IPod touch not working with home network?

I know this question has been brought up dozens of times before, but I couldn't find a working solution in any other posts so allow me to explain my situation.
I got my touch a few months ago, it was working fine with my unsecured home network. Now, the ipod claims that is connected to my network, however it will not load webpages or anything else that might make it seem like it has an internet connection. When I go to Safari, the page attempts to load for what seems like forever and then comes up with the same message everytime claiming that the server has stopped responding or that the server cannot be found. It does, however, work perfectly with the free Wi-Fi hotspots that I connect with in businesses with no problems at all.
I have tried:
Resetting Network Settings
Resetting iPod (factory restore)
Resetting my router
Renewing the Lease on my iPod network connection
Turning the iPod's Wi-Fi on and off
Turning the iPod off and back on
Changing the DNS number to (4.2.2.2,4.2.2.3.)
I'm not sure if this is significant, but when I am "connected" to my network according to my iPod, it says I have full signal. When I am disconnected and my default network is just on the list of networks, it says that there are only two bars of signal strength.
Please help, I don't know what is wrong with this thing.

Have you updated your router firmware lately? If not, please do so.
DNS is usually provided by your ISP. I would use that unless your other devices can't reach the network either. A good alternative is OpenDNS which you can find out about at opendns.com.
When you think you are connected, tap Settings > WiFi > then the little blue > next to your network name. What type of IP address are you seeing? If you see that your IP address starts with 164, then you really are not connecting to your network.
You might want to look at a couple of router settings. What is DHCP set to? (this issues your IP address) and What is MAC address filtering set to? (if this is on and your iPod MAC address has not been entered into the router table, you will not connect). DHCP should be on, MAC address filtering off. Additionally, look at what your default DNS is set to. Most routers have a box to check saying "Use ISP" for DNS.

Similar Messages

  • IPod Touch not working with Verizon fivespot modem

    I cannot get my iPod Touch to work with my Verizon Fivespot hotspot. The hot spot shows up in the WAN settings, but when I try to reach the internet it says it is not available. The Touch works fine with my home hotspot. Any ideas?

    Do other devices work with it? What says "not available"? Is it Safari when you try to connect to a website? If you go into the network settings what IP address is assigned to the iPod? Do wifif arc show on the upper left? Have you looked at the documentation for the Verizon product?

  • IPOD TOUCH NOT WORKING WITH ITUNES

    I am using:
    iPod Touch 16GB 1.1.4 (With $25 Software Upgrade)
    Windows Vista Premium Edition
    iTunes 7.6.2
    Whenever I connect my iPod, the device connect sound is made and it shows up in the my computer window, but it will not show up or sync with iTunes.
    I HAVE ALREADY TRIED THE FOLLOWING:
    Reseting the computer
    Reseting the iPod
    Using a different USB port
    Using a different cable
    Erasing ALL of the iPod's contents (Yes I lost my $25 update as well)
    Restarting the "APPLE MOBILE DEVICE SUPPORT" in the "systems" application
    ...As well as many other things, all with absolutely NO results.
    I have tried to manage my ipod through other programs, nothing seems to work. I connected the iPod to a different computer and everything worked fine.
    I ASSUME the problem has something to do with the iPod Touch's drivers; for whatever reason they might be corrupted or installed incorrectly, thus preventing the iPod from automatically reinstalling them as well as preventing the possibility of syncing.
    My question is, how can I reinstall the drivers without having the iPod touch do it automatically?
    Any help would be much appreciated, thanks.

