Ipod touch shows no wifi
iPod Touch shows no Wifi - can't click anything. Any ideas?
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
Similar Messages
-
Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.
Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon, -
My ipod touch shows it's connected to the internet, but says it can't connect to the server. How can I fix?
The machine is booting up so I wouldn't worry about the PRAM battery. I set my time off of the internet, since my pram battery is dead & I do not feel like changing it. click on time to get this panel.
The imac I have has 1.25GHz and I am assuming has an airport card because the Internet worked on it when I tested it out before I bought it.
To sort things out, I'd connect the machine via an ethernet cable to you router. Thus, if it works well via a cable you will have narrowed the problem down to the wifi card.
My wireless is on WPA/WPA2. How do I get the Internet to start working?
You sure the machine is connecting to your router not a neighbors? Set router to now encryption & see how things work. Just for testing. -
I bought a new ipod touch for my wife, I put my Apple Id in to activate it, b/c we were not home, now that we are home I would like to set up a account (apple) of her own, so that it won't be interfering with my account. thanks for your help.
Why not just erase the iPod and start over, using her Apple ID. Settings > General > Reset > Erase All Content and Settings, then you can start over with the initial setup of the device.
Alternatively, your Apple ID may have been entered in:
Settings > iCloud
Settings > Messages > Send & Receive
Settings > FaceTime
Settings > iTunes & App Stores
Sign out of your ID in these menus and sign in with your wife's Apple ID. -
TS4062 my ipod touch shows up in left column but i get messages like we see you but can not connect
My ipod touch shows up in the left side,but itunes can not identify my ipod.It is frozen and I can not doany tasks in itunes. my computor says my driver is good but connection test does not see a ipod . I have restarted and updated . I tried to use another computor but it says the same thing.a message about a disk comes up also. I used my ipod shuffle and it works fine! Iam going in circles trying to fix this! Help and Thanks Rileystoker
when u c the ipod under devices can u click on it?
does it show under it the following
music
flims
tv programmes
podcasts then something like
2010 music
90's music
music videos
these may not show as nothing been added or played
my top rated
recently added
recently played
top 25 played
if so simply add music, videos, etc to the ipod
it not click on the ipod tab on the top you should see
summary>apps>music>films>tv programmes>podcasts>books>photos>info>nike+ipod
you want to click on summary tab and click on the restore tab this will reset the ipod back to factory settings and let you set on the ipod again -
My new ipod touch shows up as a cannon camera.
My new ipod touch shows up as a cannon camera. I cannot upload itunes to it if my windows xp cannot identify.
Every thing was working with ipod shuffle.
Help resolve and use new ipod touch please!this usually means you either have a screenshot or a saved photo, go to the photos app and make sure that there isn't a section that is titled "Saved Photos" or "Camera Roll" if there is delete the photos from this section by clicking the picture, click it when the photo goes full screen and a menu option should pop up, push the icon that looks like a trash can and press "delete photo". Now the ipod should not show as a camera in windows
-
My iPod touch shows up as a apple iPod camera but if i dont want to download the pics and press cancel it all dissappears. my ipod has been lost for 3 months and has not got the latest upgrade.
Try:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X
Otherwise wee need more informatin. -
My ipod touch shows up as a camera on my pc and wont show up at all on itunes
my ipod touch shows up as a camera on my pc and wont show up at all on itunes
Hi
I was having the same problem for ages. I followed a apple advice section telling me to check the processes for apple mobile device manager, and check for the applusb.sys driver, and they were both there and working. I would advise you to do this. If they are not showing, then the article says to re-install itunes. here is the article by the way. http://support.apple.com/kb/HT1852
However this did not fix my problem. So I decided to try re-installing the actual driver, instead of the whole of itunes. Try this, as it worked for me
(I don't no how good with computers you are, so I'll put simple steps, sorry if it seems patronising!)
1) Go to start, and Run
2) Type "devmgmt.msc" without speech marks
3) A screen with your computers name at the top, with seperate sections for things like keyboards and moniters should have come up. At the bottom you should see Universal serial bus (usb). Expand it and look for apple ipod, or somthing similar (there's prob only be one by apple) If it's not there make sure your ipod is plugged in!
4) Right click and go to properties
5) Click the 'Driver' tab
6) You should see 'Roll back changes' as an option. Click that and accept/press yes to the prompts that pop up.
7) Wait for a few seconds (may take a min or two) until your back to the previous screen described in step 3
8) Now Under 'portable devices', apple ipod should be listed. Right click that, and choose 'Update driver software' Choose to automatically search.
9) Again wait, and when it's complete Apple iPod should show under universal seriel bus (usb) section again.
10) Exit out of device manager, and open up itunes. Your ipod should now be there. You may need to un plug it and plug it in.
What this effectivly does is re-install the device used to search for iPods by itunes. For some reason, mine and probably yours ran into problems.
Hope you found this helpful, and I'll check back later if you have any problems or questions.
