IPOD Touch/iPHONE Connection with Linksys WRT160N V2

Been trying to connect to my wireless modem with the new iPOD touch and iPhone at home but will not recognize my pwd.  Went to apple website for setup and did everything per instruction to join network with failed result.  However, my iPhone works fine with my 3G network cell phone provider.   I have a WRT160N V2 router connected off an ARIS comcast cable modem. 
Anyone had this issue?  How did you resolve this?
Please help....
Thanks.
ailao

I'm using the same router as yours and my iPhone connects perfectly fine.
All I did was:
1. Change the SSID of the router from "linksys" to a different name.
2. Changed the channel.
3. Configured WPA2 wireless security.
4. On the iPhone I just typed in the password (which is the WPA2 key) and it's connected.
If you need more detailed steps on how to configure your wireless network, click here

Similar Messages

  • Why can't I get my iPod touch to connect with my wifi?

    I am unable to get my iPod touch to connect to my wifi even though I've verified the password is correct.   Can anyone help?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Ipod touch shows connection with home computer but can't access internet

    Just got ipod touch...and can't connect to internet on home computer.  Wifi is on and it shows connection to my home computer but I can access the internet.

    What iP address is shown on the iPod for network connection?  If it starts with 169 you are not connected to the network, the 169 IP is assigned by the iPod and not obtained form the router.
    I would try:
    - powering off and then back on yur router.
    - Reseting network settings on the iPod: Settings>General>Reset>Reset Network Settings.
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • Ipod touch wont connect with wiffi?

    I just got my friends old ipod touch. i dont know the generation of it but it doesnt have a crama.
    when i get to the settings it says no wiffi what do i do?

    What is the model number on the back
    It should have letters and numbers
    For example: A1367
    Make sure not to get it mixed with your serial number

  • IPOD TOUCH NOT WORKING WITH ITUNES

    I am using:
    iPod Touch 16GB 1.1.4 (With $25 Software Upgrade)
    Windows Vista Premium Edition
    iTunes 7.6.2
    Whenever I connect my iPod, the device connect sound is made and it shows up in the my computer window, but it will not show up or sync with iTunes.
    I HAVE ALREADY TRIED THE FOLLOWING:
    Reseting the computer
    Reseting the iPod
    Using a different USB port
    Using a different cable
    Erasing ALL of the iPod's contents (Yes I lost my $25 update as well)
    Restarting the "APPLE MOBILE DEVICE SUPPORT" in the "systems" application
    ...As well as many other things, all with absolutely NO results.
    I have tried to manage my ipod through other programs, nothing seems to work. I connected the iPod to a different computer and everything worked fine.
    I ASSUME the problem has something to do with the iPod Touch's drivers; for whatever reason they might be corrupted or installed incorrectly, thus preventing the iPod from automatically reinstalling them as well as preventing the possibility of syncing.
    My question is, how can I reinstall the drivers without having the iPod touch do it automatically?
    Any help would be much appreciated, thanks.

    I fixed the problem myself.
    If anyone else has this same problem and is looking to fix it, here is what I did.
    I found this on another site:
    "Okay well I spent about an hour on the phone with Apple trying to fix this problem. The guy I talked to seemed to have delt with this problem before. He tould me that Apple was getting numerous calls about the iPod touch not connecting with iTunes. So here is the solution that worked for me.
    The first thing you must do it uninstall iTunes and Quicktime using the controll pannel, add/remove hardware, on your windows computer. Once you have uninstalled both of thoes programes go ahead and look for anything else that is Apple and uninstall them as well. There should be an Apple updater or driver that is very critical to uninstall, this was the cause of iTunes not recognizing the new iPod Touch. Next make shure you have the very latest update for Windows on your computer, you can check this on Microsofts web page. Finnaly once you are shure you have UNINSTALLED EVERYTHING that says Apple, iTunes, or Quick time restart your computer and MAKE SHURE THAT YOUR IPOD IS NOT CONNECTED TO YOUR COMPUTER. Then download the newest version of iTunes and install it. Once the installation is complete go ahead and connect the iPod Touch and everything should work.
    I am not shure if this will work for everyone but in my situation it worked. I hope it helps some of you out there!!"
    That worked like a ******* charm. Hope this helps.

  • HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    Hmm.. Thank you for the response.
    Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
    Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!

    I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!

    RESET YOUR ROUTER
    No. Reset your router.

  • I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB.  How can I get my computer to recognize my ipod

    I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB.  How can I get my computer to recognize my ipod

    iPod not recognized in 'My Computer' and in iTunes for Windows

  • Ipod touch / iphone / ipod nano won't connect to iTunes (not recognized)

    Up until yesterday everything was working fine. But now when I connect my ipod touch, iphons (1st), or ipod nano to iTunes, my PC recognizes them (show up in Windows Explorer), but iTunes does not recognize them anymore.
    I don't know what changed.
    I have reset all devices.
    I have completely removed and reinstalled iTunes. (I've tried iTunes 10.5.1 and 10.5.2)
    I have shut down and rebooted the PC (several times).
    I have tried different USB ports and different cables.
    My Windows 7x64 is fully updated.
    Does anyone know how to help?

    Sorry, I followed both guides and uninstalled everything - rebooted, reinstalled iTunes like your second link instructions said.
    PC sees all devices fine in Windows Explorer (and makes the pling sound when I connect them, they just do not show up in iTunes.
    (ipod nano, ipod touch 32GB, iphone 1st gen, ipad 1st gen)
    Manually starting or restarting all itunes/ipod related services doesn't do a thing either, nothing will sync.
    I'm at a loss.

  • Creating iPod touch/iPhone web sites with iWeb

    I have a web site created with iWeb, i was woundering if it's possible to create a web site specifically for the iPod touch/iPhone platform . Or is there some tamplates in iWeb for creating iPhone/iPod touch web sites ?

    Here's a site I created with the iPad in mind.
    http://ipad.dailynews.webege.com/
    I used a template from iWork's Pages.
    Then I made a page setup for the width and height of the iPad screen : 1024x768 or rather 768x1024.
    The paper size = 28,40 x 34,50 cm. The papersize is slightly larger because I had a background in mind but changed that later.
    The display percentage is 100% so it will look the same as in iWeb.
    I copy/pasted the objects from Pages to iWeb.
    Then used the iPad simulator to view it. Hopefully it's the same with a real iPad.
    See if you accomplish the same for the iPhone/iPod touch.

  • IPod Touch cannot connect to wireless network

    I have a 1 TB, dual-band time capsule with a wireless network created to share our broadband internet connection for our main computer (the iMac), a windows PC, an iPhone 3G, and a 2nd gen iPod touch to connect to the internet. Wireless security for this network is WPA/WPA2 Personal. The windows box and the iPhone 3G connect without problem, but the iPod touch does not seem to connect correctly. The device sees the network, prompts for the password, and seems to be connected (wi-fi symbol visible in top left corner of device), but when trying to view a website using the Safari app, the screen dims and an endless "Connecting..." message is visible. Furthermore, when trying to update e-mail, I get a message that the connection to the server failed.
    It is worth noting that the iPod did not always have this problem. It was able to connect to the wi-fi network until a few weeks ago. This may have been due to the upgrade to Snow Leopard, or perhaps due to an incident where the windows PC lost its connection to the network. When this occurred, I had to disable all security on the network, connect the PC to the network, then re-enable security (as I had to do when first installing the Time Capsule; for whatever reason, the windows box had a hard time joining the network with security enabled). Anyway, one of these two events is the likely cause of the iPod suddenly being unable to connect; I'm sorry to say that I'm uncertain as to which one, because my wife uses the device sporadically, so we cannot pinpoint exactly when this difficulty started.
    As for attempted solutions, I tried resetting the iPod back to factory settings, only to have the same connection issues. I also changed the network security settings to None, and attempted to connect the iPod to the network (even though it should have no problem connecting to a secure network), but still no go. I am short on ideas for a fix, and would gladly welcome any advice the community has to offer. Thank you in advance for your assistance.

    Pretty much the same thing happened to me. My new Touch connects fine to my work wireless network (WEP64) - still does. But my home wireless network is SOL. I can join the router, wireless icon is in upper left corner (although gray, not green). I can even see the Touch from my router (Verizon FIOS). All other laptops in the house including wireless TiVo work flawlessly. I have not undone my security on my router yet - looks like it won't help. I have tried using static IP and I can still see iPod from router. But I cannot browse, go to AppStore, check email (which works great from work network), and have exact same error messages as above post. It has to be a security thing somewhere, I just didn't want to mess with router if I didn't have to. If I figure it out, I will post here........

