Ipod touch stuck on restore

My Ipod touch is stuck in restore mode. We have tried restoring a dozen times and nothing will happen
Any suggestions?

DFU mode is a state DIFFRENT from recovery mode, when connected ipod will not load bootstrap(apple logo) or the iOS. Most people use it for restoring and updating if itunes wont automaticly.
Your iPod become a paperweight at this point because it is difficult to do anything without restoring.
To enter DFU:
Connect the iPhone to your computer and launch iTunes
Turn the iPhone off (hold down the power button at the top of the iPhone)
Hold down the sleep/power button and home button together for exactly 10 seconds, then release the power button
Continue to hold down the Home button until a message appears in iTunes telling you an iPhone in recover mode has been detected
Restore as normal.

Similar Messages

Ipod touch stuck on restore screen pleaseee helpp mee pleasepleaseplease

my ipod touch a few days ago was fine in the morning and working then when i went to use it again it had a loading circle stuck on the screen for what felt like hours then nothing happend it wouldnt turn on or off. the next day i kept it plugged in and now it shows the usb cord and the itunes image like its in recovery mode and so i plug it into itunes but itunes says it needs my ipods password. but thats the thing i can not put in the password on my ipod because it is stuck on the itunes and usb cord screen. i tried to re put it in revory mode and tried to power it down and start it up but when the slide to power off bar shows up it wont let me slide it off . please help my ipod is my baby =[ </3

- It is unclear if you manually placed the iPod in recovery mode. Try again using:
iPhone and iPod touch: Unable to update or restore
Then connect to computer and try to restore.
- Next see if placing the iPod in recovery mode will allow a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If you can't get the iPod in recovery mode or DFU mode because you can't turn it off, let the battery fully drain. After charging for an hour, try a reset, restore, placing in recovery mode and DFU mode and restoring.

2nd Gen iPod Touch stuck in restore mode

My Friend recently gave me his 2nd gen ipod touch that he no longer uses as a gift, i decided to restore it so i could put my music on it and remove all the apps that were on there because i wanted more space for music, while restoring i came across a problem, an error message popped up and said, "The iPod "iPod" cannot be restored, an unknown error occured (2003)." i have the latest version of itunes installed and ive tried everything mentioned in the following article http://docs.info.apple.com/article.html?artnum=307219, this ipod was fully functiong before i attempted to restore it and now its stuck in restore mode and will not work at all, i do not feel like paying to talk to an apple representitive to help me with a problem that shouldn't be happening in the first place so if someone could help me here that would be greatly appreciated.

Well i had kinda the same problem. I pressed the wake/sleep button and the home button for 10 seconds. Then it shuts down. You connect it to iTunes and says this iPod was in restore mode, and continues or starts again. Hope can help!

Ipod touch stuck in restore mod after update

hi i have windows 8 release preview. i tried to update my 8gb ipod touch 4th gen and not its stuck in restore mod loop. but i have a 32gb ipod touch 4th gen that sync's to itunes just fine. ive tried the home and lock button, RecBoot to push it out of restore mod, iRecovery to push it out of restore mod and nothing works. i keep getting error 1603 and 1611. it comes up on itunes and says it needs to be restored. please help

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Also, it could be due to an incompatiblity with iTunes and the pre-release Windows 8 version.

Ipod Touch stuck in restore mode

Ipod had a black screen. Didnt do anything when on charge. Hooked it to itunes. Showed being in restore. Tried but it gets stuck with the status bar blank.
Itunes shows waiting on ipod.
WTH?
Tried restoring it on two diff. computers. One with vista and the other with XP. No luck.
I also have the newest version of itunes. Please help. This is my daughters. She would like to have it back
8G ipod touch

- Try disabling the computer's antivirus and firewall.
- try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

IPOD Touch stuck in restore loop

I allowed my ipod to download and install the new ios 5.0.1, now it is stuck in a restore loop. Itines tries to download the resotre, it gets to 3-4 minustes left, my ipod disconnects, and reconnects. I get the banner that I need to restore my ipod. Uninstalled Itunes, Downloaded and reinstalled itunes, no help.
On the ipod screen I have the itunes logo and the USB cable...tried to reset nothing.... ***?!!!

