IPod Touch gen1 with apple composite av cable sound comes out but no video?

I have a iPod touch gen1 and ipod touch gen2 and with gen1 IPT audio comes out but no video on the tv. Whereas the gen2 works fine. I have brought the Apple Composite AV cable about 3 days ago.
Message was edited by: Italian_Stallion

Your av composite cable isnt compatible with the ipod touch 4G, i assure you that. It will work on older devices like what you have said... But ipod touch 4G is completely a high tech device in present generation. Apple cables/cables are compatible specifically to a device. Try to buy cables conpatible with iphone 4 above and i assure you it will perfectly work with an ipod touch 4G. Iphone 3gs model is inferior to 4th generation models. So maybe the cable cant function properly on higher models because its firmware, specs., etc. is more advanced.
-based on my opinion and experience only.

Similar Messages

There's a logo that pops up on my ipod touch screen with the logo Itunes and the USB cord but is unable to connecct with iTunes...what should i do?

There's a logo that pops up on my ipod touch screen with the logo Itunes and the USB cord but is unable to connecct with iTunes...what should i do?

Resolve communication issues
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build".

MY ipod Touch is Stuck & says Disabled it will not come out of that screen at all. How can I get that off so my device will work

MY ipod Touch is Stuck & says Disabled it will not come out of that screen at all. How can I get that off so my device will work

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer.

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

Ipod Touch frozen with Apple logo & loading bar below!

My laptop shutdown while my Ipod was updating software. It is frozen with the apple logo & the loading bar below. When I turned my laptop back on, it will not recognize my Ipod. This means I cannot even try restoring it. I have unplugged & plugged back in & tried holding the buttons on the Ipod for 10 seconds. I'm not sure what to do! Help please!

Try here:
iPhone and iPod touch: Frozen and unresponsive

Remote on iPod Touch crashes with Apple TV

I have a 4th Gen iPod Touch that I use just as a remote. Since I updated to the latest version of AppleTV software this week, Apple's Remote app will launch and does connect to the AppleTV (3rd Gen) but it crashes almost immediately after the first action. I have the app on an iPhone 5 as well (although its obviously a later version) and it's stable.
The Remote app version is 3.0.1 (599.20)
iOS version 6.1.6 (10B500)
AppleTV version 6.1.1 (6698.99.19)
There's plenty of space available (3.2GB) and I have tried reinstalling the app from the App Store*, and doing a hard reboot. Before I go through restoring the iPod, does anyone have any advice please?
*I do get the offer of the iOS 6 compatible version.

I think I found the answer: phantom data.
I started to get a message about the iPod being full shortly after posting my question.
In the end, I decided to wipe and restart. With only a few apps and no user data this was not too much of a chore and seems to have fixed the problem.

Ipod Touch works with APPLE and not WINDOWS

I have a first generation touch. Yesterday the PC crashed while syncing with the iTouch. After that it would not see the iPod any longer. However the APPLE I have sees it just fine. I have gone through the detailed uninstall and re install itunes process several times and tried cleaning the registry - still nothing http://support.apple.com/kb/HT1923 .
The PC based iTunes syncs with another 2G and a nano and a shuffle just fine. Windows also sees the 1G Touch..... ideas other than moving my library to my laptop? I have also reset the 1G and upgraded the software now to the latest firmware. It still works with the APPLE but not with the PC. I am sure this is a driver issue but I cannot get it fixed.

