Ipod touch is flashing apple sign and not able to open.
I clicked on an app and then screen locked up into a flashing apple and I am not able to fix it. Does anyone know how to fix this problem.
thanks, Liz811
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
I set up my sons ipod touch with my apple id and he is getting text messages from my iphone
I set up my son's ipod touch with my apple id and he is getting text messages from my Iphone. How can I set up Imessage from his email account instead of my email/phone #?
You can go to Settings>Messages>Send and Receive and uncheck the phone number and delete your email address. You can add his own email address. The only way to delete the phone number is to use an Apple ID for Messages that is not associated with an iPhone. You can change it by Go to Settings>Messages>Apple ID and sign out and sign in with the other ID
-
i have selected the Erase all contents and settings option in my ipod touch 4. till then i was not able to turn it on and even it was not detectable on itunes. what should i do now?
I am confused. You said till you Erases all contents and setting yu could not turn it and iTunes did not see it. How could you Erase all Contents and Setting if you could not turn it on?
-
I synced my daughters ipod touch with my apple account and now all of her contacts are on my iphone and my contacts are gone. What happened???
Try settings -- messages -- send & recieve and see if your email and phone number are in there and if there is only a check mark next to your email address. If so just check off your phone number and try that.
-
Problem with my Ipod 4...always hanging and not able to surf anything ???what should I do??
- If Safari is having problems, go to Settings>Safari and delete cookies, history and cache
- Also try the following one at a time:
- Reset. Nothing will be lost
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod. -
Mac got really slow after updation of os X and some application misbehaving and not able to open them.
Apply the combo update
http://support.apple.com/kb/DL1640 -
i have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any suggestions?
This problem has been reported a few times. The solution is to install any new App say a free one. This seems to fix whatever has gone wrong.
-
I downloaded Cydia a couple of days ago, now my Ipod touch keeps flashing the apple logo.
Try the remaining items here:
iOS: Not responding or does not turn on
If not successful and you can't turn the iPod completely off let the battery fully drain. After charging for at least of hour try again.
If still not successful then time for an appointment at the Genius Bar of an Apple store. -
I have two Apple TV's one in my living room and one in our bedroom. I purchased a movie series on the tv in the living room but was not able to open on the tv in the bedroom. I am using the same account for both Apple TV's. Can anyone assist?
Wecome to the Apple Community.
For the avoidance of doubt, are you able to play the TV show on the Apple TV on which you bought it and it is a TV show and not a movie is it.
What do you mean can't open it, what exactly happens. -
I am not able to open my ipad when forgot password and made several attempts to open it .The message " iPAD is disabled..Connect to itunes" appers.It is not opening even after i changed the password.Need support.
Try and force iPad into Recovery Mode:
1. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
2. Connect USB cable to computer, leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
Recover tablespace is failing and not able to open database
Hello All,
I am using Oracle RAC 11g R2 on Linux. My database is running in NOARHIVELOG mode.
I am testing some RMAN scenarios.
After doing a the below scenario: I think the problem that I used switch log file!!!
RMAN> backup tablespace 'USERS' TAG 'TestBkp_FRA';
RMAN> backup backupset 10 format '/testasm/backup%U' delete input; -- here 10 is the backup set generated in the previous command
RMAN> BACKUP INCREMENTAL LEVEL 1 tablespace users;
alter system switch logfile;-- many times i am not able to recover my users tablespace because of the below :
archived log for thread 1 with sequence 19 is already on disk as file +DATA/orcl/onlinelog/group_1.261.772044543
archived log for thread 1 with sequence 20 is already on disk as file +DATA/orcl/onlinelog/group_2.262.772044547
archived log for thread 2 with sequence 4 is already on disk as file +DATA/orcl/onlinelog/group_4.266.772044919
RMAN-08187: WARNING: media recovery until SCN 1101381 complete
Finished recover at 27-MAR-2012 17:21:36and I am unable to open my database:
RMAN> alter database open;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 03/27/2012 17:26:18
ORA-01113: file 4 needs media recovery
ORA-01110: data file 4: '+DATA/orcl/datafile/users.259.772044111'below is a list of my backups
RMAN> list backup;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
9 Full 1.45M DISK 00:00:02 27-MAR-2012 12:06:47
BP Key: 11 Status: AVAILABLE Compressed: NO Tag: TESTBKP
Piece Name: /testasm/backup0an6tvil_1_2
List of Datafiles in backup set 9
File LV Type Ckp SCN Ckp Time Name
4 Full 1092418 27-MAR-2012 11:40:06 +DATA/orcl/datafile/users.259.772044111
BS Key Type LV Size Device Type Elapsed Time Completion Time
10 Full 1.45M DISK 00:00:04 27-MAR-2012 15:58:54
