4.
stuck and then I restored
when restore view pop up error 1602
I browsing abaout error 1602. it said, cause software update and firewall.
I think my laptop is up to date.
and I restore to macbook still view 1602
mm.
maybe is problem hardware?
if problem hardware approximately what is a part problem?

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different Dock Connector or Lightning Connector to USB cable, and other available USB troubleshooting steps. If you're using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue isn't resolved by USB isolation troubleshooting and another computer isn't available, try these steps to resolve the issue:
Connect the device to iTunes.
Confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode.
Try to restore again.
If the steps above don't resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. You may resolve this error by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. Learn more about troubleshooting security software.
Could be a hardware problem since:
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.

Similar Messages

  • I have an issue with my iPod touch gen. 5 connecting to my iTunes. iTunes says my device has an error, but it does not specify the error and I can't do nothing. I was transferring more music and editing my playlists. My songs and movies are gone.

    What can I do to solve an issue with my iPod touch gen. 5 32 gb on connecting to iTunes on my computer? iTunes says there is an error with my iPod touch, which this was a result of deleting my songs and videos. I was only transferring more songs, videos and editing my playlists. I don't have that much of the songs left. What is the best solution?

    And what is the wording of the error message?

  • Ipod touch gen 2 will not sync - internal device error

    I am unable to sync my ipod touch gen 2.  It keeps on coming up with multiple errors including:
    Device is not responding
    Internal device error
    Unknown error 0xE800400C
    I have tried restoring numerous times.
    Please help

    Try this article:
    http://support.apple.com/kb/TS3221

  • Could not restore 1st gen ipod touch unknown error occurred(2003)

    could not restore 1st gen ipod touch unknown error occurred(2003)

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    Also, have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • My Ipod Touch Gen 5 will not show up in Itunes but it shows up under "My Computer" help!

    I have a new Ipod touch gen 5. It shows up under my computer but not under devices in the side bar like it should with Itunes 11. I'm running the latest firmware for my new Itouch and the latest Itunes. I hope I don't have to uninstall my itunes as I have ALOT of music on it. I dont wanna lose it all. I'm running windows 8 and followed the tutorial to a "T" to try to fix the problem but nothing worked. I did everything except the last step. Even checking my Computer for Updates (Itunes will not run if updates to my PC are needed). Help Please!

    Here is the Diagnostic Report. I don't understand it very well.
    Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
    Hewlett-Packard HP 2000 Notebook PC
    iTunes 11.0.2.26
    QuickTime 7.7.3
    FairPlay 2.3.31
    Apple Application Support 2.3.3
    iPod Updater Library 10.0d2
    VoiceOver Kit 1.4.2 (222093/222742)
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 008BBCB0094EF9B0
    Current user is not an administrator.
    The current local date and time is 2013-04-04 22:41:18.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {2CAAFB10-5680-46C7-8613-2EDADF28585D}
    Description:          Microsoft Hosted Network Virtual Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {5CE73756-BD5A-4D93-9DF9-A9316C4A6ED7}
    Description:          Microsoft Wi-Fi Direct Virtual Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {4CDB268D-46F1-4C51-AAC1-A9F6B76B50F2}
    Description:          Qualcomm Atheros AR9485 802.11b/g/n WiFi Adapter
    IP Address:          192.168.1.125
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.1.1
    DHCP Enabled:          Yes
    DHCP Server:          192.168.1.1
    Lease Obtained:          Thu Apr 04 21:42:42 2013
    Lease Expires:          Fri Apr 05 21:42:42 2013
    DNS Servers:          209.18.47.61
                        209.18.47.62
                        192.168.1.1
    Adapter Name:          {406A6EC4-A42A-4564-810E-0501F8EED96A}
    Description:          Realtek PCIe FE Family Controller
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          No
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-04-04 22:24:30.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.3.0),
    E: hp DVD A  DS8A8SH, Rev KH62
    Drive is empty.
    The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: hp DVD A  DS8A8SH on CDR media at speed 10X.
    **** Device Connectivity Tests ****
    iPodService 11.0.2.26 (x64) is currently running.
    iTunesHelper 11.0.2.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    No Universal Serial Bus Controller found.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod shuffle (4th Generation) running firmware version 1.0.1
    Serial Number:          CC4H77LFDFDP
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