Well I happened on the answer after doing a lot of searches. Why doesn't apple post the fix on their site. This problem is due to their installation package for Vista and the fix does not require all the uninstalls and re installs you have been asked to do so many times....
THANK YOU BeeBopp
Posts: 3
From: USA
Registered: Feb 15, 2009
Re: Ipod touch is recognized as a camera
Posted: Feb 16, 2009 7:43 AM in response to: Twin195 Reply Email
This solution is very similar to one above but worked for me. Am using iPod Touch 2nd Gen with 32 bit version of Windows Vista where the iTouch is being seen by Windows but does not show in iTunes. In my case it was being identified by Windows as a camera. I tried un-installing and re-installing iTunes and all the other Apple apps with no luck. Was almost ready to throw in the towel when I did one last search for alternate solutions and found the following instructions to reinstall the drivers, but instead of having the system look to the c:\Windows\inf or c:\windows\system 32 folders for the drivers, the path is changed to C:\program files\common files\Apple\Apple Mobile Support\Drivers, which is apparently where Vista installs the drivers. Once I changed the path the driver properly reflected the iTouch as a USB device, and not a digital camera. Try this if you are having similiar issues.
Here are the steps:
1. Verify you have the following files usbaapl.cat, usbaapl.inf & usbaapl.sys in the following directory "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers"
2. Log in using an ADMINISTRATIVE account
3. Single left click on START
4. Single left click on RUN (You may need to change the start menu to 'classic view' to see RUN, you can change back after if you like)
5. Type in " devmgmt.msc " then hit Enter (Don't type in the quotes)
6. Look for Imaging in the Device Manager window, and click on plus sign (In Vista you may not see the "Imaging" option. Look under "Portable Devices" as an alternative)
7. Now you should see " Apple iPod " as a device underneath Imaging (or Portable Devices)
8. Right click on " Apple iPod " then single left click on Properties
9. Single left click on the " Driver " tab
10. Single left click on " Update driver "
11. Select " Install from a list or specific location " or "Browse my computer" whichever shows on your version of Vista
12. Single left click on " Include this location in the search " if shown
13. Paste " C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers " (Don't type in the quotes) into the box " Include this location in the search "
14. Single left click NEXT and keep clicking through until " Apple iPod USB Driver " is detected, if no list appears then you should see the little animated circle thingie spinning. It's looking and working. Be patient.
15. Hopefully you will get a successful message.
16. The correct drivers(s) are now installed.
17. Start up iTunes, and see if you iPod is detected again.
Hope this works for you as it did for me and several others.

Can iPod Touch work with Apple Watch

I plan to buy an Apple Watch , And I have iPod 5th Generation . So , I wanted to ask that can this iPod work with Apple Watch?

No, only the recent iPhones
Requires iPhone 5 or later.

IPod Touch 3G in DFU Mode and won't come out

Hello,
My daughter's iPod Touch 3G appears to be in DFU mode, but won't come out. The screen is completely black, and when I attach it to the computer, it comes up with the message "iTunes had detected as an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." When I hit the restore button, I receive the error message "software for this iPhone is not currently available. Make sure you have the latest version of iTunes and try again."
I've seen this message posted several times in the forum, and I have tried all the troubleshooting tips offered by Apple Support and in the answers to some of the questions. I am a Systems Engineer, so I consider myself pretty technically savvy. These are the steps I have followed so far:
1) Completey removed and reinstalled iTunes according to the instructions provided by Apple.
2) Downloaded the firmware for both the 3G and IOS4 from http://www.felixbruns.de/iPod/firmware/ and attempted a manual install - when I do this, I receive the error message, "the iPhone "iPhone" could not be restored because the firmware is incompatible"
3) Downloaded RecBoot to attempt to exit recovery mode, but it does not appear to be detecting the iPod.
4) Attempted to exit and re-enter DFU mode several times to no avail.
5) Called Apple Express Lane and was willing to pay the 1 time phone support charge, however the agent told me that he could not help me, and that I needed to take the iPod into an Apple store (the iPod is 190 days out of warranty).
My last effort is to try the install from another PC. So, prior to taking the iPod into the store, I was wondering if anyone has had any success other than the steps I have tried above. I'm appreciative for any assistance anyone is able to provide.
Message was edited by: kander1625

Check the model number on the back, "A1318" = 3G, "A1288" = 2G. If it truly is a 32GB 3G Touch, then you're going to have a rough time going back to an iOS version earlier than the current release (4.3.1, available from iTunes). The iOS packs you get from the site you mention are not "signed" and you probably won't be able to install them ... I think 2G owners have better luck with those "unofficial" versions.
So, if you have a 3G, your best bet is to erase (or move) all earlier iOS versions and let iTunes download a fresh copy of 4.3.1 for the iPod -- no need to go to a 3rd party site. If you have a 2G, then the latest version you can install is 4.2.1, which is also available from iTunes. To increase your odds of this working out, you might temporarily disable any AV software and firewall(s).