Maybe here:
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Above from:
http://support.apple.com/kb/TS3694
Next try placing the iPod in DFU mode and then restore/update.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Brand New Ipod Touch stuck in restore mode straight out of the box :(

My Daughters xmas pressy .. ipod touch brought from apple online store will not sync to any of our PC's (Vista or XP) , have latest itunes installed ,have tried restore (numerous times) , rebbots, restarts all the usual stuff but restore always fails. Any ideas folks ? Have a very disapointed teenager here at the moment. thanks

Well first just to let you know the "connect to iTunes" screen or also knows as "the usb cable pointing to iTunes" means to connect it to iTunes to initially set the ipod up. Now if you already have done this or dont get the option to try forcing into recovery mode and then restoring the ipod followed in this article. Also make sure your computer and iTunes is up to date with the latest software.
If not i would try connecting it to anther computer with iTunes 9.0.2 installed and then call Apple if that doesnt work since you purchased it from the Apple online store.
http://support.apple.com/kb/HT1414
Hope it helps!!
Message was edited by: ataylor87

IPod Touch stuck in restore. I keep getting two different error messages.

Forgive me if you've seen this question before and if it's already been answered.
I recently purchased an iPod Touch. It turns on but, you can barely see it. The Apple logo appears and then it goes straight to the restore screen. I updated my iTunes and everything and when I go to restore and update my Touch, I get two different error messages. The first one I get states "Error Message (21)." Now, when I go to unplug the USB cord and plug it back into my Touch, I hold down the Home Key. When I go back into iTunes, it starts the update, it now goes into "Preparing to restore". That's when I get another error message with the numbers "2009".
I went to the Support page and tried the troubleshooting steps but, none have been successful.
Has anyone had this problem? And if so, what was the solution?
Any suggestions/advice would be greatly appreciated. Thanks.
**Also, I never used a jailbreak. The only reason why I mention this is because no matter how high or low I search the net...every one comes up with a "jailbreak" solution. I don't even know how to go about doing that and I'm not gonna even trust myself trying either.
Message was edited by: asher11
Message was edited by: asher11

Make sure the iPod is directly connected to a high-speed USB2 port on the Mac, using the cable that came with it. Also try disconnecting all other USB devices, other than the keyboard and mouse.
Try restoring the iPod touch on another computer.
If the iPod does not restore from another computer, request repair online, make a reservation to have a Genius at a local Apple retail store take a look at it or call AppleCare.
https://selfsolve.apple.com/GetWarranty.do
http://www.apple.com/retail/geniusbar/
U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
-Jason

Ipod touch stuck in restore

I bought a used Ipod touch. It worked fine when I first had it. I tried to reset it to factory to load my music into it, and now it is stuck in recovery and won't reload. I've gone through what I think is all the possible fixes, is there anything unusual that sometimes works?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

1st Generation iPod touch stuck in restore mode.

iTunes can find iPod in restore mode, but when I begin the restore, my computer says device is unrecognized, and I just get the apple with an empty bar below until it times out. Computer says device has reported problems, but device worked before reset on older computer. 4th generation ipod works fine on my Windows 7 computer. I already tried every Apple troubleshoot I can find.

ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- https://discussions.apple.com/thread/5922457
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT1430 ipod touch stuck in restore mode. What can I do?

I have tried over and over to restore ipod touch,but itunes can't finish it do to an unknown error #1

Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

IPod Touch stuck in 'restore' mode - restore process freezes

We've got an iPod Touch that's in 'restore' mode. I've made several attempts to restore it, and it freezes during the restore. It's been restored before, but now it freezes every time. Has anyone had this problem and solved it?