    I fixed the problem myself.
    If anyone else has this same problem and is looking to fix it, here is what I did.
    I found this on another site:
    "Okay well I spent about an hour on the phone with Apple trying to fix this problem. The guy I talked to seemed to have delt with this problem before. He tould me that Apple was getting numerous calls about the iPod touch not connecting with iTunes. So here is the solution that worked for me.
    The first thing you must do it uninstall iTunes and Quicktime using the controll pannel, add/remove hardware, on your windows computer. Once you have uninstalled both of thoes programes go ahead and look for anything else that is Apple and uninstall them as well. There should be an Apple updater or driver that is very critical to uninstall, this was the cause of iTunes not recognizing the new iPod Touch. Next make shure you have the very latest update for Windows on your computer, you can check this on Microsofts web page. Finnaly once you are shure you have UNINSTALLED EVERYTHING that says Apple, iTunes, or Quick time restart your computer and MAKE SHURE THAT YOUR IPOD IS NOT CONNECTED TO YOUR COMPUTER. Then download the newest version of iTunes and install it. Once the installation is complete go ahead and connect the iPod Touch and everything should work.
    I am not shure if this will work for everyone but in my situation it worked. I hope it helps some of you out there!!"
    That worked like a ******* charm. Hope this helps.

  • After firmware update ipod touch not working with my Sony Home Theater DAV HDX287WC any suggestions

    Is there a solution to play music from my iPod touch on my Sony Home Theater System DAV HDX 287WC after recent firmware/software upgrade? However, I am still able to play music through my ipod classic, but I am really missing the the functionality of the iPod touch with my home theater system.

    - Check to see if there is a firmware update for the theater system
    Sometimes this works but sometimes an IOS update breaks compatibility.
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • New iPod Touch not working with G3 iMac

    I got a new iPod Touch (4 gig) for Christmas. Tried plugging it into my iMac Power PC G3, and I get an error message. ( error OxE000001). Is my iMac too old to work with the iPod touch?
    Also as a second issue, I have a wireless network, but I don't have it broadcasting it's name for security. When I turn on my lap top, if it doesn't automatically find the wifi network, I just type in the network name, and it pops up.
    Any way to do this with the iPod Touch? (Type in the network name, even though it's not broadcast)
    I'll also list this question on the WIFI section.

    Ken;
    I AM running with iTunes 9.0.2. in my slot loading G3 iMac. There is no special Hack.
    You tried to help me earlier, when my G3 just would not work after I upgraded Safari and iTunes. I ended going to the Genius bar, where they worked on it for hours to get it going again. They installed earlier versions of both programs.
    I was going to keep it that way, until I was given an iTouch for Christmas. The iMac just did not see it. I was resigned to updating my iTouch through my son's iBook.
    In a question I had about upgrading my wireless network, John Galt said his 500mhz G3 worked OK with the iTouch. Over two weeks I slowly installed what he had, (or close to it) I think Safari has a G3 version, that I may have missed when you were helping me.
    The last thing I upgraded was iTunes 9.0.2. After three or four tries, and plugging in the iTouch USB cable directly into the iMac, the iTouch was recognized! It seems to work fine over the past week or so.
    Some odd things I have to live with. When I plug in the iTouch, iPhoto will start and ask about downloading pictures from the iTouch. I have to manually start iTunes if it is not already on. It does not automatically start like it does with my iPod nano.
    Also I did not realize how slow this machine is, I thought down loading a CD through a La Cie DVD/CD player at 1.3x speed was fast. My son's iBook downloads a CD a 9 x speed! Oh well... slow but steady.....

  • Why will iPod touch not work with beosound 8?

    We have 2 ipod touch.  One has just updated to version 5.1.1 and does not work with the Beosound 8. The other has the older version and works with beosound8.  Is this update the problem?Any suggestions?

    Yu can try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod
    Sometimes iOS updates break compatibility with accessorities.
    Have you contacted the manufacturer/went to their support site?

  • IPod touch not working with Sony clock radio.

    iPod 4th gen won't play music through new Sony clock radio.  It charges but won't play or control music.  Works with 2 iPhones tested but not touch.  Yes I am using the correct adapters, universal for iPod and the different ones for phones. 

