IPod touch in recovery mode and isn't recognized by iTunes
Reply please.
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
I have had to put my ipod touch in Recovery Mode and tried to sync it with itunes but it wont restore itself. What can I do?
http://support.apple.com/kb/TS3694#error3194
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
Ipod stuck in recovery mode and isn't recognize by computer...Help!
After the latest update my daughters ipod went into recovery mode...was getting ready to do the full factory reset and had an error....found that I needed to update itunes..did that and now my computer won't recognize her ipod at all! Her ipod is currently stuck in recovery mode and she is in tears. Someone please help.
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/ -
I dont know what to do . Like.. Am i supposeto put it in "disk mode?" idk how to . What is the pause and play botton on an ipod touch... ??
What happens when you try to restore via iTunes? Error message?
-
Brand New iPod Touch - It's stuck and not being recognized by iTunes
I just got a new iPod Touch for a gift. I plugged it in and it needed to update software to 4.0. I allowed it to download and install and left the computer alone. Came back and it is currently stuck showing the screen with the USB and the iTunes symbol. It is no longer recognized on iTunes when I plug it in. I cannot get it off this screen, I would do a restore but iTunes does not recognize this. When I plug the iPod touch in, it shows up in device manager as Apple Mobile Device (Recovery Mode) (2 of them). I am able to install the drivers on one and the other it will not let me and gives me a code 10. This is very frustrating especially since I have owned it less than 5 hours.
PLEASE HELP I HAVE SEARCHED FOR HOURS NOTHING WORKS!!!Try Updating Itunes to the latest version
-
My ipod won't turn on and isn't recognized by iTunes or computer
My iPod Touch (2nd Generation) won't turn on at all. I tried charging it with different cables and in different outlets and it wouldn't charge. My computer (a mac) and iTunes won't recognize it and the sleep button is jammed so I can't restart it. What should I do?
Need more info to help, assuming that the iPod screen is totally blank now, when you switch it on.
When you plug it in to charge, what do you see on the iPod screen, after 30 minutes, while still connected?
Have you tried using another USB cable or port? -
My ipod is in 'recovery mode' and I've tried to recommended process to fix it but it won't complete the process. In the meantime, my ipod Nano is not working with my Menu screen or music, what to do about this??
Hi Newf51,
Is this an iPod Touch that is stuck in recovery mode? What happens when you try to restore it to factory settings through iTunes? If it gives an error, go through this article to try to resolve the issue Resolve iOS update and restore errors - Apple Support -
IOS 5 update forced ipod touch into recovery mode which I can't get it out of! Help please!
Hi, I recently updated my ipod touch 3rd gen to ios5 (as prompted by itunes - assumed a standard software update). Immediately afterwards, my ipod went into recovery mode, and initially itunes recognised this and tried to restore it unsuccessfully. Not any more! Now it is either off, or displays the 'connect to itunes' logo when I connect it to the computer via USB lead.
I've tried uninstalling and re-installing itunes but this hasn't helped it recognise the ipod.
I don't think I've managed to go 3 months without having to do something like reinstall the drivers etc on this ipod, don't know why i expected this update to be any different!
Can anyone help?
Thanks in advance!Try disabling all security software and firewalls, then try again.
Or try from a different computer.
This error is a pain in the butt and a new issue, too. I'm sorry. -
Restore iPod touch from recovery mode.
When trying to restore my iPod touch from recovery mode I get the following message: The “iPod” could not be restored. This device isn’t eligible for the requested build." I have tried the recommended solution by apple but still no good. Help any one?
See:
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
How to Fix iTunes Error 3194?
How to solve iTunes error 3194 in 10 simple steps
try on another computer -
I restored my ipod touch but when i connect it with itunes it hkeeps saying that my ipod is on recovery mode and have to restore it again. What should i do?
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My ipod is in recovery mode and will not do anything
my ipod is in recovery mode and will not let me do anything i have tryed to reinstall but still nothing
Just what happens when you connect it to your computer and restore via iTunes?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Ipod stuck in recovery mode and wont restore
ipod stuck in recovery mode and wont restore.Also not reconized in itunes anylonger.When I check my usb in device manager says in recovery mode!
Using PC with windows 7 64bit! Tried DFU mode but it boots back showing a usb,plus an itunes icon on the screen!- Reboot the computer
- Try another USB port and cable
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
iPod is in Recovery Mode and when I Try to connect my itouch it says it cannot connect because it is locked with a password, but I cannot unlock it since it is in recovery mode! Help!! Pleaseee
Try putting it in DFU mode and then restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I forgot my password and am trying to reset my ipod, but it won't work.It says that my ipod is in recovery mode and that I must restore it. I click ok, and then click on restore and update. Then it says connecting ipod software update server and a screen pops up with ipod software update on the top and iOS 5.1. It lists a bunch of stuff this update contains and on the bottom it says next, which I click and nothing happens, it just goes back to the ipod restore page. Help, what am I doing wrong?
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw. -
when i turn on my itouch the screen tells me to plug into itunes, i do that and it tells me my ipod is in recovery mode and to restore it, i click ok and click restore then it does it all over again and nothing happens. what do i do?
Hi tgoit2015,
If you are having issues restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden
Maybe you are looking for
-
How do I use an array variable in the assignment target?
Hi, I am creating a BPEL process in which I have to use an array variable. The array variable needs to be initialized based on some condition. The issue is I cannot find a way to set the value of the array variable. There are ways to GET the value of
-
How can I use any website on the internet with my apple tv?
How Can I use internet or the web on my apple tv?
-
Is there a an easy way to add a video to a master page? Thanks
-
every time I try to insert an image of any size or format I get this: while executing object tag in image.htm, the following javascript error(s) occurred: at line 31 of C:\programfiles\macromedia\dreamweaver mx2004\configuration\objects\common\Image.
-
I dont have my old number anymore and iMessage is still registered on the old number(it's in light grey fonts)I cannot choose or delete this number. Also I cannot recieve text on this number because it doesnt exist anymore.