IPod touch top front of my screen says, "it Safe Mode". What does that mean?
Front of my screen says, "it Safe Mode". Now when I try to change my theme in Winterboard and respring it wont change anything. What do I do?!?!
Touch where it says "It Safe Mode". A Window should appear informing you about the Safe Mode. At the bottom, hit "Reboot" and wait.now your iPod will funtion as normal again.
If not, then go to Cydia and delete anything you just installed, as it may be the cause of the Safe Mode. Then try rebooting again the iPod.
Similar Messages
-
In Numbers, I can see my documents but they have the top right corner turned over with a down arrow, what does that mean? I touch it and nothing happens.
I have recently done a full restore because my iPad and iPhone were mis-behaving and wouldn't work they way I expected with Windows XP and Outlook 2003 and now when I check iCloud.com, all my documents are gone, yet my iPad hints that they may still be somewhere but where are they?That is the orientation lock symbol, you can not go to landscape orientation. Tap the home button twice, swipe the task bar to the right, tap on the 'circle' icon at the left to unlock the orientation. You will then be able to view items in portrait and landscape mode.
-
I sent my iphone 4s off to be repaired and I checked the status of the Repair and it says 'Product replacement pending' what does that mean please?
Where can I find the number to call and see when I will get my phone back?
ThanksMeeshieBaby wrote:
it says 'Product replacement pending' what does that mean please?
Apple does not fix iPhones, they replace them if covered by warranty. That means you'll be getting a refurbished unit. -
Hi my ipad has been blocked and is saying go to itunes what does that mean and what do i do
hi my ipad has been blocked and is saying go to itunes what does that mean and what do i do
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808 -
When I call someone who is also on Verizon it says, "All circuits busy" what does that mean?
Thanks for reaching out to us. I'm sorry you had problems contacting your friends/family.
There are normally a couple of reasons you would hear that particular message.
1.If the announcement is received when calling one specific number the issue is with that device's service provider. They would need to contact their provider and do an investigation.
2. If the announcement is received when ANY number is called the issue is with the Verizon Wireless network. At that time, we we need to open a remedy ticket (which reports it to our engineers to investigate further).
Tamara H.
Follow us on Twitter @VZWSupport -
On my iphone 5 near the front camera theres a tiny red dot on what does that mean
On my iphone 5 near the front camera theres a tiny red dot on what does that mean
It is probably one of the proximity sensors or the auto brightness sensor.
-
when Macbook pro- sudeenly stops working on wireless and says there is no hardware installed- what does that mean. I tried to click turn wirless on and it says no hardware installed.
ThanksReset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best. -
My airport says self assigned ip. what does that mean?
My situation is I am able to connect to the wifi at work and everywhere else, but for the last 3 weeks I am not able to connect to the wifi at my house. When I do it says airport has self assigned IP what does that mean ? and how do you fix it ??! I tried everything almost possible.
It means, you had better power-cycle your modem.
-
hello all,
i normally shop on my ipod touch (because frankly i cant be bothered to plug it into itunes then shop! ) to shop for apps and song and etc. and because i have a wall charger in my room theres pratically no need to go the computer! so sometimes when im on the computer i want to use my ipod touch as well so i charge it on the pc.
well to cut the story short everytime i want to shop on itunes it comes up with this note that says "your ipod is synced with a different pc etc" then it comes up with erase and sync? so my question is what does syn mean? because im worried if i choose ok it would get rid of all my apps
- someone help me!- It means what it says. Your iPod is synced with a different iTunes library. To transfer purchases to this computer:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- If you want to make this computer your syncing computer see ths previous discussion:
https://discussions.apple.com/thread/3362492?tstart=0 -
Screen says Activation Failed. What does this mean?
It says on the screen that activation failed. What does this mean?
It is not properly connected to the network.
Make sure DNS is set to auto (settings - general - network)
If on wifi try ethernet
Make sure router has port 123 open (refer to manual if unsure) -
what does "16bit" mean? millions of colors?
