Ipod touch keeps giving me a blue screen and wont work, HELP!!!
So earlier today my ipod gave me a notification that a new ios software update was avaliable so i began the update. But during the update, i got impatient (like i always am -_-) and i decided to turn my ipod completely off by holding down the top and home buttons at the same time like an idiot........HUGE MISTAKE!! Now everytime i try and turn it on, all it does is show the logo and then it goes to a blue screen and the bluescreen fades out to white and stays that way. Each time i try and turn it off it keeps repeating this process. How can i fix this?? Will my ipod be like this forever? HELP :'(
HI.. i have the same issue... any help !!!!!!
Similar Messages
-
I was using my iPod touch 5th generation to listen to a podcast through the podcast app and searching the ebay app for some stuff and three quarters of the screen turned blue and part of the top of the blue part showed alternating colours of between what was on the screen and blue. Then my iPod restarted (and took a long time at that) and then it was just as if my iPod had restarted. Please help. This is first and only time that this has happened and nothing else was open on my iPod.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings -
My IPOD Touch was working great until about 2 weeks ago. Now when I try to play a game, read an ebook, etc. it automatically goes back to the screen showing all my apps and won't let me stay and use the app I have selected. Is there anything I can do?
Try a hard reset of the iPod. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
B-rock -
Ipod touch 4th gen needed a new screen and sleep/wake switch. So, I replace them. I was able to get to settings and do "erase all content and settings". I am not able to totally shut this device off as it keeps restarting after a few seconds. I have used itunes to restore and also recover. Device will actually shut off and stay shut off if I leave it connected to the computer. The moment I unplug (3 seconds) the apple logo appears, it boots, unlock screen appears, I can unlock and operate normally, unplugged or not. Just cant get it to completely shut down unplugged. Any thoughts?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem. Maybe you installed a bad component or damaged something during the repair/replacement.
Apple will not help since you worked on the iPod yourself. -
Upgraded ipod touch to ios 6 now only have blue screen and wont connect to computer
I upgraded my Ipod touch to the ios 6 now only have blue screen and wont connect but will charge. Have reset Ipod but just goes to blue screen on start up. is there any fix? 4th gen ipod.
Try a manual install (if iTunes will detect unit in DFU mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
My Ipod touch is stuck in the password screen and I can't turn it off or cancel. The screen that it is stuck at says :enter the password for the exchange account "exchange"
Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears -
4th gen ipod touch stuck on itunes plug in screen and don't have computer i setup with
Hey 34grumpy4u,
Thanks for the question. I understand that your iPod touch is currently in recovery mode, and needs to be restored. You can restore your iPod with any computer, then transfer your information back to your iPod once you have access to your backup (whether it was made via iCloud or iTunes).
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.
I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.
-
What should i do if my ipod touch 4 gen. has a white screen and it goes away rarely. Should i return it and get a new one?
If the problem persits after restoring the iPod to factory defaults/new iPod then you likely have a hardware problem. In that case an appointment at the Genius Bar of an apple store or returing it to Apple is in order.
-
My iPod touch is alternating between a white screen and the apple startup logo. Is it done for?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch is stuck on a white screen and i did everything hold the home botton and sleep botton togher, but it wont respnd it is just stuck on the white flash scree HELP PLEASE!
- Let the battery fully drain. The charge for an hour and see what happens, Try resetting too:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connct to computer and restore if it shows in iTunes.
- You can try placing the iPod in recovery mode and then trying to restore. See:
iPhone and iPod touch: Unable to update or restore
- Also see:
iPod touch: Hardware troubleshooting
Frequenly the white scree is due to a hardware problem. -
my ipod touch 1st gen has gone into recovery and wont restore because of a error 1 or something like that can someone help me quick this ipod is my little cousins and i dont want her mum to find out what happend
I have not seen a solution for error (1)
make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My ipod will only show the dead battery screen and wont taking a charge.
my ipod will only show the dead battery screen and wont taking a charge on any of my sinc cords or my outlet charger. And I have checked that nothing is in the plug port blocking the electrodes. What do I do now?
Put the device in DFU mode (google it) and restore via iTunes.
-
My mac keeps freezing at a gray screen and wont take me to my desktop. Ive tried restarting it, but it wont work. Its my fault, i shouldve done the IOS update! Someone please help
Grey Screen and spinning wheel at startup
http://support.apple.com/kb/PH11044
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Reinstall OS X
http://support.apple.com/kb/PH10763?viewlocale=en_US -
My ipod mini is showing Three of the icons and wont work.
My ipod mini is showing Three of the icons and wont work. Its showing the uncharged icon when plugged into my computer but when i plug it in to the wall, the apple comes and then swithes to the sad ipod icon. Before it goes back to the apple it shows the icon for the battery with an exclamation piont for like 1/2 a second. It repeats. The ipod has been telling me attempting to copy failed. could not be read from or written to for like 6 months but i just press sync again and it works. today it did that but then another box came up that said could not be read from or written to file or directory has been corrupted. then i restored it and it wouldnt let me press only sync checked items. so i had to drag songs to the ipod to get them on it and i was listening to it and a song stoped at six seconds and i ptressed skip and it didnt change for like 20 min so i reset it and now its doing this. does it need serviced? is it worth it or should i get a new one?
The first thing is to check for corrpt files. So go to my computer and open the iPod drive and post a screen cap of the files. Do a couple of different ones...like one of the main drive page and then one of iPod_Control and one of the iPod_Control Music folder.
Here is what my "dirty" drive looked like:
The circled files (with the exception of # 12) are the ones that I ended up deleting.
and here are the fixed drives
In order to show some of the files, you have to go to the top of the page, press "tools", "folder options", "view" and then "show hidden files and folders".
When you go to the music folder and delete excess files, you don't need to worry about loosing your music because it's all safe on iTunes.
You could also try changing the letter drive, details here: http://docs.info.apple.com/article.html?artnum=93499
Maybe you are looking for
-
I have written more or less same code like following to send file from server to browser in other web applications, where browser displays Save As dialog box to the user, but the same code doesn't work with portal. following code part of a page flow
-
ABAP-HR report using only OOPs...
Hi experts, Can u please tell me is this possible to write a report with out using LDBs but only using OOPs.. are there any classes or methods works as macros in LDBs? If yes, please guid me with proper hints. Tha
-
Why can't I just upgrade?
-
Album Art Mysteriously Disappearing
Once in a while I'll open iTunes or turn on my iPod and find that an album has lost its artwork. I replace the image with no problem, (takes 2 seconds with google images lol), and after that I save the image in an album artwork folder if it isn't alr
-
ECL-Viewer does not save Layer
After doing redlinig using WebECL-Viewer in cFolders i click on "Finish viewer session". A promt asks to save the Layer.cgm but after that, no Layer is saved. Anyone knows this problem? Has anyone a suggestion what to do? Thanks!