Ipod Touch STILL won't work with Windows 64-bit

Argh!
So, I've read the entries about the new Itunes 7.6, and how it should work with my Ipod Touch.
I uninstalled all my previous Itunes, and Quicktime software. I then installed the new Itunes64.exe. Everything worked fine.
But then, I connected by Itouch and it says "This Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, the install the 64-bit version of Itunes."
I'm confused what the problem is. I just DID that!?! What do I need to do differently? Anyone have an idea?
Thanks in advance!

Hi,
I’ve got the new version of Itunes (7.6.1) but I still get the error where it tells me to download and install a 64-bit version of Itunes. This is just ridiculous!!! I bought my IPOD touch before Christmas and i still haven’t been able to use it!
I've uninstalled and installed itunes and all that rubbish about 5-6 times now, i've deleted everything to do with Apple from my machine and also nearly killed my machine because i messed around with the registry (that's my fault :P)
NOTE: I used IE 64-bit version to download the installer.
Anyone have a solution to the problem?

Similar Messages

BT Desktop Help still won't work with Windows 7 64...

THis has been going on for a while now. It just won't launch. Emails and screen sharing sessions have produced nothing. One phone call to a representative resuilted in them telling me that the 64 bit Windows 7 version was not available yet - but wait a week or so. I've tried the latests versions and still doesn't work althougth it works fine on Vista. Anyone else still having problems?
Waiting for a call now from level 2 support but i'm not hopeful.

Its only a diagnostic tool and has nothing to do with getting the best speed.
It can diagnose simple problems and fix them if possible, reducing the number of calls to the helpdesk
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

TS1363 "An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari

Tried to update to newest version. I got error because i didn't have this recovery program disc that was supposed to come with the purchase but it didn't and now my ipod touch 8gb won't connect with itunes and is stuck on a connection with itunes screen

I tried to update to newest version via pc. I got error because i didn't have this recovery program disc that was supposed to come with the purchase so it says, but it didn't and now my ipod touch 8gb won't connect with itunes anymore and is stuck on a screen displaying an itunes icon with a usb icon.

oke i'm not done with the whole thing, but i'm doing that right now. Most of the advice I've already read didn't work and at a certain point it said something about shutting down programs then restart. but i notice that there are some pretty important system things in that list and i don't want to mess up my pc :s i'm not a pc genius... and because i'm dutch and my pc-language is in dutch I often have trouble translating and well... i don't always understand the technical stuff in all the articles -_-

I have just brought a new ipod and it won't work with my old imac as it is running pre 10.5 software. I can't upgrade the software, so what should I do?

I have just brought a new ipod and it won't work with my old imac as it is running pre 10.5 software. I can't upgrade the software, so what should I do?

There is nothing to do, unless you buy a new computer.
Mac OS 10.5.8 or later is required.

My iPod touch speaker won't work and the headphones don't work sometimes

If I try to play a song or video without headphones it won't have sound and sometimes I can't listen with headphones either. I tried reseting the iPod and restoring it but it still won't work. Please please help. I just got it a few weeks ago and haven't dropped it or gotten it wet I have no idea how this happened

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPod touch 3G won't work after falling in water? Help!

Ok it's been 3 months since my iPod touch fell in the...toilet. I immediately put it in rice after pushing all the buttons. It was only in the water for a second. When I picked it up the screen was dim, flickering, then when black. I wiped it off and put it in rice. I left it in rice for about four days. I finally plugged it up to the charger and after 20 minutes it came on. It told me I needed to plug it up to iTunes so I did. I restored it and when it was restored I tried to slide the bar at the bottom of the screen but it would never register. So I let it die and when I charged it again it wanted me to restore it AGAIN! I've restored it about five times!! Each time the touch screen won't work and it doesn't hold a charge very well. Also every time it does it wants me to restore it. What's wrong with it and how can I fix it? Oh and the home button doesn't work.

Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
SarahAsh004 wrote:
Could an apple person help? If so, how much would it cost?

TS1538 Does Ipod Nano (3rd gen) not work with Windows 8?

I have tried all of the uninstall and reinstalls, upgrades, reset of ipod nano, etc.... Cannot get computer or itunes to recognize ipod nano. Does this device work with Windows 8?