What is the "bit" spec for my mac book pro? - the specs only say "millions of colors"!
thanks!These will help explain "what does "16bit" mean? millions of colors?"
http://en.wikipedia.org/wiki/Color_depth
http://www.astropix.com/HTML/J_DIGIT/MON_RES.HTM
http://etc.usf.edu/techease/mac/images/what-is-bit-depth/ -
My ipod says it cannot be used because the apple mobile device service is not started? please someone tell me they know how to fix this.
Try:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
Wre54g Setup... Says Survey failed? what does that mean?
Ok I just bough a Links Wre54g and Im SO lost. We got it to expand and boost our wireless so my Husband can play his xbox live with a better signal but while trying to set it up I got so confused I almost gave up till I found this.
Heres how it started
1. plugged in wre54g
2. put in Disc for setup.
3. pressed and held auto config button like it told me to do.
4. only ONE blue lite. other was blinking red and blue.... Confused
5. looked online for help.
6. did what it told me. Plugged ethernet cable into it. Both lights are now blue.
7. started disc. and hit setup.
8. it started its site survey........ the STOPPED. it says "site Survey Failed. try again."
9. Tried again...... and again...... and again. each time same thing "site survey failed. try again"
10. Got REALLY pissed and stomped around house for 30 mins. *lol*
Now Im here and STILL dont know what to do. I tryed the static Ip... Nothing. I tryed reset.... NOTHING.
PLEASE HELP ME. IM GOING INSANE.
the guy at the store said I might need the WRE54N not the WRE54G.... NO idea what he ment. but I have 13 days to figure it out so I can exchange it for the N if I need to . Plz help me stay sane what do I do.
Arowolf
Arowolf Longpaw
Solved!
Go to Solution.Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your Expander, wait for 30 seconds and re-connect the power cable...
1. Connect your Expander to a computer, click on the Start button >>> Settings >>> Control Panel >>> Network Connections - Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0...Click on Ok button to Save and Click on "Close" on main Properties window...
2. Now open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.240.
Leave the Username blank & in Password use admin in lower case...It should open your Expander set-up...
3. Once you get to the set-up page you can follow this link to change the Expander Settings...
NOTE : The link also explains to check the Wireless Settings on your Router...
4. While changing the Expander settings you have to make sure that the Wireless Settings(SSID/Network Name and WEP/WPA Key) are identical on both the devices(Router and Expander)...Also make sure to change the Expander's default IP to match your network and Gateway Address should be your Router's address...ex. Expander's IP Address : 192.168.1.240(assuming your router's default IP Address is 192.168.1.1), Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1...
5. After configuring the Expander you should disconnect it from the Computer and go into Local Area Connection TCP/IP Properties and set it back to Obtain IP Address Automatically...Disconnect the Expander from the computer and power cycle both the devices(Expander and Router)...Your Expander should be configured... -
What other options are available if your iphone is lost/stolen but it registers as "offline" on find my iphone location services? I imagine if I suspend the services, this eliminates the "find my iphone" features. Feel at a loss here. Anybody have any other information to share on this topic? Thanks.
You can put it in lost mode, which will be executed when it goes back online, if it ever does. See http://support.apple.com/kb/HT5668.
-
Somebody please help me! Everytime I try to sync something, it says error (13019). What does that mean? And what can I do to fix it?!
Type "13019" into the search bar at the top of this page by "Support" and see for yourself.
Maybe you are looking for
-
Block Planning Display block options eg Percent of block utilised and Qtys?
Any hints how to display block quantities and percent utilised in PPDS area? I have managed so far to get the following for blocks that cross between months. 1. Resource table. (/SAPAPO/RPT - Resource Planning Table )Can highlight both columns that t
-
Could someone help me with this? My Apple TV (V 3.0.1)was working fine with iTunes (V9.0.1.8)and all of a sudden, after a sync it erased music from the ATV and refuses to re-sync it from my PC to the ATV. I´ve re-started the ATV (even going to the fa
-
please help problem with importing a file error output "there was an error decompressing audio or video"
-
It takes 1+1 starts (the last time) or 111 before and 11+1+1+11 another. But it will start up and it run well in 10.4.8 sometimes it crash (lately since the problem start never before) but other wise runs good. I have looking into your other similar
-
Can an Envy 7640 printer be used with a Google Chrome Operating system?
Can an Envy 7640 printer be used with a Google Chrome Operating system?