IPOD touch on external display monitor

my ipod touch 4th generation is not working with the AV composite on external display or TV out.

Did it work before?
Have you chacked the setting in Settings>Video
TV out only works for specifiv apps.  The Video app is one. What were you trying?
Have you tried another TV?

Similar Messages

  • IPod Touch doesn't display playlists in ascending ASCII order, why /  It shows up in correct ASCII order in iTunes Devices listing?

    My iPod Touch doesn't display playlists in ascending ASCII order, why /  It shows up in correct ASCII order in iTunes Devices listing?

    Any suggestions? Anyone?
    MacBook Pro 15" 1.83GHz   Mac OS X (10.4.6)   3G 20gb iPod

  • I have an Apple Powerbook G4, and my monitor doesn't function. I have an external display Monitor, however it's stuck in extended screen mode. How do I get it to mirror or duplicate the display without use of the on-board?

    As i had said, I have an Apple Powerbook G4, and my monitor doesn't function. I have an external display Monitor, however it's stuck in extended screen mode. How do I get it to mirror or duplicate the display without use of the on-board? Is there a Fn key combo i'm missing or is the issue more serious then i realize? any and all help and hints would be greatly apprichiated, thanks in advance.
    -Powerbook User

    The PowerBooks have an F-key that toggles mirrored and extended mode. My PB is loaned out right now but I think it was f7. The keycap has an icon on two overlapping rectangles, as I recall.
    EDIT: Yes! Found a pdf of the PB manual it shows F7 is the toggle:

  • My ipod touch 3rd gen display is inverted colors

    My ipod touch 3rd Gen. displays colors are inverted. i have read a bunch of stuff about acceabilty but this one doesnt have that. so im not sure where to go from here.

    Go to Settings>General>Accessibility. There should be an entry for Black on White (or it could be White on Black), For later iOS it is titled Invert Colors.

  • IPod Touch 4th Generation Display issues

    Recently, my son's iPod Touch 4th Gen display has acted up after long periods of inactivity such as overnight.  Symptoms are a very light screen with many horizontal lines.  Turning the device of/off and doing a soft reset does not help.  He has discovered if he plays a game then turns the device on/off the display returns to normal and stays that way until another extended period of inactivity. 

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • How Can I Connect 2 External Display Monitors to a MacBook Pro? Help

    I want to know if I can (and How to) connect 2 external display monitors to a MacBook Pro... late 2006 & the new Unibody MBP.
    I'll appreciate

    Requires additional hardware - the Matrox DualHead2Go. For the late 2006, you'd need the DualHead2Go Digital Edition, and for the unibody you'd need the DualHead2Go DP Edition, with appropriate cabling (and a DVI-to-VGA adapter for the late 2006 MBP).
    http://www.matrox.com/graphics/en/products/gxm/dh2go/

  • How many colours can the ipod touch 2g can display?

    how many colours can the ipod touch (2g) can display?

    The Apple specs don't say.
    Why does it matter with so small a screen?

  • My iPod Touch does not display as a device on laptop(s), although it works fine in ITunes.

