IPod touch mode?

I'm going to China in less than a week.
I would like to be able to use the wi-fi and non-network features of my iPhone 3gs, but none of the Phone/3G/anything that would charge high roaming fees (basically use it like an iPod touch for the week). Is there a way to do that? I was originally considering airplane mode, but that will turn off wi-fi too and I would like to have that still enabled, if possible.

To ensure that you don't rack up any roaming fees, there are two things you can do
system prefs > General > network
1. set data roaming to off
2. To make sure that there is definatly no roaming, go into cellular data network, and under APN, add a digit to whatever is in there. This will ensure that your iphone doesn't even connect to the network for data. Just remember to change it back when you get back home

Similar Messages

My iPod touch is stuck on one song in my play list when in the shuffle mode. How do I fix this to shuffle through all the songs in that playlist?

My iPod touch is stuck on one song in my play list when in the shuffle mode. How do I fix this to shuffle through all the songs in that playlist?

If you go to the Now Playing screen, the Repeat control is the the arrowed racetrack icon on the left side right below the scrubber bar. Tap the icon to change. It is white when Repeat is off.

My ipod touch is in dfu mode and does not want to turn on.

my ipod touch is in dfu mode and does not want to turn on.

What happens when you connect the iPod to your computer and restore viia iTunes?

My iPod Touch is stuck in recovery mode after I left it on while updating!!!

I was updating my ipod touch 3rd generation (ios 4.3, i think) and I saw a wasp and left the computer on in the middle of the updating process and now the ipod is stuck in recovery mode and it says the only way to get it out is to recover it, but that will erase everything!!! HELP ME!!! until i get an answer      I HATE YOU, APPLE URGG
operating system: whatever the latest available to itouch is.

Without knowing what the error message said all I can suggest is:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have an older 8GB iPod Touch no longer supported by tech. It is locked up in "Restore" mode and fails to respond to 2-button reset. I get the apple logo and then it pos back to the cord and disc icon for restore. Any advice?

I have an older 8GB black iPod Touch (no bluetooth) no longer supported by tech. It is "locked" in restore mode. When I do a 2 button reset I can get the Apple logo but then it pops back to the synch cord-and-music disc icon indicative of restore. Any advice?

Hello honeycrisp70,
For that error, check out the article below for additional troubleshooting to get it sorted out. If it continues then you may need to contact Apple support.
Resolve iOS update and restore errors
http://support.apple.com/en-us/TS3694
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Regards,
-Norm G.

My ipod touch isn't being recognized by iTunes or my computer. It's in "ipod recovery mode"?

My ipod touch 5th generation is not being recognized by my computer under devices or in itunes; however, when I click on devices and printers it comes up under "unspecified" and is labeled as "Apple mobile device usb driver." I right clicked the icon and hit troubleshooter and it opened itunes and told me I should restore and update my ipod. I did this twice and nothing has changed, it is still not being recognized. This is a big problem because the only thing that will pop up on the screen of my ipod is the symbol for the usb plug with an arrow pointing to the itunes symbol (meaning plug into itunes I assume). I have tried restarting my ipod and restarting my computer and nothing is working. I have the most recent version of itunes. How do I fix this?

first try:
iOS: Device not recognized in iTunes for Windows
next
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

My ipod touch will not scroll down in the voice mode so i can turn it off and go back to just touching it

my Ipod touch will not scroll down in the touch voice mode to cut it off

See this article for information on how to disable VoiceOver.
http://support.apple.com/kb/ht3577
B-rock

I did a backup on my iPod touch and it said it worked...but now it won't let me access anything and says "iTunes has detected an iPod in recovery mode. You must restore this IPod before it can be used." I will lose all my videos and pics if I do that

I did a backup on my iPod touch last night and it said it worked...I wanted to make sure my 1100 pictures and videos, mostly of my son, were safe since we rarely use the iPod touch anymore since we bought an iPad...I can't find them or I have no idea how to access them...I do not have a MAC...I have an HP computer with windows...
Now when I try to use my iTunes a message comes up that says my iPod is on recovery mode and has to do a restore to use my iTunes again...so when u click on that it states that pushing that button will restore my iPod touch to its factory settings...which means I will lose all my data...which I CANNOT do bc the videos of my son are some of his first words, first giggles, etc.
Now my iPod is stuck on a screen with a picture of a USB cord and an iTunes icon... and holding the power and push buttons down at the same time does nothing except bring up the apple icon for a moment and then it goes right back to the USB and iTunes icon
When I called Apple they said in order to talk to tech support I had to pay a fee of 19 dollars...which I think is kind of crap...I paid over 300 dollars for this and all I want is somebody to help me access my pics...I have done nothing wrong...this iPod was never dropped and never broke...I did the backup like I was supposed to and now I have an IPod touch that does nothing, and if my library of pics and videos are on my computer, I have no clue where or how to view them or back them up onto DVD....
I'm very upset and frustrated...please help!!!

