IPod Touch Only Plays Sound on Dock

I have a 4th generation (?) iPod Touch, 32 GB, not the newest iPod touch, but the second newest. It is completely up to date, and it has worked perfectly ever since my mother gave it to me when she upgraded to an iPhone 5. This morning, I plugged it into my MacBook (late 2009-model white unibody), which is also entirely up to date with newest OS and all software updates. It synced, and I waited until it told me it was finished, clicked eject, and unplugged it. I got into my car to go to work, plugged the auxiliary cable in like I always do, and hit play. It played two songs just fine, but a minute into a third song, it stopped producing sound. I looked down at my iPod, and there was no slider for the volume. I tried using the volume buttons, and they didn't do anything, either. I unplugged the auxiliary cable, but still no sound, volume slider, or volume button usage. I rebooted the iPod: still nothing. I got to work and plugged my iPod into my iHome, which uses a docking system rather than an auxiliary cable, and it works perfectly. I pulled the iPod off the dock, and it's once again giving me sound. However, I'm afraid this will happen again. My iPod didn't start acting up like this until after I plugged it in to my Mac to sync it. Anyone else have this problem or know a solution? Quite frankly, I am stumped.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price                  
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Similar Messages

  • My Ipod touch doesnot play music via docking station of microset, but is charging

    my Ipod touch doesnot play music via docking station of microset, but is charging. We have already restored the settings of the Ipod but it doesnor help. Please your advice.

    Yes the manufacturer (Philips) says that the device (CD player with a docking station) should work with my IPod+iOS 6.2.1; we've updated the Ipod to iOS 6.2.1.
    We've bought the device this week, so I assume the firmware is up-to-date...
    My Ipod also does not work on another device with Apple-docking station, whereas other Ipods do connect with my new Philips device. I think it is pretty clear that my Ipod is the problem?
    I think we'd best go to an Applo store?

  • Ipod touch only plays through one speaker when docked to car

    It was working fine yesterday until I restored my touch and now this morning only plays through the left speaker. Ive read other topics with people that have this problem but no answer that fixes the problem.
    I have a 8g touch and an alpine system in my car. The cord is fine because my old video works perfectly and the touch has no problem connecting to the computer.

    hmmm sounds like a could be either a faulty connection in your alpine, or the ipod touch has a problem sending the signal through the USB Pin look into google search for this kind of problem, but I would try another cable or a new usb cable. either way it could be the connection to the audio pin section of the usb connector of your alpine.

  • My ipod touch wont play through my docking station

    hiya i have an ipod touch. aout a week ago it stopped working with my docking station. it wont play through the docking station speakers. ive tried two other ipods on the station and they work fine so its clearly a problem with my ipod. the ipod registers that its plugged into a charging source and starts playing music when its plugged in but through its own speakers rather then the docking station. i've tried doing a full factory reset and that didnt work. does anybody have any suggestions?
    x

    - Inspect the dock connector for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Ipod touch only plays through left headphone/speaker

    my ipod touch first gen recently started only working through my left headphone, at first i thought it was the headphones but then i tried it with numerous other headphones and speakers etc and it still only plays through one.
    I've reset, restored the ipod and tried everything if any one can help it would be greatly appreciated.

    What happens if my itouch is 2 months out of warranty? I don't think it's reasonable to ask me to purchase a new one for a headphone jack problem. I expect a 300.00 piece of electronics to last more than 14 months, call me crazy. Does anyone have a suggestion other than replace? The Apple Store in Orlando told me it would cost about the same as a new one to fix it. Please help!

  • MY 4TH GENERATION IPOD TOUCH ONLY HAS SOUND WITH HEADPHONES

    my ipod touch 4th generation only has sound in headphones

    - Try inserting/removing the headphone plug at least a dozen time.
    - Cleanout/blowout the headphone jack
    - Reset the iPod. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    If still problem that indicates a hardware problem. Likely the headphone jack is bad.

  • HT1665 I have recently purchased a sony docking station and my ipod touch wont play through speakers.  does anyone know why

    I cant get my ipod touch to play through a docking station I have recently purchased.  A second ipod touch works fine.  Can anyone tell me why it wont play through speakers?
    thanks

    What model iPod and iOS works and which does not?
    Sometimes a 4G iPod will not fully sead in the dock because its case configuration is different that previous models.
    Also, sometimes an iOS update breaks compatibility.
    Have you checked the dock manufactuer's support stie for compatibility?
    Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • My ipod will only play from 1 heandphone. whats wrong?

    my ipod touch only plays from 1 headphone and iv'e bought 3 different pair. it'll only play if i do a certain thing with the cord. idk what to do. help me !!!

    Hi,
    This article: http://support.apple.com/kb/TS2802#acoustic provides tips that will resolve most hardware issues. One of the tips it provides is checking the iPhone's headphone jack for debris. You can try connecting and disconnecting the headphones a few times to remove lint or anything else that might be down there.
    If the issue persists with some headphones but not others, the headphones with the issue will need service. You can setup service for the Apple Earphones with Remote and Mic online here: https://selfsolve.apple.com/GetWarranty.do
    -Jason

  • IPT4 doesnt play through INTEMPO dock while an old ipod does. sound comes from ipod speaker only. why not thru dock speakers?

