IPod touch keeps changing the date, time, and timezone on its own

Yesterday I noticed that the iPod was showing the wrong date, so I fixed it. I also checked the computer I was syncing to, but it had the correct date, time, etc. Now when I woke up the iPod today, the time, date, and timezone had all been changed again. Has anybody else had this problem, or know what I need to do to stop it? Thanks!

When you sync the iPod, you have to sync it with a "new" iTunes window.
Before you connect the iPod, exit out of iTunes, then reload it, and finally connect your iPod to it.
I believe there was a software update that fixed this...

Similar Messages

  • Why does my iPod Touch keep changing the date and year?

    Whenever I charge my iPod Touch after it completely dies, Safari never loads whatever site I'm trying to go on and the date always goes to Thursday, January 1st, 1970. I noticed the time always changes as well. i.e. it's 10:47am now and the time on the iPod says 5:35am. I don't know how or why it keeps doing this. I didn't mind it the first 2 times, but this keeps happening everytime I turn it on. Does anyone else's do this??

    Hi eskimoerin,
    reset & software update could fix the problem.
    Don't forget to backup your data from iPod.

  • My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays .

    My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays thru my radio and system.

    That message is usually due to a bad cable.
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    If you can’t charge your iPhone, iPad, or iPod touch
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    or send it in to Apple. See:     
    Service Answer Center - iPod

  • My ipod touch keeps flashing the logo and will not turn on nor does the computer recognizes it.

    I downloaded Cydia a couple of days ago, now my Ipod touch keeps flashing the apple logo.

    Try the remaining items here:
    iOS: Not responding or does not turn on
    If not successful and you can't turn the iPod completely off let the battery fully drain. After charging for at least of hour try again.
    If still not successful then time for an appointment at the Genius Bar of an Apple store.

  • I just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english? ps: i'm hopeless.

    i just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english?
    ps: i'm hopeless.

    So what you want is for it to say Lebanon (English)?  If so, see if this helps:
    http://m10lmac.blogspot.com/2012/05/fixing-custom-english-region-settings.html

  • Ipod touch keeps changing new album artwork

    Ive been trying to figure out why my ipod touch keeps changing my new album/songs artwork and i cant figure it out. I deleted the artwork then readded it and it didnt work. Deleted the itunes cache and that didnt work. Im so close to saying for it get it. Any suggestions?

    That happens sometimes
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • IPod touch keeps changing playlist order.

    My iPod touch keeps rearranging the order of my podcast play list. I have them arranged by composer (i placed the release date in the composer slot) and sort them from oldest to newest. This never happens on either my 30gig video or 80gig classic, just my 32gig touch. I turned off shake to shuffle and the shuffle icon is not highlighted. Is there any way to keep this from happening?

    I have the same problem with all of my playlists. It is a problem for my playlists designed for my workouts as they are arranged by beats per minute. I have also tried to turn off the the shake to shuffle but it didn't work. If anyone has a solution, please help!!

  • There's a logo that pops up on my ipod touch screen with the logo Itunes and the USB cord but is unable to connecct with iTunes...what should i do?

    There's a logo that pops up on my ipod touch screen with the logo Itunes and the USB cord but is unable to connecct with iTunes...what should i do?

    Resolve communication issues
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build".

  • Can not update or restore my ipod touch, keep getting the error message 13019

    can not update or restore my ipod touch, keep getting the error message 13019

    Start here:
    iTunes: Error 13019 during sync

  • How do I reinstall an older version of the software on my IPod touch?  Installed the latest update and now it no longer works in my car

    How do I reinstall an older version of the software on my IPod touch?  Installed the latest update and now it no longer works in my car.

    I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
    You may leave comments at Apple Feedback.

