IPod touch wheel and iPod software version 1.5

Hi,
I have a problem with my iPod touch wheel (20 GB).
I have purchased some music on the iTMS this days, but i was unable to transfer it to my Ipod, which software version was 1.4.
So, I decide to restore the iPod with the latest version for this model, i.e. 1.5, and to upload all the songs, using the automatically update option.
I did it, but after uploading the music, all the playlists are empty (menu "playlists", "artists", etc...). I can't see any songs although the indication of size is correct.
But, everything seems normal when I access the iPod by iTunes (version 5) : I can see and play all the playlists on the iPod, when I have deactivate the automatically update.
So, I restore again the iPod, and transfer manually some playlists. I was able to browse them on the iPod, and listen to them.
I'm using iTunes 5, on Mac OS X 10.4.2.
Has anyone had the same problem ?

Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

  • Ipod generation 1, updated ipod software version 5.1.1 and now my ipod is dead..

    I have an ipod generation 1 since 2005 and it works perfectly till yesterday when i receive a prompt from iTunes store (after my last login 6 months ago) reminder/alert to update my ipod software version to 5.1.1 in which i did and just after i updated the software my ipod went dead..
    The message appeared "Please Wait..Very low battery.." However, when i plug it into adapter charger i'll see the normal screen, but the message appear when i use the cable to connect to my lappie....Urgent help! Thanks.

    You need to continue with the Recovery...
    Once the Device is in Recovery Mode... it is too late to save anything...
    To minimise loss... After the successful Recovery... Restore from the most recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • Downfalls of iPod Software Version 1.2???

    What are the downfalls of iPod Software Version 1.2?

    This is in regards to the iPod software 1.2 on the older 5th generation iPod Video.
    1. Clicker problem not solved -- unlike the iPod Nano, the Clicker settings are On, Off, Clicker, Earphones. On the iPod Video, it's only On or Off.
    2. No search function
    3. The "floating" alphabets when scrolling quickly down the Artist or Song list is only worthwhile for languages in Alphabets. This display method does not work for Chinese, Japanese, Korean, and a multitude of other non-Latin alphabet languages.
    4. iCal problem not fixed. iCal has a location field. This location field does not transfer to the iPod. This is a problem for those of us who put the meeting place in the "location field".
    That's it from me so far.

  • Cannot download iPod software version 1.1.1

    Hi there,
    Since days I try unsuccessfully to download the iPod software version 1.1.1 for my brand new iPod nano 8GB. I allways get an "unknown error -23" after having connected to the download server. My internet connection is absolutely fine.
    Any suggestions how to get the latest software version?
    Thanks!
    iPod Nano 8GB   Windows XP  

    Okay.
    I don't think you're getting this error message, but try these steps anyways...
    http://docs.info.apple.com/article.html?artnum=304468
    btabz

  • Update ipod software version 4..3.5 fails

    update ipod software version 4..3.5 fails

    Abit more information is needed so we can help you more.
    What OS are you running on
    What is the error message displayed if any,

  • Touch wheel and buttons don't work

    Touch wheel and buttons dont work. Ipod works with my Alpine car stereo, while using the stereos selector wheel. Sometimes the Ipod tries to work normally, but the buttons still won't work.

    You might want to try the five R's
    iPod Issues?
    These five steps (known as the five Rs) will conquer most iPod issues.
    1. Reset your iPod.
    2. Retry with a different USB port.
    3. Restart your computer.
    4. Reinstall iPod and iTunes software.
    5. Restore your iPod.
    If none of these work, the easiest thing to do is go to the "great" Apple store they know everything overthere.
    DELL 4600   Windows XP   Apple iPod, 5G, 30GB, white

  • Trying backup and install software version 7.0 Bundle 2416

    I can't help but have the same problem trying backup and install software version 7.0 Bundle 2416?   Anyone got any ideas - my 9900 is now completely unusable and is stuck on "Backing Up Your Data"!!