BP Key: 13 Status: AVAILABLE Compressed: NO Tag: TESTBKP_FRA
Piece Name: /testasm/backup0bn6ud5q_1_2
List of Datafiles in backup set 10
File LV Type Ckp SCN Ckp Time Name
4 Full 1100603 27-MAR-2012 15:53:40 +DATA/orcl/datafile/users.259.772044111
BS Key Type LV Size Device Type Elapsed Time Completion Time
11 Incr 0 1.45M DISK 00:00:05 27-MAR-2012 16:16:59
BP Key: 14 Status: AVAILABLE Compressed: NO Tag: TAG20120327T161652
Piece Name: +FRA/orcl/backupset/2012_03_27/nnndn0_tag20120327t161652_0.261.779041015
List of Datafiles in backup set 11
File LV Type Ckp SCN Ckp Time Name
4 0 Incr 1101381 27-MAR-2012 16:13:11 +DATA/orcl/datafile/users.259.772044111
BS Key Type LV Size Device Type Elapsed Time Completion Time
12 Full 1.45M DISK 00:00:02 27-MAR-2012 17:00:26
BP Key: 15 Status: AVAILABLE Compressed: NO Tag: TAG20120327T170023
Piece Name: +FRA/orcl/backupset/2012_03_27/nnndf0_tag20120327t170023_0.260.779043625
List of Datafiles in backup set 12
File LV Type Ckp SCN Ckp Time Name
4 Full 1101381 27-MAR-2012 16:13:11 +DATA/orcl/datafile/users.259.772044111My database is running in NOARCHIVELOG mode I have no Full database backup.
How can I start my database. Please help!!NB wrote:
What do you mean ?
Now I am not able to open my database. it is mounted.
What steps should i do ?If you try to backup database in NOARCHIVELOG mode, you will get below errors
RMAN> backup database;
Starting backup at 27-MAR-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=130 device type=DISK
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 03/27/2012 20:30:26
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
RMAN>
RMAN> backup tablespace users;
Starting backup at 27-MAR-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 03/27/2012 20:30:58
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
RMAN>Can you tell me how you took backup? have you taken backup from MOUNT status when its in noarchivelog mode?
If there is inconsistency of SCN, you cant recover it.
Please describe how you took backup & why you want to perform recovery in noarchivelog mode? -
So I have had this problem before, and know that you hold down the top Power button and the Home button, at the same time, for roughly 10 seconds, or until the apple logo comes on.
The problem is, when I press the buttons and the screen goes black, like it's supposed to before the logo pops up, the apple logo isn't appearing.
I was wondering if that's because my I pod touch was drained when I plugged it in to charge, and I tried to turn it on when it was still charging?
What can I do?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I did every step including reinstall intunes to get my IPod touch to sych with Itunes but it fail to recognize it as anything other than a camera. It still recognize my Ishuffle as a device. The Genius bar as an Apple store told me the Ipod worked on their Apple PC, my pc is not an apple, I attemped every step to rectify the situation including updating the device drivers. I wonder if I need to eliminate every old residue with the word Apple in it on my computer to get it up and going again. Please help !
If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My IPOD Touch 3G is frozen on the apple logo. It will allow me to reset it. The computer no longer will recognize it. I have tried on several Macs and it seems as though the problem is with the IPOD and not the computer since none of my MACs will recognize it.
You can try to put it on Recovery mode then restore it..
Press or Hold the power and home keys 10 seconds.
Screen goes black, now release the power button
Make sure you do not release the Home key until
your iTunes says "We have detected an itouch
in recovery mode."
After this its simple all you
got to do is a simple restore using your iTunes -
Ipod Touch has the logo sign and wont turn on
Hello,
My ipod touch is giving me problems. It had low battery today and suddenly just out of nowhere turned off. I plugged in for charging however it appears that the logo sign is only on and doesnt do anything else. Could anyone please tell me a solution for this. I have already tried holding the power button as well as the home for several seconds but nothing seems to work. Any help on this would be greatly appreciated. ThanksFirst, charge it up and try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.
Maybe you are looking for
-
MacBook Pro won't boot from recovery disc
Hi, I've got an early 1998 15" MacBook Pro that came with Leopard I think, but I've upgraded along the way and was running Mountain Lion when trouble started. A few months ago it started randomly crashing and restarting, then progressed to not starti
-
Hi, I've created a Spring based POJO service which consists of an interface and it's implementation - e.g. TrialService and TrialServiceImpl. I created a data control from TrialServiceImpl.java - so far so good. In the DataControls.dcx, I amended Fac
-
when i try to put the computer to sleep it goes to sleep but immediately turns back on
-
Hi How to assign both internal & external no ranges for vendor no range. Regards Ram
-
FB60 making 'Bus.place/sectn' as Mandatory Filed
Hii In T-Code FB60, i hav a requirement to make 'Bus.place/sectn' field as Mandatory Field... How can i achieve it ?? will igo for validation or in program itself i hav to change it ? Thanks in Advance Satya