    I have Windows 7, using latest version of Itunes, problem occurs on 2 different laptops, USB cord is good, Apple Mobile Device is recognized, running.  Stopped and restarted AMD.  I believe I have completed all available troubleshooting.
    My intent was to transfer songs from my iPod to my Itunes library.  I found a video on uTube, but the first step is to work with iPod device.
    Thanks in advance for any help.
    Results of sync test:
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP Pavilion dv7 Notebook PC
    iTunes 10.7.0.21
    QuickTime 7.7.1
    FairPlay 2.2.19
    Apple Application Support 2.2.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.0.59
    Apple Mobile Device Driver 1.62.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0032AC3403358008
    Current user is not an administrator.
    The current local date and time is 2012-11-30 15:16:12.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., ATI Mobility Radeon HD 6370  
    ATI Technologies Inc., Intel(R) HD Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {DD7475B0-33A9-48B0-AAE7-94A0B856EE8E}
    Description:            Intel(R) Centrino(R) WiMAX 6250
    IP Address:             0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:      Yes
    DHCP Server:        
    Lease Obtained:     Wed Dec 31 18:00:00 1969
    Lease Expires:       Wed Dec 31 18:00:00 1969
    DNS Servers:        
    Adapter Name:        {63C55599-0DEB-4D07-B4D4-95B71BBE1BEC}
    Description:            Microsoft Virtual WiFi Miniport Adapter #2
    IP Address:             0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:      Yes
    DHCP Server:        
    Lease Obtained:     Wed Dec 31 18:00:00 1969
    Lease Expires:       Wed Dec 31 18:00:00 1969
    DNS Servers:        
    Adapter Name:        {CA6A7F92-17A5-461E-8142-B76D9B19B605}
    Description:            Microsoft Virtual WiFi Miniport Adapter
    IP Address:             0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:      Yes
    DHCP Server:        
    Lease Obtained:     Wed Dec 31 18:00:00 1969
    Lease Expires:       Wed Dec 31 18:00:00 1969
    DNS Servers:        
    Adapter Name:        {69EF9C79-3181-4701-BA0E-A85868D95456}
    Description:            Intel(R) Centrino(R) Advanced-N 6250 AGN
    IP Address:             192.168.1.104
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Fri Nov 30 14:06:56 2012
    Lease Expires:       Sat Dec 01 14:06:56 2012
    DNS Servers:         192.168.0.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-11-30 14:54:21.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.3.0),
    E: hp DVDRAM GT31L, Rev MR52
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.7.0.21 (x64) is currently running.
    iTunesHelper 10.7.0.21 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    Lisa's iPod, iPod touch running firmware version 1.1.5
    Serial Number:       9C811AKA0JW
    **** Device Sync Tests ****
    Sync tests completed successfully.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    - The following will erase you iPod. If iTunes then does not see the iPod your have a brick
    Place the iPod in Recovery Mode and try to restore via iTunes.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Is there a way to use a non-apple external display (monitor) without having my macbook air plugged in?

    Just got a 27'' AOC monitor that I'm using with my Macbook Air (purchased in 2013). It's working great but as soon as I unplug the power adapter from my laptop the monitor goes black and says 'no signal'. I've been reading online that you need to have the power adapter plugged in to use an external monitor - my questions are: 1) does that harm the laptop's batter? if so, 2) is there a workaround? if there is no workaround, 3) does an Apple monitor also require that a laptop be plugged in for the external display to continue functioning while the laptop is in clamshell mode (closed lid)?
    Thanks in advance for any advice

    Thanks, Matt. In my case, the monitor definitely shuts off when I unplug the power from my laptop in clamshell mode. If the lid is open, however, the monitor continues to function even without the power adapter plugged into my laptop. Ideally, I'd like to have the lid closed on my laptop and be able to use the external monitor without having the power plugged into my laptop. That's what doesn't seem to work - if your does, please let me know if you have any pointers.
    Thanks again!

  • When my ipod touch (3rd gen) displays an white image, a whiter spot appears on the screen?

    It only appears when displaying light images, and i have only just noticed it a few days ago. My ipod touch is running iOS5.0.1
    If you have had this problem, please tell me how you fixed it.
    It's not a dead pixel, it's just a small circle of pixels that seem to be a noticably different shade of white than the others.
    My ipod is under 2 years old now, so the warranty is void.

    You can try the standard fixes to rule out a software problem:
    - Reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Restore from backup
    - Restore to factry defaults/new iPod.
    If you still have the problem then repair/replacement is required if you do not want to live with it.

  • Brand new ipod touch won't display home page

    Hi Folks
    Just bought 2 new Ipod Touch's for the kids for xmas. One turns on fine and went straight to the home page and allowed me to personalise it but the other one starts up and just displays a picture of the USB cable and an upward arrow pointing to an ITunes symbol. It won't allow me to go to the homepage. Have i done something wrong????? Help

    It needs to be restored.  The only way to do that is to connect it to iTunes and restore as new.

  • G580 External display monitor

    Hi Lenovo community, 
    My sister's G580 laptop computer have malfunctioned display screen, also not booting and showing green-pink lines.
    We are not looking for replacement and repairing of the screen(as warranty is off) and she already have new laptop but I am thinking if is possible to use as computer connected on external monitor throught HDMI or display port provided on laptop without functioning the main laptop display?  
    Thank you for your advice and best regards, 
    Žare
    Solved!
    Go to Solution.