  • TS1702 I have just tried to install Anthill to my iPod touch Gen 4. I get a message "Anthill failed to install" on the iPod. I already had Anthill Free installed so deleted it. I can install other free apps but not Anthill Free. Have tried the 7 steps. An

    I have just tried to install the full version of Anthill to my iPod touch Gen 4.  I get a message on the iPod saying "Anthill failed to install" and an error on the computer "OxE8000004".  I already had Anthill Free installed so deleted it in case it was interferring with the new download.  I can install other free apps but now can't even install Anthill Free.  I have tried the 7 resolution steps advised by Apple and have totally run out of ideas as to what I can try next.  I am using a new laptop since installing Anthill Free the first time and am now running Windows 7, otherwise everything else is the same.  Any help would be sincerely appreciated.  Thanks.

    - Maybe here:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
    - Try redownloading the app directly to the iPod by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Ipod Touch (GEN 2) is not being seen under devices in my Itunes

    My Ipod Touch (GEN 2) is not being recognized under devices in my Itunes. My computer is recognizing it as a device under device manager, but it is not showing up under devices in my Itunes. I am also getting this error message saying "Itunes Could Not Connect to this Iphone because an unknown error occurred (0xE8000065)", and the weird thing about it is that i do not have an iphone but an ipod touch. I have followed the steps on the support website and they have not helped. Iam out of ideas and i really need some help. Please Help!!

    I would start here:
    http://support.apple.com/kb/TS1495
    (iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows)

  • "iTunes could not connect to iPhone (its a ipod touch) unknown error OxE8000065. Help!

    Ran updates on my MacBook Pro. Then I updated iTunes,  iPod touch was connected at time, came up with unknown error 1602 during restore and now "iTunes could not connect to iPhone (its a ipod touch) unknown error OxE8000065. Help! ipod screen is black (can see it stopped while charging at 2.53). Have tried many of the suggestions found in Apple support and online.

    http://support.apple.com/kb/TS3694#error1602
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • My main PC with my Itunes Library just crashed.  I still have all my music on Apple TV, Ipod Touch (Gen 2), and Iphone 4 (verizon).  How can I get everything set up on a new PC and working ?

    My main PC with my Itunes Library just crashed.  I still have all my music on Apple TV, Ipod Touch (Gen 2), and Iphone 4 (verizon).  How can I get everything set up on a new PC and working ?

    I downloaded Itunes 10.2 on new desktop, ran sync with my ipod touch (Gen 2) and have all my music on new PC.  Just can't get it to sync with my Apple TV (Gen1).  I have made music purchases on Apple TV and cannot get them to Ipod/Iphone?  Help

  • My iPod Touch Gen 5 will no longer synch with iTunes on my computer.  Only change since this happened is update to iPod to OS 8.1.1  iPod synch remains stuck in "Step 8 of 8"

    My iPod Touch Gen 5 will no longer synch with iTunes on my computer.  Only change since this happened is update to iPod to OS 8.1.1  iPod synch remains stuck in "Step 8 of 8"

    On your computer go to the control panel (hover in the lower right corner) then programs, add/remove programs
    Uninstall iTunes, Apple Mobile Device Service, Apple Application Support then go to apple.com and redownload and reinstall iTunes and try again.
    You won't lose any content, you're not deleting that, just the programs that access them.
    What is thought to happen is that sometimes a new version of itunes doesn't update the drivers in those other two programs. The only way to update the drivers is to force it by uninstalling the programs which allows itunes to write the correct ones.
    My iPad and iPod did exactly the same thing and this is how I fixed it.

  • When I plug in my iPod Touch a error pops up saying 'iTunes could not connect this iPhone. An unknown error occurred (0xE8000084)." What do I do??

    My ipod is exactly 2 years old, and it has nothing to do with the cable connecting it to the computer for all I know.

    See:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • IPod Touch (Gen 1, Software 3.0) running hot/locking up.

