Ipod  touch has white screen and not responding

screen is white and not responding

First, try a system reset.  It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

Similar Messages

  • Ipod touch has white  screen and not responsive

    ipod touch has white screen and not responsive, pls. suggest solution

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • 3rd generation ipod touch has white screen with lines going down. Can't access anything. Any ideas?

    My 3rd generation ipod touch has white screen with lines. Can't access anything. Any ideas?

    Have you tried connecting the device to iTunes in recovery mode and restoring it? See this article for instructions on getting your iPod into recovery mode.
    iOS: Unable to update or restore
    B-rock

  • Ipod touch has white screen instead of home page, cant acess anything, any ideas?

    problem acessing Ipod touch. have white screen instead of home page

    dude your going to have to take it to apple because i can't tell if it's a hardware or software defect. your ipod might not be in warranty unless you got apple care.

  • IPod Touch had white screen and was hot

    Yesterday my iPod Touch had a white screen and was hot. I tried holding the power button and home button and it didn't work. What happened was the iPod was off. I turned it on and saw it had 30% battery and then turned off wifi. I had it on a table, and came back 10 minutes and saw it was black and wouldn't turn on. I then tried to charge it and the screen became white and was really hot in the back especially. I think it was white for like an hour. I held the iPod in front of the AC to cool it down..... ..... It cooled it down and then the iPod went black ever since today. I can't seem to do anything to it...:/ My computer & iTunes do not recognize the device.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Because of the hotness I suspect a hardware problem
    Apple Retail Store - Genius Bar       
    Apple will exchange your iPod for a refurbished one for $199 for a 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • 4th gen ipod touch has white screen

    I have a 4th generation Ipod touch. The screen turned white all of a sudden for no reason. I've tried holding buttons letting it die and plugging it back in but the white screen is still there.It still makes noise. like the other day it was making a noise like someone was calling it. Then if I press the sleep/wake button and home button it takes a picture and I can hear the noise but still have the white screen. Does anyone know what I can do? Thanks

    try one of these ways:
    > restore you iDevice with iTunes in Recovery Mode (if you have to... back up your device before restoring)
    > let the battery go completely dead.... then plug it using USB to PC or Mac OS
    > replace the LCD with www.ifixandrepair.com
    > go to the Apple Store (official store not retail) and see what they can do. they can replace your device for refurbished price

  • Avoid White Screen and (Not Responding) Message?

    Is there a way to force FrameMaker to update the screen when it becomes unresponsive during lengthy processes?
    I wrote an ExtendScript to open all files in a book (silently), import settings across all files, update the book, and then save as a PDF file. The script runs seven times, each time with different settings to control various things such as conditional text and variables.
    The problem is that FrameMaker churns on certain commands, such as opening all the files and importing the settings. During this time, it might take up to 10 minutes to complete the command across all files in the book. If I click off of FrameMaker onto another applicaiton, and then go back to FrameMaker I see only a FrameMaker container window with a white background. The title bar shows the book name and (Not Responding). The script is still running and everything is fine. But there is no feedback to the user to indicate what's happening.
    Is there no way to force FrameMaker to refresh the window and remove (Not Responding) from the title bar?
    Thanks,
    Jason

    Hi Jason,
    This is more of a limitation of FrameMaker's implementation of the "OWL" interface. The Not Responding title bar and white screen appear not just with scripts and FDK clients, but also with other long FrameMaker operations, like updating large books, etc. In fact, in Kapil Verma's FrameMaker 11 webinar yesterday, the same thing happened when he was creating a book from a ditamap.
    One way you can minimize the effect of this is to use a progress bar with your script, so people will know the progress of the script in spite of the white screen, etc.
    Rick Quatro

  • Ipod classic has white screen and do not disconnect when connected to computer and ok to disconnect when not connected to computer and stays on recognized in computer but not in itunes

    has anyone had this problem followed the steps to rest but i keep getting the same problem

    If you have your iPod set to automatically sync with iTunes, right click on the iPod in iTunes, select options and if you have a check mark in the box marked “enable disk use”, remove it and your iPod should automatically disconnect after it’s finished transferring music.

  • HELP! my ipod touch has white screen

    My ipod touch 4th gen has all of a sudden stopped working.. it went on the the black screen with the apple icon on it and then it wont turn off. i have tried to restore/restart it but it wont work and i cant get it to switch off untill the battery dies.

