Ipod touch stuck in recovery mode and will not restore. error code 3194
ipod touch stuck in recovery mode, will not restore and comes up with error code 3194, itunes is up to date, please help
Hi @rchangel - Thanks for the ideas...
Yes - it won't let you install the 32 bit version on a 64 bit machine.
I've had a cursory look at the SP1 release notes, and couldn't spot anything vital - what critical stuff do you know of in SP1?
I don't want to have to go through all the pain of setting up VM's, reinstalling iTunes, getting all my album art back in etc. (though I could, as I do have Win7 pro). I've also heard that running iTunes in Windows 7 compatibility mode might help. Can anyone confirm whether that actually works?
I think it's in Apple's gift to fix this issue, given that they say that they support Windows 7. So far I've had no feedback from a mail I sent to Apple, and the number of users reporting this problem keeps going up and up.
I want Apple to recognise that there is a problem, and then I want them to fix it.
Similar Messages
-
My ipod is stuck in recovery mode and will not restore how did i fix this?
my ipod is syuck in recovery mode and when i try to restore my ipod it will not work how do i fix this?
Hi,
Try here: http://support.apple.com/kb/HT1808.
Hope this helps!
---likeabird--- -
My 4th generation ipod touch is in recovery mode and will not restore
Everytime i try to restore my ipod it loads until there is a little bit left to load and then shuts off and itunes says that there is an unknown error (9) and can not restore. Does anyone know what that means and/or what i can do?
Hi @rchangel - Thanks for the ideas...
Yes - it won't let you install the 32 bit version on a 64 bit machine.
I've had a cursory look at the SP1 release notes, and couldn't spot anything vital - what critical stuff do you know of in SP1?
I don't want to have to go through all the pain of setting up VM's, reinstalling iTunes, getting all my album art back in etc. (though I could, as I do have Win7 pro). I've also heard that running iTunes in Windows 7 compatibility mode might help. Can anyone confirm whether that actually works?
I think it's in Apple's gift to fix this issue, given that they say that they support Windows 7. So far I've had no feedback from a mail I sent to Apple, and the number of users reporting this problem keeps going up and up.
I want Apple to recognise that there is a problem, and then I want them to fix it. -
How do i fix my 3gs that is stuck in recovery mode and will not restore?
how do i fix my 3gs that is stuck in recovery mode and will not restore?
well if it's in recovery mode, all of the data is already gone. this article mey help you get it working again: http://support.apple.com/kb/HT1808
-
HT201210 iPhone 4 stuck in recovery mode and will not restore.
My iPhone 4 randomly turned off a few days ago and wouldnt turn back on. I plugged it into iTunes which said it was in recovery mode but will not restore as error 1600 keeps propping up. Someone please help, I have tried lots of ways but none are working.
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
My iPod touch stuck in recovery mode and can not be detected by my lap top. HELP PLEASE!! Thanks
It stopped chargin and now is not being recognized by my computer, it says that the device has malfunction. It also is stuck in recovery mode but since it is not recognized by my computer it does not appear in iTunes either.
- See if placing the iPod in DFU mode will allow iTunes to see the iPod.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
- Try another cable
- Try different USB ports
- Try another computer.
- Last, make an appointment at the Genius bAr of an Apple store -
Iphone 5C stuck in Recovery Mode and will not restore
Hi there, iv'e come across what seems to be quite a common problem at the moment.
I tried to update my 5C to the latest firmware this morning and apparently something went wrong. The update was fine up until about 3/4 way through and then i recived an error message, error (12) to be specific, It now seems to be completely stuck in Recovery Mode as it continues to do the same thing when i try to restore it. Iv'e had previous iphones thta have went into Recovery mode but i easly got past this issue. Nothing i do seems to be helping it, iv'e tried restoring it about 10 times and the same error comes up every time. Iv'e uninstalled and re installed Itunes and still nothing.
other than taking it to the apple store does anyone have any advice?
(Windows Fire Wall is also turned off)
Thank you!FIRST, edit your hosts file (which was corrupted by the jailbreak process) and remove any references to gs.apple.com; delete the whole lines and save the file. If you don't know how to do this you will have to get help, and it shows that jailbreaking was a bigger mistake than you thought.
Next, connect to a USB port directly on the computer, not a hub and disconnect all USB devices that consume power or bandwidth (like USB drives).
Put it into DFU mode to restore. With the phone disconnected hold HOME and SLEEP until a black screen appears. Immediately release SLEEP and continue holding HOME. While holding connect to iTunes and continue holding. After a while (perhaps several minutes) iTunes should recognize the phone. When it does release the HOME button and hope for the best. -
IPod 4th gen in recovery mode and will not restore
My iPod 4th Gen has gone in to recovery mode and it used to say plug in to iTunes, so I do and the computer says it has detected that an iPod needs to be restored so I try and restore it, it starts but when it says restoring iPod the iPod disconnects from the laptop and an error comes up saying the restore can not be completed error 40. I have tried it on two other computers including an apple mac book and still no luck. I've tried searching the Internet for answers but nothing has helped my iPod wont even turn on anymore. I am currently in Afghan and i brought the iPod to use out here i had it 2 weeks and it hasn't worked since and I can not call Apple. PLEASE HELP!!!