    Does Sony say it will work with yur model iPod and iOS?
    Do the phones have the same iOS?
    Is the iPod fully seated in the dock?
    Does the iPod sync and charge OK?
    - Inspect the dock connector for bend or missing contacts, corroded contacts, broken, missing or cracked plastic.
    Sometimes this works
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    Other uses have reported problems with Sony docks. Use the communities search feature in the upper right and search for Sony. Use the advance search to restrict search to the iPod touch forum

  • IPod Touch not working with Yamaha YDS-11, since version 3.1.1

    In July 2009, I purchased a Yamaha home theater receiver model HTR-6240 with an iPod Universal dock YDS-11. The iPod Touch worked fine on it until I upgraded the iPod firmware to 3.1.1. When connected, it charges the iPod but the music only comes out of the iPod internal speaker and static comes out of the stereo speakers when turned up. I use an FM transmitter in the car that uses the line out and charges the Touch, and that still works since the upgrade. The Yamaha dock works fine with my 4th gen nano, so I am wondering how the 3.1.1 Touch upgrade affected the line out. Has anyone else run into this situation?

    I'm having the same problem using I use my iPod Touch (Gen1) in a Denon ASD-11R Dock hooked up to my receiver. Prior to installing the upgrade, this setup worked very well and I was able to view all of the functions on my TV screen and fully control the IPod. Since the upgrade, when I try to view the IPod Touch through my system, it shows that it is "Loading" for about a minute and then reports "No Song". I tried rebooting and restoring the IPod a couple of times and this did not change the situation. I can still control the IPod through my remote (play, pause and skip songs), but cannot get it fully functional with my sound system like it was prior to the software upgrade.

  • 2nd generation iPod touch not working with docking station. Any solutions?

    I've recently purchased a Philips micro music system (DCB2020) and whenever I put the iPod on the dock, it makes the connection sound but won't play music when I select the dock function. I've tried an iPod nano and that works so I don't think it's a problem with the docking station. My iPod touch is 2nd generation and has 4.2.1 software update. Does anyone have any idea how I could make the iPod compatible with the docking station?

    OK, Then sometmes this works:
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store and bring the dock.
    Apple Retail Store - Genius Bar          

  • Why is my iPod touch not working with my car stereo after the update?

    I updated to iOS 6 and now my iPod will not play when I plug into my car stereo with the USB port and cable. I am very frustrated!

    You can try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    However, sometime an iOS update breaks compatibility. If that is the case you will have to wait for either the car manufacturer or Apple to issue a an update to correct the problem.

  • Ipod touch not working with old ipod accessories..help?

    I just got an ipod touch for xmas. I realized that I had all these accessories that worked with my old 20g black and white ipod with the click wheel. I had an ihome, ihome to go, and a $40 portable charger. The ihomes will play the music when i plug it in, but they will not charge it, like they did previously. My $40 charger doesnt charge it. I am going away and I need the charger to work. Does anyone know how to make it work or have the same problem? Thanks...

    I just tried my iHome and it plays my music and it looks like its charging it. Also my third party docking station made by Tatil works also.
    Message was edited by: stefonhim

  • Ipod touch not working with logic3 speaker

    HI,
    My 4g 8gb IPod Touch running 5.1.1 wont work with my logic3 wis030 soundbar speaker dock (which says made for ipod touch) it sometimes says "Accesory not supported" and other times it wont dock unless i fiddle about with it, and then other times it docks perfectly fine and charges and plays music,
    im not sure if its the ipod or the speaker as the ipod is a couple of months old whereas the speaker is just under a year old,
    Thanks for any help,
    Quin

    It may be the speaker as i just rememberd that my last ipod did it just before i changed it on the insurance for this new one,
    Quin 

  • IPod touch not working with FM tuner

    I just bought the newest iPod touch that's available (not sure of the edition-woops!), and when I plug it into the FM tuner in my car it says that I need to download a program to use that accessory. Does anybody know what program it is/the name of it in iTunes/how to get past this obstacle?
    I had another ipod touch from 2 years ago (unfortunately got stolen =(! ) and it worked just fine- automatically played once I plugged it into the tuner.
    HELP please!!

