Ipod touch stuck on virtual shutter and camera button greyed out

When I go to the camera, the virtual shutter appears closed and the camera button is greyd out.  I've shutdown and resynched and nothing is working.  Please help.

Try to Reset your device:
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).
If that doesn't help, you'll need to Restore your device. It's in the user guide.

Similar Messages

  • I recently reset my iPod touch 4th gen. (holding power and home buttons at the same time.)  now it won't let me change my wallpaper, in the photo section or the settings. Any ideas, please? Thanks.

    I recently reset my iPod touch 4th gen. (holding power and home buttons at the same time.)  now it won't let me change my wallpaper, in the photo section or the settings. Any ideas, please? Thanks.

    What happens when you try to change them?
    Try:
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • I have a white screen and i tried rebooting the ipod touch by holding the home and sleep button simoltaneously but it still jus tappears white. i also attempted to connect my ipod to itunes but my itunes wont even recognize my ipod touch 4g

    i have a white screen and i tried rebooting the ipod touch by holding the home and sleep button simoltaneously but it still jus tappears white. i also attempted to connect my ipod to itunes but my itunes wont even recognize my ipod touch 4g. What should I do now?

    Just let the battery drain until the screen shuts off. When you charge it back up it should boot up normally.

  • Itunes showing all data as other and sync button greyed out

    Itunes showing all data as other and sync button greyed out.  I have downloaded and installed Itunes 11 (multiple times) and restored my phone twice already, but I am still not able to sync my Iphone 4 with Itunes.
    When I select / de-select Apps on Itunes to remove from the phone the "Apply" button does appear, but after I click it nothing happens.  Then the greyed out "sync" button just appears again.
    Anyone with some advise please?

    Try Restarting or Resetting your touch.
    Restart: Hold the Sleep/Wake button until the red slider appears and turn off your iPod. Press the sleep/wake button and hold it until you see the Apple icon.
    Reset: Hold the Sleep/Wake button and the Home button at the same time. The red slider will appear first, keep hold everything until you see the Apple icon. Release the buttons.
    Check your iPod and see if your music and apps have reappeared. If they do after either option, then resync your iPod.
    If neither works, then Restore your touch through iTunes.

  • Ipod touch stuck in recovery mode and will not restore. error code 3194

    ipod touch stuck in recovery mode, will not restore and comes up with error code 3194, itunes is up to date, please help

    Hi @rchangel - Thanks for the ideas...
    Yes - it won't let you install the 32 bit version on a 64 bit machine.
    I've had a cursory look at the SP1 release notes, and couldn't spot anything vital - what critical stuff do you know of in SP1?
    I don't want to have to go through all the pain of setting up VM's, reinstalling iTunes, getting all my album art back in etc. (though I could, as I do have Win7 pro). I've also heard that running iTunes in Windows 7 compatibility mode might help. Can anyone confirm whether that actually works?
    I think it's in Apple's gift to fix this issue, given that they say that they support Windows 7. So far I've had no feedback from a mail I sent to Apple, and the number of users reporting this problem keeps going up and up.
    I want Apple to recognise that there is a problem, and then I want them to fix it.

  • Firefox 8 and 9beta. Back and Forward buttons greyed out. Right click menu also has forward and back greyed out. Updated all plugins, then disabled all plugins and extensions and started in safe mode. No change.

    My forward and back buttons are greyed out after update to Firefox 8. Tried to move to 9 beta, but same behavior. Back and Forward also greyed out in right click menu.
    Attempted to fix by updating all plugins and extensions, then disabled all plugins and extensions, and then tried to start in safe mode. Nothing worked.

    You could have backed up your profile folder. If you did, [[Recovering important data from an old profile]] can help :)

  • Forward and back buttons greyed out, no forward or back available in right click menu either

    After upgrading to the latest FF14 the forward and back buttons and menu versions of forward and back are greyed out.
    Tried the sqllite check and it says all my databases are fine. Tried safe mode, same thing. Tried a new profile, same thing.
    Any other suggestions?

    You could have backed up your profile folder. If you did, [[Recovering important data from an old profile]] can help :)

  • My iPod touch stuck in recovery mode and can not be detected by my lap top.  HELP PLEASE!! Thanks

    It stopped chargin and now is not being recognized by my computer, it says that the device has malfunction. It also is stuck in recovery mode but since it is not recognized by my computer it does not appear in iTunes either.

    - See if placing the iPod in DFU mode will allow iTunes to see the iPod.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    - Try another cable
    - Try different USB ports
    - Try another computer.
    - Last, make an appointment at the Genius bAr of an Apple store

  • IPod Touch Stuck on Apple Screen and iTunes won't recognize

    I was resetting my ipod touch to clean it off to give to my sister. I thought it was plugged in, but turns out it was not, so the battery died while it was resetting itself. Now it is stuck on the apple screen. I have tried everything to reboot it and get iTunes to recognize the device, but nothing has worked. I had my computer cleaned, so iTunes is brand new and has never been hooked up to this iPod Touch. I need help please!!

    TRy placing the iPod in DFU mode and then restoring. See:
    http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

  • IPod Touch stuck in recovery mode and not detected in iTunes

    I was trying to update my iPod Touch (currently 3.1.3), so I downloaded the 4.3.3 firmware (I didn't want to download the 4.3.5) and connected my iPod to my computer, opened iTunes and hit Shift+Restore. Then, I chose the 4.3.3 firmware and proceeded with the restore.
    However, the following appears:
    Error 1602
    I pressed OK and the restore process stopped. But, my iPod is stuck in recovery mode. Every time I reboot it, the recovery mode shows up. It's also not detected in iTunes although my computer recognize it as iPod Touch Recovery Mode.
    Please help me solve this. I can't use my iPod.