    Hi and Welcome to the Community!
    RIM is constantly changing, due to many many reasons (some of which are licensing), the compatible PIMs for the Desktop Software. I've no idea what prior version supported CardScan, but the current KB regarding compatibility is here:
    KB12268Applications supported by BlackBerry Desktop Software for Windows for synchronization
    You can find some older versions of the Desktop Software in this archive:
    http://www.blackberryforums.com/rim-software/253387-archived-rim-desktop-software.html#post1744114
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Certain apps will not install on my iPod touch 1G due to software version

    I bought an iPod Touch 1G off a friend recently. When I got it off him, it had several versions of Angry Birds which all functioned perfectly. Since having to erase all the data and the apps on the device in order to sync it to my computer, I don't seem to be able to install Angry Birds at all and when I try, I get an error message saying I need to update the software version to iPhone 4.
    According to my iTunes it is currently on the latest software version which is 3.1.3.
    I don't understand why I can't install applications that were working fine before I synced the device to my computer. Could it be some cross-platform issue between my friends Mac and my Pc?
    If anyone has a solution, I would be grateful as this is getting frustrating.

    First of all, the 1st generation Touch can only instal and use up to iOS 3.1.3, even though there are later versions of the iOS available for newer iPod Touchs. The 1G simply isn't capable of using iOS 4.
    As for Angry Birds, there appear to be six versions available (in the UK store), three are paid for and three are free. However, of the three free versions, two require iOS 4.0 or higher to run. So the versions installed on your iPod when you bought it must have been paid for or Angry Birds Lite. I assume therefore that you have been trying to instal Angry Birds Free and Angry Birds Rio Free, which both require iOS 4.0.
    I have no idea why there are six different versions or why some require a higher version of the software than other versions.
    So either try installing the Angry Birds Lite or buy one of the other versions. Be aware though, that if a version you buy then gets updated and subsequently requires iOS 4, it will be removed from your Touch (as it will not work).

  • Deleting and syncing videos / iPod software version

    Two questions:
    1) I have videos downloaded through iTunes on my computer and synced on my iPod. They are taking up way too much space on my computer's hard drive, though, and I was wondering if I delete them from my iTunes Library and off my computer, will they remain on my iPod the next time I sync?
    2) I have an outdated version of iPod software. How important is it to have the most current version?

    1) I have videos downloaded through iTunes on my computer and synced on my iPod. They are taking up way too much space on my computer's hard drive, though, and I was wondering if I delete them from my iTunes Library and off my computer, will they remain on my iPod the next time I sync?
    No, if you delete from the library and sync then they will be deleted. You could either switch to manual managment of your iPod or you can remove the physical files from your computer while retaining the entries for them in the iTunes library. When you try to sync again iTunes will report that it cannot sync certain files as they cannot be found, but it should leave the previously synced files on your iPod. You can disable the warning if you choose. You will still be able to add new videos onto the iPod by adding them into iTunes, then syncing. You can also remove items you no longer want on the iPod by deleting their library entries. I would stress, however, that this method should be avoided if it results in the iPod containing the only copy of a particular file because the iPod could easily be lost, stolen or need restoring at some point. When (and not if!) you restore your iPod, you will lose all the files on it. For this reason a better appraoch would be to get an external drive to hold data you don't want on your main computer & sync from that.
    2) I have an outdated version of iPod software. How important is it to have the most current version?
    Only really matters if there's a new feature or bug fix which affects you. Since Apple don't publish a list of bug fixes it can be hard to tell. Me, I'm all for the latest version but others are more cautious. Horror tales of "the update bricked my iPod" are common enough on here, but you don't generally hear the voices of happier users so I wouldn't worry too much.
    tt2

  • Should iTunes version and iPod software version be the same?

    My iTunes is version 7.6, but my iPod software is version 1.1
    Should they be the same?

    No, they are not the same. If you have a 1st Generation Shuffle you should have firmware 1.1.5. If you have a 2nd Generation Shuffle it would be 1.0.3.

  • Problem updating iPod software (version 1.2)

    I'm trying to update my video iPod (30GB) with the latest software (version 1.2) through iTunes, but I get the following message:
    "The iPod cannot be updated because it contains files that are in use by another application."
    I've tried restarting the computer and resetting the IPod, but still get this message.
      Windows XP  
      Windows XP  
      Windows XP  

    I had the same problem (before I bought my Mac). Apple hides the fix pretty well. It can be found here: http://docs.info.apple.com/article.html?artnum=304468. Hope this works for you!

  • Ipod Software Version 1.1.2 has rendered Ipod useless

    I've had troubles with new Ipod software every time I install it, I don't know why I installed another new crappy update that gives me nothing but pain and agony but here I am.
    I have a 5th generation 160GB Ipod that has worked just fine and dandy up until today when I updated it to version 1.1.2. Now it tells me i need to restore my Ipod and when I do this, it goes through the restore process then tells me I need to restore my Ipod AGAIN! I've been through this neverending cycle at least 20 times. I've tried the new version, the old version. I've tried the 5 R's, I've restarted my computer twice. And still it continues in this same incessant loop.
    Help?