Have you had a chance to look at this troubleshooting page? It may be of some help: What to do if iPod can't be updated because the firmware file was corrupt or not found

HP Officejet 6500A Plus won't work with Windows 10

Help!! Officejet 6500Aplus won't print with windows 10. Every aplication just spits out blank pages when you print.

I have the same issue with my OJ 6500 (network connected). And I've been just been sent on a wild goose chase to install the support assistant - which didn't actually resolve my issue. When I go directly to the drivers, it recognizes my OS as Windows 10, but doesn't give me a matching driver package to download... How/when will this be resolved? Does anyone have a workaround?If I knew that my printer/scanner doesn't work anymore I certainly wouldn't have upgraded to Windows 10. Win 8.1 wasn't perfect, but at least everything worked... Thanks for any suggestions!

IPod touch 2G does't work with Kenwood car radio anymore

Hi
since a few days ago, my iPod touch 2G does not work anymore with my car radio Kenwood KDC-W4544U.
When i connect the iPod to the radio, the radio display shows "Reading", which it normally shows for like 5 seconds. But now the "Reading" lasts forever, after 10 minutes of trying to let my radio read the iPod, i have no other possibility but listen to CD or radio...
I have already shut down and restarted the iPod, synched it, even restored it via iTunes. I also tried three different connection cables.
Is this a known problem and is there maybe a solution?
Thanks in advance for an answer

Problem could be solved by hard-resetting the radio

HP LaserJet 6L won't work with Windows 8

Good afternoon all,
Right I inherited this great little printer last year, it worked great with Windows 7 but now it wont work with Windows 8, it appears to be installed and the drivers are all up to date but when I use it to print a pile of random characters come out on the pages and doesn't stop. I've reinstalled it and installed it again and again every different way but it just doesn't work and HP says that it is compatible (there is a green tick beside it somewhere on your website). Could it be that I'm using a cable that is parallel at the printer end and USB at the computer end that is at fault?
James.

I had the same problem, and fixed it.
Control Panel - Devices and Printers
Click on "Add a Printer"
Click on "The printer that I want isn't listed"
For USB connection, choose "Add a local printer or network printer with manual settings"
Pick an existing port. I use a cable that has LPT port at one end, USB at the other end. So my choice is USB001 (Virtual printer port for USB)
Now you see the list of manufacturers and models. Before doing anything, click on "Windows Update" and let it run (takes a few minutes)
Once the update is complete and you're back to the list of manufacturers and models, select HP as the model, and select HP LaserJet 6L as the printer. Without Windows Update, it will only show "HP LaserJet 6L PS Class Driver", which causes the problem. Stick to "HP LaserJet 6L"
The rest is straight forward. Print a test page and check if it comes out right. Good luck!!

Adobe 6.0 won't work with windows 98

I bought 6.0 without reading the fine print. When I tried to install it, I found out that I need Windows 2000 or higher. I can't upgrade to windows 2000 due to conflicts with other programs I'm running. Does anyone have any ideas on how to make 6.0 work with WIndows 98, or how to get an older version of Adobe?
Thanks!

This forum is for questions or comments related to Installshield Tuner
for Adobe Acrobat, remote installations of Acrobat via SMS or Tivoli,
or the hosting of Acrobat products via Windows Terminal Services or
Citrix MetaFrame XP.
Note: Questions pertaining to the individual installation, use or
features of Adobe Reader or Acrobat should be posted within the
specific forum for the product you are using
Aandi Inston

Itunes won't work with windows 8

Itunes doesn't work with windows 8 after I install it.

See Install & Update here > http://www.apple.com/support/itunes/install/
Also see Downloading Content in the same link.

IPod touch 5g won't sync with iTunes windows 8.1

I updated to iTunes 11.1.4.62 on windows 8.1. Now my iPod touch will not sync when it's plugged in to iTunes. I've been syncing with this pc since I got my iPod no problems until now it asked me wheather I trust this pc now I want this fixed.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.

My ipod shuffle 4gen won't work with my windows 7 computer

Hi
I have a brand new ipod shuffle 4gen, it sincronizes music with my netbook but it doesn't work with my windows 7 computer. An apple assistant helped me to uninstall itunes completely and it worked for a day. Now it doesn't work again, can you help me please?
thnks

Alos try here:
iOS: Device not recognized in iTunes for Windows
Do not forget this.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Ipod Touch STILL won't work with Windows 64-bit

Similar Messages

Maybe you are looking for