Ipod Touch shows two dates and times on the sleep screen/locked screen

First off i have the new ipod touch and i got it this christmas.since a couple weeks ago on the sleep screen/locked screen(the screen that appears when you hit the button on top of ipod) it shows the current date and time but in the background of that time it also sais 7:12 January 6 2010. It has said that for about two weeks. Also i noticed that when you slide the unlock bar over you can still see the slider in the background at the original position. One last thing has been happening with the volume when listening to music. When i try to turn it up i slide the volume button to the right to make it louder and when i let got it just slides back and does not get louder. What is going on.

I had the same problem with double image of date and time and also the unlock arrow. I found out that the problem was that I had, without knowing it, taken a snapshot of my wallpaper screen and saved it back to my saved photos. When I used that wallpaper image again, there was the dual image of time and date. All I had to do was change wallpaper! Good luck!

Similar Messages

My ipod touch showing that it is. Charging the syncing symbol appears next to the device in itunes but i cant open or see the content of my device since it goes on sycing....btw i hav latest itunes

My ipod touch showing that it is. Charging the syncing symbol appears next to the device in itunes but i cant open or see the content of my device since it goes on sycing....btw i hav latest itunes

michaelfromstockton on tees wrote:
I've found an easier way, just go to settings>general>usage>music. Then swipe it and press delete, i think this deletes the database described above, then re-sync, this worked for me anyway. Good luck, you need it with Apple software.
I don't have a large library of music on my iPhone 4s since I've only had it since Oct 2012, but since the update to iTunes 11 in early December, my album artwork has been all messed up. Everytime I would try to add new music, it would assign the wrong album artwork to anything new coming in. And in addition to that, it would also mess up album artwork of music already on my phone. Everything looked correct in iTunes, but on my phone, not so much. After trying to unsynch, then synching again, my frustration level was at an all-time high. This problem seems to be everywhere online, but no concrete solution for everyone.
I finally came across your simple solution (at least for me because of my small inventory of music) of just deleting all the music through the settings, and then re-synching to add back my music. Now all of the album artwork is correct again. I'm almost afraid to add new music for fear the artwork will get mixed up all over again! I still think my issue is somehow connected to the iTunes 11 update because up until then I had no issues whatsoever. Anyway, thanks for an easy solution that worked for me.

Suggested edit to hint: Tip - Date and Time in the Menu Bar

The user tip, located here, massively overcomplicates the procedure for showing the date and time in the menu bar.
The simpler way is to do:
1. Click >System Preferences...>International>Formats.
2. Next to "Dates", click the "Customize" button.
3. Arrange the date the way you want it to appear in the menu bar (don't worry about time at this point).
4. Select everything in the date format box and copy it (⌘C).
5. Next to "Times", click the "Customize" button.
6. Select the "Medium" format.
7. Paste the time format into the box (⌘V), and customize it to appear as you wish.
8. Click OK.
That's it. No Terminal, nothing complicated.

Any chance you figured out how to do this for Snow Leopard?
I did this before, and when i migrated i could see that the change i made in Tiger, carried over, (that is there was a date in my medium clock setting) but it doesn't show in the clock in my menu bar...
Is there a fix?
Maybe Lion will bring this back... or better still offer the ability to put what we want with less complication?

Approval Date and Time of the Timecard

Hi,
In one of the reports, we require to show the date and time when the timecard is approved. Where can I find this information.
Thanks,
Ramprasad.

Try the HXT_TIMECARD_BUILDING_BLOCKS (or similar name, I may have got the name slightly wrong). This is the main table for holding the data which makes up the timecard. I think approval info is in there somewhere. This table has the concept of 'scope' and there are many records of different scopes (timecard, period, date, day etc.). Each has an approval field because part of the timecard may be approved and part may not. Also, there are a couple of summary tables which hold details at timecard and application period (applications using the data and the period of the timecard) which you may want to use.
If that doesn't help, use eTRM and see the relationships of the tables and you'll find what you are looking for.
Regards
Tim

DataMart Interface - Date and time of the transferred data

Hello,
We have a requirement to build a datamart (cube to cube) between two BW systems, using deltas; this is OK and should not present any issue. However a further requirement has arisen, requiring to provide date and time of the created files to outbound systems. I have been looking to RS* and RO* tables for finding out the details of the delta queue.
Table RSDMDELTA provides the Data Mart Delta Management: could this table be used to provide required details? Or are there any other relevant tables containing this info?
Thanks&Regards,
Begonia

Hi,
Thanks for your quick response. We are not using openhubs, but a direct cube to cube datamart - by generating the cube as exporting datasource.
Is there any equivalent table in this case?
Thanks&Regards,
Begonia

Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Subject:
Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Settings>General>International.
Set the calendar to "Gregorian". You have it set to Buddhist.

When i play a game on my ipod touch it shut down and goes to the home screen

when i play a game on my ipod touch it shuts down and goes to the home screen

This means your iPod touch app just crashed

HT5252 I tried to change my metadata date and got this Aperture was not able to adjust the date and time of the original file "01769_p_h13ajyrm4bm0944.jpg" because it is locked or you do not have permission to modify it.