    Error 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Above from:
    http://support.apple.com/kb/TS3694
    Also, when updating/restoring an iDevice, iTunes contactact the Apple sever to verify that you have the latest iOS version.  If not, it will not allow an install if an earlier version.

  • IPOD TOUCH stuck in recovery mode and cant restore

    My ipod touch is stuck in recovery mode and wont restore when i turn on my ipod it says connect to itunes so i then connect to itunes it then notifies me that im in recovery mode and to get out i need to restore I go on to restore it extracts the software it starts restoring and about a quarter done it just stops it doesnt give me a error code it just stops someone please help me

    Temporarily disable your firewall and antivirus software and try again...
    See here for Connection Issues
    http://support.apple.com/kb/TS1379
    From Here
    http://www.apple.com/support/itunes/troubleshooting/

  • My ipod touch stuck in recovery mode and itunes doesnt reconize ipod what can i  do?

    my ipod stuck in recovery mode itunes dont reconize or show device and i dont have access to orginal computer what can i do to solve this problem

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • IPod touch stuck in a loop and won't charge

    My iPod touch was left overnight with a full battery and was down to 20% in the morning. I've since learned that this is due to my ipod being connected to the wifi all the time.
    However, when I connected my ipod to my laptop to charge it up again, it started looping the same 2 screens repeatedly and just won't charge.
    First it shows the screen illustrating that there's no battery left and the ipod needs to be charged, then the loading screen (the white Apple logo) appears for about a minute before the ipod shuts off again. This loop doesn't end no matter what combination of buttons I press, and disconnecting it from the laptop just shuts it off again. If I try turning it on, it just tells me there's no battery.
    Any thoughts on what I should do with this? Thanks in advance

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • IPod touch won't turn on and home button isn't working

    So two days ago I was using my iPod and I put it town for a few minutes, and when I came back it would not turn on. It was fully charged so it is not a battery issue. It's a iPod touch 5th gen. Usually when this happens I do the home and power button press but now my home button doesn't work. I don't know what happened to that either because it suddenly stopped working. I tried to use TinyUmbrella and Macboot (or whatever it's called) but they didn't work because they didn't recognize my device. Is there any other way to fix this? Or any way to get the home button un stuck?

    Turn on without Home/Power Button

  • IPod Touch 3G in DFU Mode and won't come out

    Hello,
    My daughter's iPod Touch 3G appears to be in DFU mode, but won't come out. The screen is completely black, and when I attach it to the computer, it comes up with the message "iTunes had detected as an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." When I hit the restore button, I receive the error message "software for this iPhone is not currently available. Make sure you have the latest version of iTunes and try again."
    I've seen this message posted several times in the forum, and I have tried all the troubleshooting tips offered by Apple Support and in the answers to some of the questions. I am a Systems Engineer, so I consider myself pretty technically savvy. These are the steps I have followed so far:
    1) Completey removed and reinstalled iTunes according to the instructions provided by Apple.
    2) Downloaded the firmware for both the 3G and IOS4 from http://www.felixbruns.de/iPod/firmware/ and attempted a manual install - when I do this, I receive the error message, "the iPhone "iPhone" could not be restored because the firmware is incompatible"
    3) Downloaded RecBoot to attempt to exit recovery mode, but it does not appear to be detecting the iPod.
    4) Attempted to exit and re-enter DFU mode several times to no avail.
    5) Called Apple Express Lane and was willing to pay the 1 time phone support charge, however the agent told me that he could not help me, and that I needed to take the iPod into an Apple store (the iPod is 190 days out of warranty).
    My last effort is to try the install from another PC. So, prior to taking the iPod into the store, I was wondering if anyone has had any success other than the steps I have tried above. I'm appreciative for any assistance anyone is able to provide.
    Message was edited by: kander1625

    Check the model number on the back, "A1318" = 3G, "A1288" = 2G. If it truly is a 32GB 3G Touch, then you're going to have a rough time going back to an iOS version earlier than the current release (4.3.1, available from iTunes). The iOS packs you get from the site you mention are not "signed" and you probably won't be able to install them ... I think 2G owners have better luck with those "unofficial" versions.
    So, if you have a 3G, your best bet is to erase (or move) all earlier iOS versions and let iTunes download a fresh copy of 4.3.1 for the iPod -- no need to go to a 3rd party site. If you have a 2G, then the latest version you can install is 4.2.1, which is also available from iTunes. To increase your odds of this working out, you might temporarily disable any AV software and firewall(s).

Maybe you are looking for

  • Magnify effect in photo gallery, need help...

    Heya, So if you visit http://www.hookmedia.biz/cabinet_source/v4_f and navigate to the "Gallery" page you'll see that, below the area the large photo is displayed, there is a "film strip" of thumbnail photo's. I need these photos to be magnified when

  • Calling a method in a tab from the main window.

    I came into this project and I don't fully understand why I can't do what I want to do. The previous writer creates a main GUI that looks like a normal Windows Application with the menus and things. Then inside he has tabs to navigate to the various

  • Out of control fan

    A fan in my pc starts running full speed at random.  It does not matter whether I am using the pc or it is just sitting and running.  Any ideas on how to stop this?  Noise is loud enough to interfere with phone conversations.  Is there a fix?  Thanks

  • Weblogic Script to grantAppRole

    Hi, I am using obiee 11.1.1.6.8 and authentication of two Active Directories. Users from both the directories can login to OBIEE. When I try to grantAppRole from weblogic script (wlst) to a user from AD 1, that works fine. If I try to grantAppRole to

  • Condition Limit  per material group

    Hi all, This is Puneet here, I have a requirement from  customer to control manual changes for a condition type with sum tolerance % that is based on the material group. However i can maintain upper limit or lower limit for a condition type but that