    I am having the same exact problem! it comes up with a cannot read contents of ipod. restore... blah blah blah, we all get it. it will freeze up my itunes and other programs if i try to open them when it is plugged in.
    I do not suggest sending it in for service. i did and they just sent it back to me telling me that nothing was wrong with it and they charged me like 60 bucks. that made me so mad.
    Stupid itunes 7.6 is just crap.
    I hope they fix it soon.

  • Updating to ipod software version 1.2.1.

    I have just bought a new ipod (5th generation) and am prompted to update to version 1.2.1., when synchronizing with my computer. However, despite having no internet connectivity problems for anything else I get the following pop up message.
    'Itunes could not contact the ipod software update server because you are not connected to the internet.
    Make sure your internet connection is active and try again'.
    Can anyone suggest how I could solve this?
    Many thanks,
    Julian
    ipod 5th generation   Windows XP   HP compaq nx6110
    ipod 5th generation   Windows XP   HP compaq nx6110
    ipod 5th generation   Windows XP   HP compaq nx6110

    I had the same problem (before I bought my Mac). Apple hides the fix pretty well. It can be found here: http://docs.info.apple.com/article.html?artnum=304468. Hope this works for you!

  • Which iPod software version ?

    Hi,
    I just bought the Nike+ iPod, was very excited to use it this WE, but didn't manage to make it work !! It seems that the receiver does not detect the sensor. My iPod nano 3rd gen is running on the iPod sotfware version 1.1, and iTunes says that this is the latest version. But on the user guide of the Nike+ iPod it is said that the iPod should run with the latest iPod software, which is 1.2
    Who should I trust ?
    Which version of the software is running on your iPod ?
    Thanks for your help, Alexis

    Hi,
    Me again ! I went back to the store and found the solution : when you look in details to the config requirements, there are not all the same. If you want to use the Nike+ sensor with a 3rd generation iPod nano, it should be stated on the package : "requires iPod nano with software v1.3 or iPod nano (aluminium) with version 1.1 or later". It seems that the first I get from the store was from an older stock. With a recent one, it works perfectly.
    By the way, I now know the distance from my favorite sport shop to my office !
    Cheers, Alexis

  • Recommended WCS and WiSM software version?

    Currently I have a few WiSM blades and a WCS. I was thinking of upgrading to newer code and was looking to see what the latest stable code is.
    The current WLC version is 4.2.112 and the WCS version is 4.2.81.
    Thanx, Seth

    Seth,
    I have only deployed 4.2.130 and have no issues. 5.0 is not recommended and 5.1 is too new. 4.1.173 just came out and states that it fixes issues with 1250 ap's, but if you don't have 1250's then I would say 4.2.130 since you are already on the 4.2 code. I have deployed 4.1.185 on WiSM's and standalone wlcs when I do not have 1250's in the environment. But again, you are on 4.2 so just stay on 4.2.

Maybe you are looking for

  • NO WIFI Displayed on iphone 4s

    I have this problem for more than one week,,,,I tried all suggestions  but nothing happened,,now I am looking for service store here in Israel but it seems they dont have here to repair it,,,,what advice you can give me............thanks

  • Dual G5 1.8 refuses to sleep

    The computer will not go to sleep. When I try to force to sleep it enters sleep for a second and immediately wakes up. Screen seems to go to sleep OK. However, when computer wakes up it wakes the screen too. I tried all the suggested solution includi

  • [Crystal Report 13.0.2000.0 & VB 2010] - Database connection from VB Code

    Hi, i want establish a connection between report and MsAccess database using source code in VB .NET 2010 listed below: Imports CrystalDecisions.CrystalReports.Engine Imports CrystalDecisions.Shared Public Class Form1     Private Sub Form1_Load(ByVal

  • IPhone 4S keeps crashing when trying to use camera

    Every time I receive a message my phone freezes, will not respond to the lock screen button or home button, every time I try to open the camera it crashes or crashes when I take the picture.

  • Error when trying to create a mirrored RAID

    I've never done this before, so I have no idea what this error is telling me: "Creating RAID set failed with the error: MediaKit reports block size error, usually caused by not being a multiple of 512." Any idea what to do here?