    My old iPod works fine in an INTEMPO dock. My new iPod touch 4 will only play in the dock thru its own speaker and there is also a 'not charging' message.
    Is the dock not up to handling my iPod Touch4?

    Two possible reasons:
    - The configuration of the 4G iPod prevents the iPod from fully seating in some older docks, those not deisgned for ohe 4G.
    - Some docks are not compatible with the later iOSs
    Have you went to the manufacturer's support site?

  • My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

    My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested.  How can there be audio issue for all these devices at the same time?
    As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

    Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
    I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
    What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
    Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
    Peace,
    P. Dreadie

  • Brand new Ipod touch G4 with sound only in one earbud

    I have a brand new Ipod touch G4 with sound only in one earbud.  I have tried different types of headphones, but get the same result.  If I jiggle the connector pin, I can get sound on both earbuds, but only on one side when the connector pin is push all the way in.
    I have an older Ipod g4 without this problem
    any suggestions?

    Try on your ipod going to Settings-General-Accessibility. Scroll down into Hearing and see that Mono Audio is off. Maybe that's the problem.

  • My ipod touch wont play any music, when i try to play a song, it just keeps pausing. no sound comes out of the headphones or internal speakers. what can i do to fix this problem? ive tried charging it and resetting it but nothing works.

    my ipod touch wont play any music, when i try to play a song, it just keeps pausing. no sound comes out of the headphones or internal speakers. what can i do to fix this problem? ive tried charging it and resetting it but nothing works.

    my ipod touch has the same problem. I restored it three times, but that can't help.

  • IPod touch only works in docking stationion

    my iod touch only works in the docking station, where I can access emails etc. however, when intake it away fromthe docking station, it stops working, and all I see is the apple logo on screen. It appears to be charging she docked. Any advice?.

    Hi Magstar33,
    I'm sorry to hear you are having this issue with your iPod touch. If your iPod is restarting and/or freezing on an Apple logo screen when you unplug it from power, you may find the information and troubleshooting steps outlined in the following article helpful:
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
    Regards,
    - Brenden

  • Ipod Touch 4g not recognized by docking station anymore

    Hi there,
    Have got a problem which just arose a few days ago, my ipod touch isnt recognized by my docking station anymore for some reason?
    My docking station is a Sony RDH-GTK33iP Mini HiFi and the box it came out of says its compatible, its just all of a sudden my ipod doesnt get picked up by the dock so cant play music or charge. My Ipod was at the time I found out it wouldnt connect, was in "Headphone" mode (no idea how it got into that mode) but now I sussed that out & sound is coming out of the external speaker of the ipod again,
    When connecting to the dock, the dock just keeps flashing "CONNECT" and will just keep flashing that whilst the ipod is docked on it until I take it off and then it says "IPOD" which is what it normally says when the ipod is docked and recognized, and also gives a tone confirming theres a ipod docked which doesnt happen now with this ipod, I have yet to try a different Ipod.

    - Does the iPod work Ok with the internal speaker and when headphones are connected?
    - Inspect the dock connector on the iPod and dock for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Reset the dock and go to the manufacturer's support site
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • IPod Touch wont play music or connet to iTunes!

    My ipod touch wont play music through the headphones or docking station, it only plays music through the actual iPod and it isnt found when i connect to itunes, help!

    - Try here for getting iTunes to see the iPOd:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    - Try resetting for the other problem:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - The try restoring, first from backup and if problem persists, restore to factory defaults/new iPod.

Maybe you are looking for

  • Retrieve city and state from zip code that is entered by user

    I am trying to use AJAX to retrieve city and state from a table based on a zip code that is entered by the user. Two are text fields (zip code and city) and one is a SELECT field (state). 1. I defined an application item called TEMPORARY_APPLICATION_

  • IPad export to PDF font problems

    Hi guys, would really appreciate any help you can provide on the following: So I can happily create wonderful documents on pages or keynote. The issue is when I export then to PDF which is by far, what I think is the best option as it seems to retain

  • Getting home video in to my Imac

    Can I use my minni DVI to load video from my cam. I have the DVI to yellow RCA or s-cable adapter. If not does anyone have any idea how I can do it. My can has red,white and yellow RCA out.

  • ISU function module bapi_utilinstallation_chanfact

    hi, i hv to use bapi_utilinstallation_chanfact to replace due date field BIS in ETTIFN table to the sy-datum.what are the parameters that i hv to pass & which table should i pass(i am currently passing it the AMOUNTTABLE structure).what parameters hv

  • CVP 9.0 (1) - VXML Server service is not getting started

    Hi I am installing a CVP 9.0(1) in my lab and the VXML Server service is  not getting started; It throws the below error. From CVP Error logs, I see the following the snippets. 13: 172.16.13.147: May 29 2013 11:53:55.937 -0700: %CVP_9_0_Infrastructur