    How do you connect the iPod to your car? Via the headphone jack? Via the dock connector/USB?. If the latter other users have experience similar problems (Does not properly work with car systems). Apple says the car systems have to be updated to accommodate the latest iOS.

  • Email not working with home network

    If this is answered elsewhere, my apologies.
    I have a first generation iPhone, which is set up on the wireless network at work and also at my previous apartment. I had no problems receiving e-mails whether over Edge or wirelessly. When I moved into a new building and set up the router, both the phone and Apple Mail on my MacBook refuse to receive e-mail from either work or personal Gmail accounts, though I can browse the Internet at my heart's content on either phone or MacBook and check email through the browser. If I take the phone off the wireless network, it pulls e-mail off the Edge data network just fine, and it continues to work seamlessly at work. I tend to just keep it on Edge now, which isn't ideal, but I get the e-mails that way. I've had a similar problem with random hotel wireless connections as well.
    Anyone experience a similar problem or have a solution? I'm using a Motorola Surfboard router at home and a WPA passcode. Thanks!

    I have been able to surf on Safari over the wireless network on both the phone and computer, and the phone does pull email on the work wireless network and previous home network. Gmail works just fine on the MacBook too, but Mail doesn't want to pull in messages at all.
    I actually played around more with my router (Motorola SBG900) and when I turned the firewall completely off, the e-mail finally pulled properly. Is it worth just leaving the firewall off, or can I adjust the settings so that it will allow the phone to access the network to retrieve mail? In the advanced settings of the router there are a ton of "Port ID's" and depending on Motorola's vague "High" "Medium" "Low" Firewall settings, it allows inbound access to different Port ID's. Thanks!

  • IPod Touch not working with older cables

    I got a 5G iPod (video) a few years back. I also bought extra USB cables, and the universal dock to go with it. I just got an iPod Touch, but it doesn't want to sync with the old cables. iTunes doesn't even register that it is connected. Other posts on this forum seem to suggest that the older cables work just fine, so am I missing something?

    I had lots problems with 5G iPod Video (30Gb) cable connecting with Win XP PC but that same cable works fine with my new iMac/20". However both of my kids iPod nano (latest version) cables worked fine under Win XP and I used the Nano cable whenever I wanted to update the iPod video under Win XP.
    Now the old Video cable even works with my daughter's 16Gb Touch (on the iMac though)...go figure...
    This probably isn't relevent if you are connecting to your G4 though...

Maybe you are looking for

  • Adding user-defined data

    Okay I am having problems, obviously. I am developing a program where the user will enter X and Y values and the program will calculate the relational data. However, I can't even get a start. First of all, the user defines the number of pairs of poin

  • My iBooks is crashing every time i do open it - what to do?

    Process:         iBooks [613] Path:            /Applications/iBooks.app/Contents/MacOS/iBooks Identifier:      com.apple.iBooksX Version:         1.0.1 (281) Build Info:      iBooks-281000000000000~1 Code Type:       X86-64 (Native) Parent Process: 

  • Determining automatic Storage location in RE

    Hello Gurus Im new to SAP and came came across this problem, I would grateful if you help me out. I want that while creating delivery with reference to RE sales document the storage location should be determined automatically. Is it possible and how?

  • Transferring photos on Ipod Photo

    i Have an Ipod Photo 60GB . it all works Ok and i have music and 20,000 Photos stored on it. However i have the following problem. i can synch my photos from My G5 to the ipod and store them ok. but what i want to be able to do is to transfer all my

  • HT4167 why won't my firewire port recognise my PreSonus Firebox

    Logic on my old macbook has decided to stop recognising my presonus firebox, even after all the latest drivers etc have been added. It just isn't showing up as an input or output option, yet is still lit up by the firewire cable....help!