Did you try everything here:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
I just tried to update my iphone 4 to the 5.01. It said that my phone backed up and started update. i went on a run and came back and my phone is now stuck in recovery mode. It keeps saying that there is an unknown error, 1. I have tried everything on the troubleshooting list and cannot figure out what is wrong! Please HELP!!!
http://support.apple.com/kb/TS3694#error1
-
Ipad stuck in recovery mode and won't restore--error code 1604
I tried to backup and update my ipad this evening and when doing so it now is stuck on the itunes and USB screen. When I connect the Ipad to the Itunes it says the Ipad is in recivery mode and to restore. I click ok and it tells me i can't restore the ipad and gives me an error code of 1604. I have no idea where to go from here or what happened. Any ideas?
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
1. Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
2. Restore and wait for error 1604.
3. When prompted, click OK.
4. Close and reopen iTunes while iPhone remains connected.
5. iPhone should now be recognized in Recovery Mode again.
6. Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
http://support.apple.com/kb/TS3694 -
Iphone 4s stuck in recovery mode and won't restore. error code 9
My iphone 4s will not start past the apple logo. When I try to restore using itunes, it will not restore, and I get error code 9. I have tried different computers and USB ports with no luck. Any other suggestions?
Hello pradacxnt,
Do you get an error code when you are trying to restore your iPhone? If you do, then check out the article below to isolate and resolve the issue.
Resolve iOS update and restore errors
http://support.apple.com/kb/TS3694
Regards,
-Norm G. -
Iphone 4 stuck in recovery mode and will not restore in itunes. HELP!
Hey Guys
I tried to jailbreak my iphone (bad idea obviously) and ever since, its been screwing up.
At first, it was stuck on the apple logo- Then I followed some videos on Youtube and it was stuck on the Pineapple from Redsnow..
NOW its stuck in restore mode (the screen with the USB and the Itunes symbol) I have tried to restore it 3 times and it gives me an error message (1604) or it doesn't even restore.
HELPP! It's been like this all day. What could I do?FIRST, edit your hosts file (which was corrupted by the jailbreak process) and remove any references to gs.apple.com; delete the whole lines and save the file. If you don't know how to do this you will have to get help, and it shows that jailbreaking was a bigger mistake than you thought.
Next, connect to a USB port directly on the computer, not a hub and disconnect all USB devices that consume power or bandwidth (like USB drives).
Put it into DFU mode to restore. With the phone disconnected hold HOME and SLEEP until a black screen appears. Immediately release SLEEP and continue holding HOME. While holding connect to iTunes and continue holding. After a while (perhaps several minutes) iTunes should recognize the phone. When it does release the HOME button and hope for the best. -
I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.
RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server. I have already tried the resetting with power swich and home button and plugging into computer but it says the "iPhone software update server cannot be contacted." I am locked out of my phone. Does anyone have any idea how to resolve this issue and get the phone working again. I will add that I am now trying to restore it on a different computer with a lower version of itunes, but the computer that it initially happened on had the updated itunes and gave me the same result ... nothing. Thanks for your help in advance.
Try going to recovery mode as described here. You may have to try this more than once to succeed.
Use the original iTunes that the iPhone synced with.
http://support.apple.com/kb/HT1808 -
HT201210 my ipod is in recovery mode and will not restore
my ipod is in recovery mode and will not restore
What happens when you try to restore via iTunes? Error message?
Maybe you are looking for
-
Parallel currency in fixed assets
Dear All, We recently intoduced Index currency in a few of our new comp codes in view of its benefit to statutory reporting in countries where system assigned local currency is not the country currency eg. Ghana - USD. Because there were other comp c
-
Scope Of ABAP Programming in the WorkFlow
Can any one tell me the scope of programming in the workflow and also the way to start it.
-
String with length 1 became 4 when nls_lang_semantics=CHAR
Hi, We are using Oracle 9.2.0.1 database with charset = UTF-8, and we have set nls_lang_semantics=CHAR. We got a problem in our java program is that for a column with char(1), after I insert a java constant 'Y', the result I get back from select is a
-
HOW CAN I CHANGE THE IDIOM OF PHOTOSHOP CC?, MINE IS IN SPANISH AND I WANT IT IN ENGLISH
HOW CAN I CHANGE THE IDIOM OF PHOTOSHOP CC?, MINE IS IN SPANISH AND I WANT IT IN ENGLISH
-
PSE 6.0 on Mac: File system not supported
Downloaded PSE 6.0 as root on 10.5.6, PPC G5 w/ Mac OS Extended (Case-sensitive Journaled) FS. When I began install, got "file system not supported." Any ideas? Thanks.