IPod touch restore error 2001

Hello, i have troubles with my iPod touch. It ran out of battery and would not charge  So i decided to restore it and the "2001errors appers. I have my iTunes and Mac up to date. Anybody can help me? thanks

it is a usb issue so try another one. look herehttp://support.apple.com/kb/ts3694#2000

Similar Messages

  • Ipod touch restore error 1604 / 1603

    Hi, I plugged my new ipod touch into my computer but itunes did not show it, so I was told to restore it and i got an unknown error 1604 (sometimes 1603). I took it back an got a new one, and exactly the same thing has happened!
    Can anyone help at all?
    Thanks

    Ok, A few things to check:
    - USB port must be USB 2.0
    - iTunes must be updated to 7.4.3.1
    - XP must have Service pack 2 installed
    If all these are present and correct, try this:
    - Unplug all USB devices including iPod Touch
    - un-install iTunes
    - Re-install iTunes 7.4.3.1
    - Restart PC/MAC
    - Reset iPod Touch (hold down the sleep button until red slider)
    - Restart PC/MAC
    - Plug in iPod Touch
    iTunes should recognise the device. If not there's something else you can do:
    - Unplug all USB devices including iPod Touch
    - un-install iTunes
    - un-install Apple mobile device driver
    - Re-install iTunes 7.4.3.1
    - Restart PC/MAC
    - Reset iPod Touch (hold down the sleep button until red slider)
    - Restart PC/MAC
    - Plug in iPod Touch
    If that desn't work, take it to an Apple store, to evoke your worldwide 1 year warrenty.
    Hope this helps/helped.

  • Ipod Touch Restore Error 2006

    I downloaded ipod touch 3.1 and since then itunes keeps requesting me to restore but have been unsuccessful. I keep receiving "ipod could not be restored. An unknown error 2006."
    I've been through all of apple.com/support and have been unsucessfull with all the recommendations. My ipod looks like this http://support.apple.com/kb/TS1275
    Does anyone have anything useful instead of the generic recommendations (unplug, restart, reinstall, etc...)?
    Please help. I would like to listen to my ipod instead of tinker with it every evening!!!

    Ty DFU mode, see this post: http://discussions.apple.com/thread.jspa?messageID=10457379&#10457379
    Is your ipod connected directly to the USB port?

  • IPod touch restore error 1604

    My iPod touch has been working well for some weeks. When I tried to connect it to my PowerBook yesterday it downloaded a new version of iTunes. Since then it is in restore mode and has an "unknown error 1604". This continues after re-installing iTunes on my Powerbook. Who can help?

    Thanks, but I don't do windows.
    What I have done is delete the file iPod1,11.1.2_3B48bRestore.ipsw from ~/Library/iTunes/Software Update/ and reload it (3 times now - I am persistent).
    I also recovered two different versions of iPod1,11.1.1_3A110aRestore.ipsw, but it unpacks to a folder, and I can not get it to change Kind into "iPod Software Update File".
    Note I have been doing this on a older Power PC machine running 10.4.11 (I have a lot of expensive legacy software in Classic). Next step is to try this with a newer Mac G4 dual core.
    Anyone have any other ideas?
    Message was edited by: jlc20

  • Ipod touch, restore error 13. please help

    After ipod touch refused to sync, decided to restore. Restore never finshed and i got an error 13 message. Using Windows XP, Have tried logging into a new user account and repeating process but still getting same error. Has my new ipod just become a paper weight?

    I don't know about a Mac, but with a Windows PC it recognizes the iPod as a different device if you plug it in to a different usb port. If you plug the ipod into the new usb port and check Device Manager (right click My Computer, select Hardware Tab, and click Device Manager button). The Touch should show up under "Universal Serial Bus controllers" as something like "Apple Mobile Device USB Driver". See what it shows up as and then unplug it and plug it in to the original usb port, holding the shift key until it shows up in iTunes (or you get the error message). Check what it is showing up as in Device Manager. If it showed up using a different name, then delete the device. Then unplug and replug the usb cable and see if it shows up as the correct device when it is detected. Of course if you don't have a problem with sticking with the new usb port you could just do that...

  • Could not restore 1st gen ipod touch unknown error occurred(2003)

    could not restore 1st gen ipod touch unknown error occurred(2003)

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    Also, have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • TS3694 iPod touch gets error -1303 when attempting to restore after update (W7)

    iPod touch gets error -1303 when attempting to restore after update (W7).  This error is not shown anywhere in the specific list.  Have done all recommended recovery methods (reboot, update iTunes, restart iPod) to no avail. What is next?

    Usually the 1303 error is in regards to a corrupted or missing backup of your iPod Touch.  Try removing or moving the backups to another location and then try to restore your iPod once again.
    See this article for information on where backups are stored.
    iTunes: About iOS backups
    B-rock

  • How can I fix error 14 in my iPod Touch restore?