    Hi!
    Yes it would work as long as it is the only external display connected to the system.
    Try Pressing F2 When you Power On the computer to boot into BIOS.
    If still Not working, It is possible that the computer might be having boot/Post Issue.
    Try Draining the Power by doing a Power Drain,
        REmove the AC and Battery
        Hold the Power Button down for at least 15 sec
        Reconnect everything including the HDI or the VGA alone then check.
    You can also try reseating the Memory
    See this Maintenance Manual for reference on memory removal
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Settings for an external display monitor

    I'm working with FCP 7 but my screen is small 13.3 and for a person of my age (60) is a litle difficult to work. I would like an external monitor display but I cant afford to buy the Apple 24" display, so I'm looking for an other alternative. I found Viewsonic VX2260WM full HD 22"screen very affordable or maybe Samsung XL2370 23" screen. So I need now some help to setup all the system. I would like to have the possibility to have FCP work space in the big monitor but the preview in my MCP. Please, dear adviser, take in mind, for my age, that I need all the explanation full detailed.
    Many thanks in advance
    JoseCup

    Thanks Jerry for your advice. I have had for a week a 22" ViewSonic connected with a HDMI Mini Display port adapter. I tried to do my best for the setup of this monitor with 1080p resolution while the MBP 13" was setup to the native resolution 1280X800 but the image at the external display was not good enough as the MBP screen. In any case I have return the ViewSonic because other problems. I'm now looking for an other monitor but I'm not sure what to look for. I need for a bigger work space for Final Cut but with a good quality image. Do you have any advice?

  • Ipod touch 3g external speaker

    I have a 3rd gen ipod touch, and out of no where the external speaker stopped working. I've restarted it several times, made sure the volume limit was off, and tried with sound check on an off. It works fine with headphones in though. Also i'm really trying to not have to restore it.

    I'm having the same problem with my 4th gen iTouch. I purchased an iTouch 4th generation which worked fine for a month or so, only to have the external speaker stop working all together. I returned it to Best Buy, and they gave me a new one.
    Now the new 4G iTouch is doing the same thing, but a little different. I can listen to my voice recorder using my external speaker, but I can't hear anything else (YouTube, other apps) through the external speaker.
    I've checked my settings countless times, and can't figure out what's up. Another trip to Best Buy? Or is it me? I will try the reset & restore.

  • Ipod touch powers external speaker

    Looking for tips, links to existing discussions, etc., on using the iPod Touch 3.5"" jack output to power an external speaker.  How much power does the jack provide?  Enough for a generic 20 watt rated speaker that's fairly efficient (say, 92db 1w/1m)?  Or do I need to build a small wattage op-amp device to drive the speaker?

    Maybe:
    http://www.head-fi.org/t/97419/what-is-voltage-output-of-ipod-headphone-jack
    http://www.ehow.com/info_12024907_many-watts-ipod-headphone-jack-put-out.html
    Google for more.

Maybe you are looking for

  • Problem with getting iPod to work.

    I'm having a problem with getting an iPod to connect to my computers. Also I can't even really get it to run. My brother gave it to me one or two years ago and it had these problems I just didn't think of the idea of going directly to Apple to figure

  • Can I pass Chinese characters in a queue (Do queues support Unicode)?

    I am aware that there are a number of tools to allow the use of Chinese characters within LabVIEW. I have successfully built an application where I am able to switch between English and Chinese so that all screen text, buttons, multi-column list boxe

  • Every time second restarts only connect http:\127.0.0.1:8080\apex

    respected sirs, I am using vista. Recently I installed / switched to apex 3.2 from apex 3.1 After installing the apex 3.2 i am facing one problem. That is every time when i boot the system first time, if i try to go database 10 G home page (ie 127.00

  • Issue on Pricing

    HI SAP Gurus, Could any one help me out with an Issue on Pricing The need is Our company sells consumer goods through our website store. We introduced a coupon system. The coupn system is that if u r a coupn member (means employees of the organisatio

  • Foreign trade number in billing

    Hi Experts,,, i am trying to delete the foreign trade number from the billing document ( vbrk-exnum ). I just want to know is this number is further used in any other module. how can i check that any further document is not created through the referr