- Try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPod Touch stuck in Restore mode. (I will give 2 months of person IT help)

+(I will give 2 months of IT help [windows/networks] if you solve this, 1 month if you help me- Im a IT Tech with a degree. - see profile)+
*I was trying to sync my iTouch and it blipped and everything was gone.*
*Now it is in Restore mode permanantly. When I attach it to iTunes, it recognizes iPod in Restore mode, but:*
1) If I try to use the original ( 1.7.7 ) ispw to restore ( with shift/restore), it fails at *Preparing iPod for Restore* and says *iPod can not be restored. Error [various]*
2) If I try to restore to the new (3.0) ispw it fails with *Network Time Out*
3) If I try to use the 3.0 which I have already downloaded ( with shift/restore) another error #1431 occurs during restore.
4) I can not update to iTunes 8.2 as when I try it gets to the end and then says that it can not access the registry key for 'itpc' or similar due to permissions, when I open regedit to look at these keys I also get an error saying that I cannot access the keys due to permissions. I have tried opening in admin account and still "permissions not allowed", I have tried running iTunes though admin, still the same. I also can not alter the permissions even when I am at the highest permission level.
It isnt even seen by iTunes unless I enter DAC mode. Then it askes to restore it but fails every time!
+The USB has no faults showing and I updated all of them to be sure.+
+Everything was fine before this. Running firmware 2.0 or 2.2 ( cant remember or access it ).+
+I dont want to delete the iTunes as Im worried it wont be able to install again and I will lose everything. ( and thats ALOT!)+
+I REALLY need my iPod.+ I use it for work, +I work with disabled children as my 'real job'. IT is just extra $. _All my contacts, emailing etc is trapped now in a iTunes that just refuses to work_.+
As this is SO important to me and the children I work with I am offering:
*THREE MONTHS OF PERSONAL TECH ASSISTANCE FOR WINDOWS AND/OR NETWORKING PROBLEMS FREE OF CHARGE. ILL GIVE YOU MY EMAIL AND IM AND WILL BE YOUR PERSONAL IT GUY FOR 3 MONTHS IF YOU CAN FIX THIS! IF YOU CAN EVEN GIVE ME A USEFUL IDEA, ILL GIVE YOU 1 MONTH OF FREE HELP! PLEASE HELP ME IF YOU CAN!!!*

What type of security software suite are you running on your Vista computer? If it is one of the commercial ones, Norton, Mcafee, or the like, you are most likely suffering from the over zealous nature of these programs.
Are you sure you have top level admin access on your Vista computer. The fact that you can't use regedit to remove keys bothers me somewhat. But this is something for you to worry about. Here's what I would suggest you do:
1. Remove all Apple software from your computer - iTunes, QuickTime, Apple Mobile Device Services
2. Reboot
3. Disable your firewall and virus checker.
4. Download and install the latest version of iTunes.
5. Re-download the 3.0 update
6. Plug your iPod in and install the 3.0 update
If everything is working, then you can re-enable your virus checker and firewall software.
The most likely reason you have had all of these problems is the fact that Apple software needs to "phone home" during the firmware install. If it can't do it because of your firewall, then you are going to get various error messages and no success. The anti-virus software often prevents complete downloading of a file - again leading to errors.

Ipod touch stuck in recovery mode and will not restore. error code 3194

ipod touch stuck in recovery mode, will not restore and comes up with error code 3194, itunes is up to date, please help

Hi @rchangel - Thanks for the ideas...
Yes - it won't let you install the 32 bit version on a 64 bit machine.
I've had a cursory look at the SP1 release notes, and couldn't spot anything vital - what critical stuff do you know of in SP1?
I don't want to have to go through all the pain of setting up VM's, reinstalling iTunes, getting all my album art back in etc. (though I could, as I do have Win7 pro). I've also heard that running iTunes in Windows 7 compatibility mode might help. Can anyone confirm whether that actually works?
I think it's in Apple's gift to fix this issue, given that they say that they support Windows 7. So far I've had no feedback from a mail I sent to Apple, and the number of users reporting this problem keeps going up and up.
I want Apple to recognise that there is a problem, and then I want them to fix it.

I have an 1st Generation Ipod Touch stuck in recovery mode.

I have an 1st Generation Ipod Touch stuck in recovery mode. Error message shows "The Ipod "Ipod" could not be restored. An unknown error occurred (1). No back up.

ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- https://discussions.apple.com/thread/5922457
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Ipod touch stuck on restore

Similar Messages

Maybe you are looking for