    When I try to restore and update my iPod Touch, appears Error 14 in my iTunes interface. How can I fix that error?

    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Above from:
    http://support.apple.com/kb/TS3694#error14

  • When trying to do a recover and update an old iPod touch, "unknown error" occurs and nothing happens.  I have followed all the trouble shooting suggestions but nothing works.  Ideas?

    When trying to do a recover and update an old iPod touch, "unknown error" occurs and nothing happens.  I have followed all the trouble shooting suggestions but nothing works.  Ideas?

    Hi msclaude,
    Welcome to the Support Communities!  I'm not sure from your post what steps you have tried, but it sounds like you may need to use recovery mode to address the issue with your unresponsive iPod touch.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    http://support.apple.com/en-us/HT201263
    If you can't update or restore your iPhone, iPad, or iPod touch
    You can put your iOS device into recovery mode, then restore it using iTunes.
    Use recovery mode
    You might need to use recovery mode to restore your device in these cases:
    iTunes doesn't recognize your device or says it's in recovery mode.
    You see the Apple logo onscreen for several minutes with no progress bar.
    You see the Connect to iTunes screen.
    Learn what to do if you see the progress bar onscreen for several minutes.
    To put your device into recovery mode, follow these steps:
    Turn off your device and leave it off.
    Plug in your device's USB cable to a computer with iTunes. 
    Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
    When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again. 
    When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
    Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.Get more help
    Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
    If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
    I hope this information helps ....
    - Judy

  • "iTunes could not connect to iPhone (its a ipod touch) unknown error OxE8000065. Help!

    Ran updates on my MacBook Pro. Then I updated iTunes,  iPod touch was connected at time, came up with unknown error 1602 during restore and now "iTunes could not connect to iPhone (its a ipod touch) unknown error OxE8000065. Help! ipod screen is black (can see it stopped while charging at 2.53). Have tried many of the suggestions found in Apple support and online.

    http://support.apple.com/kb/TS3694#error1602
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • When I plug in my iPod Touch a error pops up saying 'iTunes could not connect this iPhone. An unknown error occurred (0xE8000084)." What do I do??

    My ipod is exactly 2 years old, and it has nothing to do with the cable connecting it to the computer for all I know.

    See:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • TS3694 iPhone 3 GS restore error 2001 or 2006

    Need help with restore error 2001 or 2006; I have updated iTunes and OS to latest releases. Thx, LJ

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

  • HT201210 iPhone 4s will not turn on, a screen shows up telling me to connect to iTunes to restore and update to iOs7, but when I try to restore error 2001 comes up and will not let me restore. I still cannot turn my phone on. None of the troubleshooting t

    iPhone 4s will not turn on, a screen shows up telling me to connect to iTunes to restore and update to iOs7, but when I try to restore error 2001 comes up and will not let me restore. I still cannot turn my phone on. None of the troubleshooting tips work, help??

    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process.
    FollowTroubleshooting security software issues to resolve this issue.
    In rare cases, these errors may be a hardware issue.
    If the errors persist on another computer, the device may need service.

  • So my Ipod Touch restored for some reason, and it doesnt show any of the apps i bought on iTunes. How do I make them come back?

    So my Ipod Touch restored for some reason, and it doesnt show any of the apps i bought on iTunes. How do I make them come back? Please Help

    Redownload them from the iTunes Store. It's free.
    (58292)

  • Ipod touch unknown error ocurred 0xE800000A

    Hi,The following error is coming up on my itunes I  have just updated my ipod touch can anyone help?

    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Maybe you are looking for

  • Error message when attempting to sign/certify a form

    Tried posting this in the Forms section and got no responses. At the moment, I am working with Acrobat Professional 8.1.  I've created a number of simple forms in LiveCycle Designer for our department to use, but they have to be certified by our Doc

  • How do i turn TV Out feature on?

    with my 30 gig i had no problems. With my 80 gig TV out is stuck on OFF... and also i can't even use my motorola phone charger to charge my 80 gig thru my itrip like with the 30 gig. That's wack, am I tripping or are there solutions to these problems

  • Collections w/ external hard drive

    I set up a bunch of collections that filtered out pictures based on various criteria (keywords, ratings, etc). I then decided to move my pictures to an external hard drive since my laptop was getting full (I backup elsewhere). Since then, I have not

  • How to install adobe flash playder

    How do I install Adobe Flash Player, Please step by step.

  • SRKIM: per_all_people_f  Table 의 global_name 이 null

    PURPOSE per_all_people_f table 의 global_name 이 null 인 이유와 이를 해소하는 solution에 대해 알아 본다. Explanation 특정 workflow 실행 시 approver 의 이름 display 에 문제가 있어 확인 시 per_all_people_f table 의 global_name field 가 null 임을 발견 하였다. 이에 대한 원인은 해당 column 이 HR_PF.K 적용 시 새롭게