I tried to change the metadata date. It changed the date on my photo, but when I checked the box that said "also change my original file", it gave me this error message.
Unable to change original file. Aperture was not able to adjust the date and time of the original file “01769_p_h13ajyrm4bm0944.jpg” because it is locked or you do not have permission to modify it.
Wassup?

What is your Aperture version? The older versions of Aperture 3 had a problem to apply Metadata changes to the original file.
If you are using the current version Aperture 3.4.5, try to repair the permissions on your Aperture library, if you have not already done so:
Launch Aperture with the key combination ⌥⌘ held down and select "Repair Permissions" from the First Aid PAnel, that will appear.
If that does not help, post back with more information on your original files - are the referenced or managed? Where is your Aperture library located? Since when do you have this problem? And what did you do directly before noticed the problem for the first time?
Regards
Léonie

Aperture was not able to adjust the date and time of the master file "2008-06-22 at 14-41-14.jpg" because it has a format that does not permit date modification.

I can't seem to find a way to update the date/time of a master file. There is a format issue but I can't seem to figure out how to correct it.
Aperture was not able to adjust the date and time of the master file “2008-06-22 at 14-41-14.jpg” because it has a format that does not permit date modification.

Can you post an ipconfig /all from the server and the DC?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

I need to get the Current System Date and time in the format

I need to get the Current System Date and time in the format
*6/24/2009 11:30:29 AM*
How do i do it ?

I seem to be saying this a lot lately.
Google is your friend.
I googled "java current date format" and SimpleDateFormat featured prominently in the results.

How change sStart and End Date and time in the Audit log ???

Install C2S BM39SP1. Work.
Go to the: https://bmserver:8009
Open : VPN Monitor | Audit log information.
Problem - can not cahnge Date and time in the Audit Log Start(End)
How i vcan do this ?
How i can get every day stat log:
login ; date_time_login ; dtae_timie_logout ; bite_in ; bite_out
Serg

Serg,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

How do I add the capture date and time to the bottom corner of a photo?

How do I add the capture date and time to the bottom corner of a photo?

Not to the bottom, that I'm aware of, but to the top right or left in Grid view or to the top left in Loupe view. It is in the View Options.

TO_DATE - How do I pass the date and time to the function

Hi,
I am writing a PL/SQL code. The code has a simple cursor,
For the criteria, I am using a column called 'created' which is a date column, and the to_date function.
I would like to pass the date and time to the to_date fuction as a parameter, date_value, as shown below.
CURSOR opty is
select a.name, a.id
from s_opty a
where a.created > to_date(date_value, 'DD/MM/YYYY HH24:MI:SS');
I've tried declaring a bind variable,
date_value date := '&1'
but no joy.
Any ideas would be welcomed.
Thanks in antcipation
Mukesh

Can this help you?
SQL> create or replace procedure sample_proc
2 as
3 cursor c1(v_value varchar2) is
4          select 'YES' from dual
5            where trunc(sysdate) = trunc(to_date(v_value, 'DD/MM/YYYY HH24:MI:SS'));
6 v_char varchar2(10);
7 begin
8     open c1('08/03/2006 11:35:20');
9     fetch C1 into v_char;
10     dbms_output.put_line('Is it today''s date?> '||v_char);
11     close c1;
12 end;
13 /
Procedure created.
SQL> begin
2    sample_proc;
3 end;
4 /
Is it today's date?> YES
PL/SQL procedure successfully completed.
SQL> If you are not very particular about the time, you can use TRUNC on both sides like :
where trunc(a.created) > trunc(to_date(date_value, 'DD/MM/YYYY HH24:MI:SS'));Cheers
Sarma.

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

I was gave an Apple iPod Touch that was disabled and I called the Apple Store and they emailed me what to do and I plugged my iPod up to the PC and now it's saying that the iPod is unable to be recognized and I don't know what to do now

I was gave an Apple iPod Touch that was disabled and I called the Apple store and they emailed me how to fix it but now when i plug it up to the PC it's saying that the iPod is unable to be recognized and I don't know what to do?

Not sure if this helps:-
The music files, were they bought from your iTunes account or did someone gift them to you after buying from the iTunes account? If they are yours you can download them again if you clear or de-authorise the ipod, it has to be done by whoever gave you the ipod to do this (the registered owner). If they were bought for you on another itunes account I don't think Apple let you use them as they are copyrighted and they don't belong to you, they belong to the person who bought them. If the music files where ripped from music cd's then click and drag them to a new folder on your desktop and have the person who gave you the ipod to de-authorise and unregister it. Then you re register it and put your files back from your desktop folder in your iTunes folder and synch. Hopefully that would work. Any files which you did not buy, I would not know how get around this, best bet is to take it to you nearest Apple Store and explain that they were gifted to you and ask how you can use them. The best way to gift music files is to buy the gift tokens and give these. Hope above helps.

Ipod Touch shows two dates and times on the sleep screen/locked screen

Similar Messages

Maybe you are looking for