  • How do I change the date/time of a dll created in LabVIEW without killing it

    I use the LabVIEW (6.0.2 of course) Application builder to create a dll, and I cannot enter creation information, nor can I modify the date time property, which labVIEW does not properly set. I have tried to modify this information in Visual C++, but that destroys the dll because it wasn't compiled in VC++, and therefore isn't compatible.
    If anyone knows how to correctly modify the date/time (and the checksum) without destroying the dll, I would be gratefull to know.
    Thank you

    Dear Sir,
    I was browsing through MSDN in trying to find the info you are looking for and I step into this next file:
    "Peering Inside the PE: A Tour of the Win32 Portable Executable File Format"
    Which you can locate in the msdn.microsoft.com page by going to the search box and typing that title. The first result is that document. Also you may want to check the "imagehlp" file of the msdn library. This documents provides information on the DLL standard and functions.
    Good luck!...
    Nestor Sanchez
    Applications Engineer
    National Instruments
    Nestor
    National Instruments

  • Hi guys , when I tap a song on my iPod touch it plays the wrong song and sometimes it comes up with the now playing screen but no matter how many times I press play it doesn't play ,what's wrong with my ipod

    When I play a song on my iPod it immediately skips a song and sometimes doesn't play any song at all

    - Try a reset. It cvures many ills.
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync and then resync the music
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • The genius mixes on my macbook pro do not match those on my iPod touched, I've synced many times and they are still different, how do I get the mixes from my laptop to my iPod??

    I cannot get the genius mixes on my laptop to match those on my ipod touch no matter how many time I sync.
    I'd love to be able to update the genius mixes on my ipod as they are quite old now.
    Any idea what I am doing wrong?
    All advice is appreciated !!
    Thanks,
    Nat

    alex5423 wrote: 
    Is the setting to prevent deletion of the copy on the comcast server: preferences, accounts, and then uncheck "remove copy from server after receiving message"??
    That should work.
    You'd just have to forward the messages manually, one by one, as far as I know (there may be a way to script it but I'm not too keen on AppleScript).
    Clinton

  • How many Multi-Touch points can an iPhone/iPod touch have at the same time?

    How many Multi-Touch points can an iPhone/iPod touch/iPad have at the same time?
    I am curious as IIRC (but forgot where the article is on the Internet),
    if a touch surface is wanted to be able to detect more than 1 touch point at the same time,
    then that touch surface needs adding 1 more conductive(?) layer.
    (e.g. 2 points -> 2 layers, and so on)
    So I wonder how many these layers are on the iPhone / iPod touch / iPad or even the trackpad on every MacBook (Pro).
    (correct me if I'm wrong)
    Just curious, thanks in advance!

    I believe it can only support 2. This article explains how the touch screen works but doesn't explicitly say how many points is supports.
    http://electronics.howstuffworks.com/iphone1.htm

  • How to change the date/time

    Now I chang the CMLocal date/time group and apply it to Device pool for phone, but I find the date/time displayed on phone is wrong ?why?

    I have the same problem with CCM 4.1(3)SR3 and Cisco IP Phone 7970.
    Can you help me please?

Maybe you are looking for

  • Downloading podcast error message

    I am unable to download any free podcasts. I subscribe successfully, but when I click "Get" a grey exclamation point appears immediately. The error message is "There was a problem downloading "the podcast" . The required folder cannot be found. Pleas

  • Automatically sync index in batch mode (w/o ctxsrv)

    Didn't find a way to rebuild the index in batch mode every 3 Minutes. Tried this, which generated error in Oracle: begin execute immediate 'alter index vocdev.ua_text_ctx_idx rebuild online parameters(''sync'');'; end; as a stored procedure, which sh

  • About calling a program while inserting the fields

    hi friends,                 Can you help to know how we can achieve to automatically calculate the field value and assign when all other fields were inserted... Consider num1,num2,num3 are three fields I am calculating the num1 and num2 values and pu

  • TS2734 iPhone stolen but location not available for 24 hours?

    I had my iphone stolen. It was immediately turned off. Since then it has come back online 3 times. The 1st 2 times I was able to see the location. The 3rd time I got e-mail saying that it was online and that the location would be available for 24 hrs

  • Maximum number of choices in a dropdown field

    Is there a maximum number of choices that can be placed in a dropdown field?