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

Ipod Touch 5th Generation will not turn on, restore, or show up in itunes unless in DFU mode.

So a friend gave me his Ipod Touch 5th gen because he couldn't fix it himself and he bought a new one, and while I'm stoked to have a near brand-new Ipod touch, it's also frustrating me to the point I'm ready to give up on it aswell and pass it down the line. I'm not sure what he did to it, he says it just stopped working but you never know.
Anyways, the problem is that it simply does not turn on regardless of what I do to it. When I plug it into the computer, it gets warm; usually a sign it's charging fine. However, it doesn't show up on Itunes. I read some forum posts and searched around other places aswell, and tried putting it into DFU/Recovery(not sure which is which anymore, it's the one where you hold down the power button for 3 seconds, then home+power for 10, then home button for 20). It showed up on Itunes, and said it needed to restore. I downloaded the 1.2gb update it needed, but then it hung at the "Waiting for Ipod" progress bar. As it does this, I get maybe 3-5 Windows 'bing' sounds of a connecting/disconnecting device, ending on a disconnect sound. Itunes eventually times out the restore with an error code 4005, which I read means the Ipod has been disconnected in the middle.
After this, it doesn't show up on Itunes and I have to repeat the process to get it to show up again. I tried it a third time just now and it's still doing the same thing.
Any ideas? Really at the end of the line on ideas I think.
Please and thanks,
-Cody
P.S. I don't know if it matters but the warmth is coming from the top/camera end fo the Ipod. Not sure where the battery is versus the CPU, but maybe that'll help the diagnosis.
P.S.S. Also, when it shows up in Itunes in recovery mode, it doesn't show a serial number, so I don't think an Apple store would even work on it without a serial #.

Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
Check for hardware issues
Related errors: 1, 3, 10-47, 1002, 1011, 1012, 1014, 1000-1020, 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
Try on another computer.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The SN may not show up because of a hardware problem and does not mean Apple will not help

I restored my iPod touch and when it restarted it either freezes or loops in a restart mode. why?

i restored my iPod touch and when it restarted it either freezes or loops in a restart mode. why?

I have the same problem too. I just restored last night and it's been like this ever since. (14+ hours) ...

My ipod touch 2g a1288 wont restore. The download takes ages then ipod puts itself back in2 DISABLED mode, HELP!!

Ok so my ipod is making me really angry. If I don't figure this thing out today after trying for so long I think I'm going to take my car and repeatedly run the thing over until its in a million pieces.
Right now heres the long story which ill try keep kinda short but I do need to explain whats happened thus far
Ipod touch (2G), Mondel: A1288 which has gone into disabled mode and is basically useless at the moment.
Now I've done the thing where you hold the two buttons while plugged into laptop until itunes detects ipod in recovery mode. Then I try to hit restore, this starts up the download/ update thing which will not download because here in the dark ages of New Zealand our internet is slow. So because its so slow the ipod touch takes itself back into disabled mode! ahhhhhhhhhhhhh so FRUSTRATING
Now I'm aware that I can pre-download the firmware (which will still probably take ages but may save the ipod from timing out and going back into disabled screen) and then just hit control and select it when ipod is detected in recovery mode by itunes. The only thing wrong with doing this however, is when I go to the site to get the firmware from http://http://www.felixbruns.de/iPod/firmware/ and look in the drop down menu of 2G ipod touches, I don't see my model listed there so I'm wondering what firmware I can download for the A1288? Is it compatible with a different version? because it wasn't even listed in the drop-down menu of ipod touches.
I just wan't the thing going again! they put these things into technology that make it useless because they know the average joe like me will just give up trying to fix it and buy a new one. Well not this time, if I cant fix this, I'm going to run the thing over and that will be that!
Many thanks for reading my speal, I hope somebody can help

lol yea when i inserted the link i just copied and pasted thats why that happend... Lets try again... http://www.felixbruns.de/iPod/firmware/
Anyways when I go to it theres a drop-down list and you select the one you want and I know the number next to it identifies the model but the thing is they don't have my model listed so my main question is, what version eg. 2.1.1. or 2.2.1 etc. etc. etc. etc. will work with my model of ipod touch which is the 2g Model A1288?
Does anybody know? Does it work with any firmware thats for 2G ipod touches or do i have to get firmware thats model specific?

My iPod Touch won't restore on iTunes! It's stuck on recovery mode and I can't get it to restore after I updated the software! Help?