  • IPOD TOUCH NOT CONNECTING TO ITUNES SOLUTION !!!!!!

    Hi all,
    like a lot of us on here I got an ipod touch for xmas, yet when I connected it to my new laptop which runs vista itunes would not find my ipod touch although the laptop found it as a camera. My old laptop that runs xp however had no such problem and my ipod touch connected to it and itunes without a problem so I knew the problem wasn't with my touch. After trying different things for about a month today I came across this solution it worked for me and I hope it works for you.
    The problem is that windows is using its own microsoft driver for the ipod touch rather than the apple one. This is how I changed my driver for the apple one and jumped with joy as I heard my touch beep and finally show up in itunes.
    PLEASE REMEMBER THESE INSTRUCTIONS ARE FOR VISTA BUT SHOULD BE MORE OR LESS THE SAME ON XP.
    1. Click on the windows/start button and goto control pannel
    2. Once in control pannel click classic view if you are not already on it
    3. Then from the control pannel options click on Device Manager
    4. Device Manager will open with a list of devices
    5. look down the list and you should see one called mobile devices click the
    plus sign next to it and apple ipod should show up under it.
    6. Click on apple ipod and a box will pop up click on the driver tab at the top
    of this box & then click update driver from within this box.
    7. A new box will open with two options, choose the second one entitled
    "browse my computer for driver software"
    8. Another new box will pop up and in the box under "search for driver
    software in this location" type c:/ (asuming drive c is your main harddrive)
    or use the browse button next to this box to locate your harddrive.
    9. Now simply click next and fingers crossed if your computer is like mine it
    should search your harddrive find the apple driver, install it and you
    should hear your ipod beep as its recognised by itunes.
    Like I say it worked for me I hope it works for you.
    GOOD LUCK !!!

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                                              
    and
    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • HT203175 I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggesti

    I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggestions?

    In the course of your troubleshooting to date, have you worked through the following document?
    iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device

  • I did every step including reinstall intunes to get my IPod touch to sych with intunes and not show up as a camera and nothing works. I even updated the device drivers. Genius bar at apple store told me the ipod was fine, the problem was my intunes. Help

    I did every step including reinstall intunes to get my IPod touch to sych with Itunes but it fail to recognize it as anything other than a camera. It still recognize my Ishuffle as a device. The Genius bar as an Apple store told me the Ipod worked on their Apple PC, my pc is not an apple, I attemped every step to rectify the situation including updating the device drivers. I wonder if I need to eliminate every old residue with the word Apple in it on my computer to get it up and going again. Please help !

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My iPod touch wont Connect or Slide

    My iPod screen says Connect to iTunes, but it wont connect, and I've tried to "Hard Reset" it, but it just goes right back to the same screen. also when i try to turn it off it wont let me slide to turn it off? Please help!! i've had my iPod for quite awhile and this is the first problem i've ever had with it.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • ORA-08006: specified row no longer exists

    Hi All, We are using OWB tool to execute mappings(Package) and while executing it i go the error "ORA-08006: specified row no longer exists". I know that this is not the OWB Forum, but the concept is related to SQL/PLSQL. So a Mapping is nothing but

  • How to create a people picker type metadata in a document set?

     Hi folks, I want to create a people picker type metadata in a document set (it has some content types and it resides inside a library). So please help me knowing steps for creating it.  Our web application is using classic based authentication ther

  • I movie wont export????

    I have a brand new mac book pro when I try to export a video my export option is not available??? Do I have to register I life ?any help please

  • Failed in testing bankapp sample ( Pro*C ver)

    Hello. A few days ago, I got the bankapp sample Pro*C version from OTN site. According to README, I succeded to make TM, compile code, build the tables in Oracle 10g, make tuxconfig using ubbshm and finally I started the process successfuly using tmb

  • PDF-forms on non-businesscatalyst provider sites

    I have embedded a PDF-form (a fillable order form with a button to e-mail the completed form) in my webite (I'm testing it at akanthus.businesscatalyst.com). It works fine on the businesscatalyst site, but ultimately I will upload the site to an exte