My 4th gen iPod touch will not work. The unlock screen comes up but dosent do anything because its is frozen. the after 5 to 10 seconds it looks like it will shut off but that also freezes. After a few seconds it goes back to the unlock screen. Help!

I dont know what to do I need help to fix this, my entire life is on that thing!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Where can i buy a new ipod touch screen with apple

My 1 year warrenty has expired and i just dropped my ipod. it still works fine its just the screen is cracked. what are some very trusted company or how much is it to get one from apple thank you

http://www.apple.com/support/ipod/service/faq/
You cna also go to an Apple Store and they should be able to replace, and most likely for free.

Why do I have no sound with Apple TV I get sound through hulu but not Netflix. Why.

I get audio on iPad through Netflix app I get audio on tv with Hulu plus. Nothing through Netflix nor airplay. How do I fix that?

if in the settings of the appletv
one choose surround rather then stereo without having a surround system connected
all is well when one play media which is not surround
but when one stumple across something which does then the stereo speakers one have connected play
front right and left and apart from action and the like most audio and talking is played out of the center speaker
which you would not have connected because you use stereo

Why won't the Apple Composite AV Cable work with ipad2?

I got the Apple Composite AV Cable for our iPad2 but it does not seem to work. The cable does not work with either our iPad2 or the iPod Touch 2G. Ironically, the cord *does* work with our ancient iPod 80GB Classic.
The iPad does not show settings for PAL or NTSC or any other settings I could possibly change to try and get the video out to work. What am I missing?
IPod Touch is set for NTSC and Widescreen has been tried both off and on with no video shown on the TV.
The videos do still show on the iPod/iPad screens while playing.

Apparently the answer is no? I guess for me this is the #1 reason to not buy an iPhone 5. I switched to the iPhone specifically for the component (RCA) cable with charging capabilities for my car audio / nav needs. Android did not have a good solution and Apple did. I am sure there are a hand full of folks who bought the Pioneer App radio who are stuck as well. Apple needs to make an airplay to component adapter or a cable for the iPhone 5. Newsflash I am not switching my head unit out for a new phone. Don’t get me wrong I love air play and own an apple TV but hotel rooms, cars, boats and points of usage not going to have air play in all instances. Even if a cable comes out the “digital” port seems telling that component is going away. Time will tell.

TS1409 What if I don't have the Apple Component AV Cable or Apple Composite AV Cable to connect my iPod to? Do I have to buy one to watch videos on my iPod?

What if I don't have the Apple Component AV Cable or Apple Composite AV Cable to connect my iPod to? Do I have to buy one to watch videos on my iPod?

Hi there,
I am assuming you have an ipod nano 6th gen (the small one with a touch screen)
unfortunately, the ipod nano 6 gen can not play videos whatsoever unless you hack it so even with a cable it does not work.
I hope this helps cus im new
(if other generation ipod nano, just reply and i will help again )

I am trying to connect my ipod classic to a tv and have tried many cables including the Apple composite AV cable. No success. Any thoughts?

I am trying to connect my ipod classic to a tv (sony bravia 1080p) and have tried many cables including the Apple composite AV cable with the 30 pin connector on one end and three RCA connectors on the other. Audio works but video does not. The ipod classic screen says to connect to device when it is already connected. No success. Any thoughts?

Hello, anabelleho.
Thank you for visiting Apple Support Communities.
Here is a troubleshooting article that I would recommend going through when experiencing this issue.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
Jason H.

IPod Touch gen1 with apple composite av cable sound comes out but no video?

Similar Messages

Maybe you are looking for