Okay, so I got an iPod touch, 4th gen, 32gb, brand new and running perfectly fine two years ago. Used it for about six months, lost it, and finally found it again a month ago tucked away in my recliner. It was as dead as a doornail, but I had it charged up and ready to go in a few hours.
So I wanted to get a special app for my iHome, as well as spend all of my accumulated iTunes cards that were previously useless due to the fact that I had lost my iPod for a year and a half. The app store said I had to update to the current software to download anything new, so I did just that about half an hour ago, updating to the latest version of iTunes and downloading the new software for my iPod like I was supposed to.
Only when I applied it to my iPod, it went into Recovery Mode as expected, but I can't restore it! I've made sure there's no extra USB attachments in it, my firewalls are currently down to get around this stupid thing (just turned them back on because it wasn't working), and feeling like I just let all this money slip down the drain.
If you have any relevant advice, please help! I'm running on Windows 7 with the current version of iTunes (64 bit). Help!

Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

I have an ipod touch that hasn't been used for a while. Now we want to use it, but the screen says "ipod is disabled connect to itunes"--but it won't connect. I have tried to place in recovery mode with directions given but still get the same message.

I have an ipod touch that hasn't been used in a while. We want to use it now, but the screen says "ipod disabled. connect to itunes". When I connect to itunes it tells me to enter my passcode, however the ipod will not allow me to do anything (and I don't know the code anyway). I tried to put it in recovery mode as someone suggested by holding the home button while plugging the ipod up from the computer, but I never did get the "connect to itunes" symbol, I continually got the same screen saying "ipod disabled connect to itunes". Help!

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

IPod Touch 4th Gen. iOS 5.1.1 - Sleep Mode and Other Questions

Hello,
I have an iPod Touch 4th generation with iOS 5.1.1
1) RE: Sleep Mode - I found this on another thread and it's regarding iOS 4.3.1.
Is the same still true for iOS 5.1.1?
If so, what is recommended for sleep mode - Airplane mode or Wi-Fi off - or is either one ok?
Wi-Fi is always ON with the 4th generation model running 4.3.1 when it is sleeping unless you either turn off the Wi-Fi or turn Airplane mode ON.
2) I only use my iPod Touch on my home Wi-Fi and do not use any cloud based syncing or iTunes Wi-Fi Sync. I do all my syncing manually from my MacBook Pro via USB to the iPod Touch. The way I do things is purchase what I need from my MacBook Pro via iTunes and then manually sync it to the iPod Touch. But there may be times, in the future, where I would want to purchase directly from the iPod Touch.
I recently updated my AppleID with my new email address via my MacBook Pro. But, I noticed that on my iPod Touch under "Settings" "Store" that it still shows my old AppleID. I have all Automatic Downloads set to OFF. How do I update the iPod Touch to reflect my new AppleID?
3) When I'm using Safari and I navigate to several websites, how do I easily get back to my home page (which is set to Yahoo!)?
Probably a dumb question but I can't seem to figure it out. I've set Yahoo! to my homepage but I would think there should be or is (and can't find it) a button/icon like on my MacBook Pro Safari to take me directly back to the homepage.
Thanks in advance for the help!

- Unless you use bluetooth, airplane mode and wifi off are the same as regards to battery drain. I like use airplane mode sinc that is directly under Settings.
- Go to Settngs>Store and sign out of existing account and sign in with the updated one
- I have no idea for the Safari question

My iPod Touch 4g is stuck in Apple Mode after attempting to install the Siri GUI. What can I do to restore?

I have an 8GB, 4g iPod Touch. It has the lastest iOS on it (iOS 5). Yesterday I used Cydia to jailbreak it. I had no idea what I was doing but I followed step-by-step instuctions and it worked! Needless to say, I've messed up several times (while rebooting) and I am now a Pro!! Lol. Anyway, today, I was installing the Siri GUI software onto the iPod. It was a long and drawn out process and I'm assuming that I did it wrong. It was stuck in the black screen with the little (loading) loop. It sat there for about 30 minutes. Sometimes the loop would spin, sometimes it would just be there. Finally, I pushed the Home and Power buttons at the same time and I got the Apple Logo. And this is where I am stuck now.
I have tried a number of things, such as:
* Holding down the power button and hoping that the "slide to power off" screen would come up. No response.
* Holding down the Power AND Home buttons at the same time thinking the "connect to iTunes screen" would come up. The screen just goes black and then the Apple Logo comes back up.
* I've tried connecting to iTunes but it doesn't recognize my device. My laptop doesn't even "ding" when I plug it in. I've tried changing the USB port that I have the cord plugged into. I've tried uninstalling and reinstalling iTunes. I've restarted my computer. I've went through the Apple Support troubleshooter and dealt with the "third party conflicts".
I'm not sure what else to do here. I realize that I probably should not be downloading, jailbreaking and attempting to 'mod' my iPod- I don't even know what DFU mode, GUI or most of the other hi-tech words mean. I am just pretty good at following directions, lol.
Can someone please help??
I'm using a Windows 7 OS on my laptop, not MAC.

I suggest try getting it back to your stock iOS and forget about jailbreaking.
http://support.apple.com/kb/TS1538
Try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

IPod touch mode?

Similar Messages

Maybe you are looking for