Andy
Message was edited by: madworld14 -
I am running Windows 8. Although my contacts and notes from my Ipod touch show up on icloud my calendar entries do not show up even though they do show up in my Google calendar and my windows phone calendar. Any suggestions not already covered in trouble shooting articles?
As I mentioned earlier, you have to decide which calendar you want to use. You can either use Google or iCloud, but not both.
If you want to use your iCloud calendar, go to Settings>Mail,Contacts,Calendars>Default Account (in the Calendar section) and set this to your iCloud calendar. After doing so, all new events you add to your calendar will be added by default to your iCloud calendar, and as a result, will appear on icloud.com and your computer (if it is syncing calendars with your iCloud account).
If, on the other hand, you want to use your Google calendar (as it sounds like you are doing with your iPod), simply add the same Google calendar to your phone and your computer. -
http:/I'm using 4th gen IPOD touch and the wifi can't connect to my home NTWK, it sends me to a far distant IP ADDRESS and can't connect. a building public NTWK is wifi connectable, any ideas how I can resolve this WIFI issue??? TY
[email protected]Do other devices connect to your router?
What do you mean by distant IP address?
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-power off and then back on yur router
- Reset Network settings: Settings>General>Reset Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
My iPod Touch shows USB and arrow pointing to iTunes
It's a newer generation that I bought a while back, but i tried to system restore so my little brother couldn't access my vital applications that i had installed previously.
Whilst plugged in, it said that a system update and iTunes update was required. However, neither fully finished. Instead, the iPod touch shows the generic USB cord with an arrow pointing toward the iTunes symbol.
Is there anything that i can do without having to pay for it to be fixed???First get the latest version (10.6.3 ) of iTunes to install on your computer. See the following if necessary:
Trouble installing iTunes or QuickTime for Windows
The connect the iPod and restore via iTunes. Place the iPod in DFU mode and restore if necessary.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My ipod touch showing that it is. Charging the syncing symbol appears next to the device in itunes but i cant open or see the content of my device since it goes on sycing....btw i hav latest itunes
michaelfromstockton on tees wrote:
I've found an easier way, just go to settings>general>usage>music. Then swipe it and press delete, i think this deletes the database described above, then re-sync, this worked for me anyway. Good luck, you need it with Apple software.
I don't have a large library of music on my iPhone 4s since I've only had it since Oct 2012, but since the update to iTunes 11 in early December, my album artwork has been all messed up. Everytime I would try to add new music, it would assign the wrong album artwork to anything new coming in. And in addition to that, it would also mess up album artwork of music already on my phone. Everything looked correct in iTunes, but on my phone, not so much. After trying to unsynch, then synching again, my frustration level was at an all-time high. This problem seems to be everywhere online, but no concrete solution for everyone.
I finally came across your simple solution (at least for me because of my small inventory of music) of just deleting all the music through the settings, and then re-synching to add back my music. Now all of the album artwork is correct again. I'm almost afraid to add new music for fear the artwork will get mixed up all over again! I still think my issue is somehow connected to the iTunes 11 update because up until then I had no issues whatsoever. Anyway, thanks for an easy solution that worked for me. -
My iPod touch shows my podcasts "grayed out". They're there, but I can't play them. My older iPod plays them fine like normal.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all podcasts and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
IPod Touch shows plug into iTunes
iPod Touch shows plug into iTunes. I did this, it took 2 hrs. to update then tells me it doesn't see the device to Restore. I see the iPod icon in the left column under devices.
What fixes many problems in programs is to uninstall and reinstall. If you lose all your apps and music, and the problem is not fixed, I give you the right to curse as loud as you want.
-
Why doesnt my ipod touch see any wifi networks anymore
Why doesnt my ipod touch see any wifi networks anymore
OK, out of nowhere my 4th gen ipod doesnt see a wifi network. Its not grayed out I can still click the wifi to the on position but then it just stays on that screen where it should list the wifi networks and just keeps searching. I've taken it to multiple locations and still it doesnt see any wifi networks. My ipod is on the current ios version 5.1.1
Maybe you are looking for
-
HT3986 how do i install windows 7 to my macbook pro with retina display
i want to install windows and games like flight simulator onto my macbook how do i do it
-
T40 Type 2373 with a DVD - CDRW. Need to reformat hard drive and reload WIN XP and new programs. DVD will not spin to full speed. Light goes on and spins slowly in what sounds like a cyclic manner. Tried several CD's. Ejects properly. Solved! Go
-
Hiii experts... i m configuring a validation for fv60.. as the service tax is calculated through automatic posting..now there for example 3 line item created when we simulate ... but when the user enters Cost Center/BA/ Profit center manually and tri
-
Dlls are not working for me in Report server
Hi, I am using SSRS 2008 and deployed some reports to the report server. For localization purpose we are having some Dlls which need to be registered in the report server. I am using some methods from the dll. Can someone please suggest how I can reg
-
Output Server & "Read Ahead" for record type indicator files
I have a design requirement where I need to read to the end of the print file (record type indicator format) before I can complete the process of laying down the subforms. I need to lay down a subform on page one, but will not get the data element ne