    In the last few months, I have been having a recurring problem with my iPod Touch (Gen 1, now running 3.0), where on occasion it starts feeling incredibly hot to the touch, the screen freezes, and it refuses to accept any input from anything but the home and the lock/power key.
    I've ruled out environmental causes, and also it doesn't seem to be software/apps causing the problem, as I first encountered it at V2.2, and it has happened with just a clean install on there as well.
    Any ideas to what could be causing this, or to a potential solution?

    This is not a bug but a problem with the software or hardware on your individual iPod. You have not mentioned try to fix it by doing a restart, reset, or a restore. These types of minor problems generally respond well to one of those remedies.
    However, if your problem doesn't go away, you may have a problem with the touch screen. If you are still under warranty, then a trip to the closest Apple store might be a good idea.

  • Ipod touch gen 1 application

    Does Apple have application for Ipod Touch Gen 1, IOS 3.1.2?

    Old Apps
    VintApps 3.1.3 for iPhone, iPod touch, and iPad on the iTunes App Store
    apps for ios 4.2.1: Apple Support Communities
    Finding iOS 4.2.1 Apps Compatible with Older Devices - Apple Club
    HT4972 Touch Game 4.2.1 Apps: Apple Support Communities
    apps for 4.2.1 (also works for 3.1.3)
    Tip - Finding 4.2.1 apps that work on an...: Apple Support Communities
    4.2.1 iPod 2nd generation unable to use any...: Apple Support Communities

  • Ipod Touch Gen 2 App Update Issue :(

    Hi,
    I have an iPod Touch gen 2, recently it has stopped updating my apps. When I click on "update," it will ask me for my password, the it'll say "waiting" with the little bar, then the icon will return to normal, but no update has taken place and the App Store icon will show the original number of updates. I have turned the wifi on and off and rebooted many times.
    If I do a restore from iTunes, do I lose all game progresses?
    Help please.

    Can you update the apps pn your computer?
    Your game progresses are part of the backup data. In order to save them before you restore, back up manually by right clicking on your device in the device list and choosing "backup". A backup without a sync process will be performed. See what else is part of the backup here: iPhone and iPod touch: About backups
    Saving data and restoreing "as new ipod" is also described here: How to back up your data and set up as a new device
    Message was edited by: Ingo2711

  • My iPod Touch Gen. 5 isn't being detected?

    I plugged in my (new, recently bought) iPod Touch Gen. 5 to my computer (I use Windows, btw), and the Music library detected it. Good. THen i went to WIndows Media PLayer and iTunes to sync music onto it but it didn't detect my iPod at all So I unplugged it and plugged it back into another USB port. Nothing changed! So I resstarted my computer, itunes, and then ipod. Nothing happened, either.
    WHat should i do? i really wanna get music onto it.

    Windows Media Play will not detect the iPod. Yo have to use iTunes for syncing.
    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

Maybe you are looking for

  • Help!!!! My Nano only loads on the F drive, not recognized by Itunes

    I have 2 ipods that have always worked with my itunes. I recently updated and have Itunes 7.0 and now my itunes won't recognize my nano. I have tried signing out of the itunes account, re-starting my computer and trying different USB ports but it sti

  • SRM: Extended Classic scenario: Request your help.

    Hi Guru's, We are implementing the EXTENDED CLASSIC SCENARIO in our project. kindly request your help. in our project the SRM box is :  G3OSBSR102. R/3 backend Box is :   RCHSBR3142. Now when i create a shopping cart it should create the Purchase ord

  • N97 Transition Effect Problem

    As you all know that the N97 user interface is not attractive due to the lack of the real transition effects, my 5800 have a nice iphone like transitions, but for the N97 the transition effect is very simple! Only some sliding menus and that’s it!! I

  • Delayed response while calling the process web service

    I have four managed servers in a cluster and the ip addresses are managed_server_1 -20.20.40.21 managed_server_2 -20.20.40.22 managed_server_3 -140.20.40.23 managed_server_4 -140.20.40.24 The admin server is on 20.20.40.21 I start the managed server

  • Response code is 401, response message is "Unauthorized"

    Hi All, When I checked Cache Monitoring I can see the below error in Mapping Runtime Cache Connection to system RUNTIME using application RUNTIME lost. Detailed information: Error accessing "http://as801spi:52400/run/value_mapping_cache/int?method=In