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Ipod touch with white screen and blue and green lines

    I have had the newest ipod touch for a year now no problems..I was just on Facebook and the screen froze then went white with a lot of blue and green colored lines on it. It won't do anything I have tried plugging it in and holding down sleep and the home button for ten seconds but I get nothing. What should I do? Will this be covered if I take it took the apple store?

    same here!!!
    my iPod Touch heats up, I've been trying to take of the case and connect it to 2 different computers but the computer don't recognize it, I tried to power it off, to do hard reset but the device not responding.
    is there a solution for this problem?
    iPod touch 4th, iOS 5.0.1
    here is a image of my device's screen.

  • 6th gen ipod nano has white screen and won't go into disc mode

    My ipod nano has a white screen - it will play music, and it is recognized by itunes. It won't enter disc mode. I can't seem to find any other helpful steps to follow online other than put it into disc mode and restore it via itunes. When I attempt to put it into disc mode holding power/Vol down together the screen will turn back, but when I then hold down Vol down/Vol up together while the screen is dark it just goes back to white screen. I did plug it into the computer and restore it via itunes, and the screen is still white.  Any ideas?  Thanks!

    Hi LizS5,
    It sounds as if you have already done much of the troubleshooting suggested in this article, but I would suggest you work through it in order to get your iPod nano back up and running -
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Specifically -
    Try putting the iPod into disk mode:
    Reset the device (press the Sleep and Volume Down buttons simultaneously until the display turns black—about eight seconds).
    When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk mode.
    While the device is in disk mode, sync it to iTunes and try to restore.
    And if the issue is not resolved -
    My issue is still not resolved. What do I do next?
    For information on servicing your iPod, go to the iPod Service FAQ
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Ipod Touch Flashes white screen and wont connect to computer

    hi i recently got a ipod touch from craigslist and cant return it. It flashes a white screen when plugged into the computer and occasionally shows the apple logo. it cant connect to the usb or itunes  and ive tried  almost everything but it wont connect. i cant go to the genuis bar because its about a hour or more away i have little money and i dont drive please help me . And thank you for your time.

    Error 1600, 1601, 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    http://support.apple.com/kb/TS3694#error1601

  • Ipod touch has white screen

    Have tried to restore twice and have held the two buttons down for 30 seconds... no fix... it is charged and it has not been dropped or had any liquids on it... any help is appreciated...

    You may have a major disconnection, defective Liquid Crystals, or, less likely, an operating system error. You will have to talk to Apple.

  • My sons ipod locked up and now has a solid white screen and wont respond to anything

    My sons ipod was working fine then the screen locked up wouldn't allow any use tried to turn it off now it has a solid white screen and wont respond to anything.  Any ideas what i can do

    Let the battery drain.

  • Imac has white screen and spinning wheel and will not boot up---after lion install

    imac has white screen and spinning wheel and will not boot up---after lion install

    Please read Gray screen appears during startup.

Maybe you are looking for

  • Error while calling web service for first time

    Hello  I am calling a third party  web service using BasicHttp adapter and passing user name and password  in send port security tab by setting security mode to "Transport" and Transport client credential type" as Basic. every time when i redeploy or

  • "Save A Copy As"... graphic glitch in Audio pathway?

    Here's the situation... When I'm done with a song, I archive it to an external hard drive. By utilizing "Save A Copy As". I can copy the Logic song, all associated audio files, EXS instruments and samples used, etc... to this external drive. I then l

  • Traffic shaping for the Mac

    Some routers offer a traffic shaping option to keep uploads from slowing down downloads on asynchronus connections. The Airport Express doesn't? Any software to do it on the Mac?

  • Extending a Java Object in JavaFX

    Hi all, Im a JavaFX newbie and couldnt find an answer to my question through google or this forum. The problem seems to be really trivial though: I have the following class in java: public abstract class Car {    long wheels;    public Car(long numWh

  • Blackberry curve 9300 please help

    Hi ive got a 9300 curve and my bbm was working perfectly.i was prompted to do a version update yesterday.once i did the update my bbm does not work proparly.it keeps on hanging and the scroller doesnt move when it should etc.is there any way i could