Ipod touch won't turn on, just shows the apple logo - even when plugged into Itunes?

I have an Ipod touch 8GB - it's virtually never been used. I have tried to charge it up but nothing happens - it just displays an apple logo. I have plugged it into Itunes but again nothing happens. Any ideas?
Thanks K.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • HT201210 I dropped my iPhone 5 and it doesn't turn on it just shows the apple and says to plug into iTunes.. then i restore it and it says error , what do i do to get my phone to turn on fully ?

    helpppp
    I dropped my iPhone 5 and it doesn't turn on it just shows the apple and says to plug into iTunes.. then i restore it and it says error , what do i do to get my phone to turn on fully ?

    See if this helps: http://support.apple.com/kb/TS3694#USB
    If it does not help, the drop probably damaged something inside the phone.

  • I dont know how to get my iphone 3g to work. it will turn on and show the apple logo then it goes black. itunes will not recognize it and it wont reset

    I've tried charging it for days. it doesnt do anything. I'll hold the home and power button for 10 seconds and it just shows the apple logo and then goes black. and when i plug it into my computer it wont recognize it.

    Does it charge when you connect it to the adapter? If yes, make sure it is charged for about 10min, then connect in recovery mode, shown here: iPhone and iPod touch: Unable to restore
    If still not recognized, try the troubleshooting here: iOS: Device not recognized in iTunes for Windows

  • Hi my ipod touch 8gb won't turn on just get the apple sign in middle of screen and my laptop also can't find my ipod wen i plug it in? any help would be greatly appreciated thank you.

    hi my ipod touch 8gb won't turn on just get the apple sign in middle of screen and my laptop also can't find my ipod wen i plug it in? any help would be greatly appreciated thank you.

    OR use this method
    1. Press-hold the Home button (big circle below the screen)and the Sleep/Wake button (on top of the iPhone) simultaneously.
    2. Continue holding both buttons (Ignore the"Slide to power off") until the iPhone shuts off and begins to restart.
    3.You may let go when you see the silver Applelogo.
    Thats all Folks!!

  • My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what can I do to start my iPad?

    My iPad is not charging when I pluged in and its keep turning off and on (it just shows the apple logo). I even changed the charger so what else can I do to start my iPad?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • HT4623 just updated my iPhone 4s to ios6, now my phone won't turn back on. The apple logo comes on and sits then shuts off. I have held down the home button and on/off switch several times to reset, but same problem persists.

    just updated my iPhone 4s to ios6, now my phone won't turn back on. The apple logo comes on and sits then shuts off. Then comes back on and just sits.I have held down the home button and on/off switch several times to reset, but same problem persists.

    Place iPhone on Wall Charger for at least 10 minutes. Then keep on charger and Reset, hold both home and power buttons until the iPhone begins to start, this can take about 20 seconds of holding both buttons while on charger. If still problem, open iTunes 10.7 on computer, connect iPhone to computer with USB Cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, then click Restore button of iTunes. If still problem, try DFU Mode Restore, here are the steps. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode can be difficult to enter sometimes, just keep trying. DFU Mode is a black, blank screen with iTunes saying Recovery Mode. If still problem and there is Warranty or AppleCare make Genius reservation and take to Apple for resolution.

  • My iPod touch is not charging it only shows the apple symbol

    My iPod touch is not charging it only shows the apple symbol

    See the not-charging topic of:
    iPod touch: Hardware troubleshooting
    Have you tried another cable?
    Another charging source? Does iTunes see the iPod when you connect to your computer?
    Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and cracked or broken plastic.
    - If not successful, time for an appointment at the Genius Bar of an Apple store.

  • MacBook won't start up it shows the apple logo and just keeps the "wheel" spinning

    MacBook won't start up it shows the apple logo and just keeps the "wheel" spinning

    Usually means that critical system files are corrupted. Start by:
    Boot into Safe Mode if possible. If it boots into safe mode, then restart the computer to see if it will boot normally. Otherwise, reinstall OS X. Unfortunately, you've not provided any information in your profile about what version of OS X you have installed.

  • So i tried updating my iphone 4 and my whole computer crashed and when i tried to turn it on, it would just show the apple logo and load, then turn off

    so i tried updating my iphone 4 and my whole computer crashed and when i tried to turn it on, it would just show the apple logo and load, then turn off.

    See here for
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • I just downloaded the software 6.1.3 on my i phone, 1 hour passed and it still didn't turn on. It just shows the apple logo on and off.

    I just downloaded the software 6.1.3 on my i phone, 1 hour passed and it still didn't turn on. It just shows the apple logo on and off.

    http://support.apple.com/kb/HT1808

  • HT201263 why does my itouch just show the apple logo and nothing else?

    i went into my settings to restore all data and content, and it said it might take up to 4 hours so i let it do that and when it finished it just showed the apple logo when i restarted my itouch, i can reset it any time but itll just stay in the apple logo screen, and i tried restoring my itouch but it said it wouldnt let me for some reason. what do i do?

    Because the iPod is sick.
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My daughter Nano just shows the apple logo and that is it can'y do anything with it.

    My daughters Nano just shows the apple logo and that is it we can not do any thing with it.

    Have you tried a reset ? Press and hold both the sleep and home buttons for 10 to 15 seconds and see if it then reboots - you won't lose any content, it's the equivalent of a computer reboot. If that doesn't work then you might better help in the iPod forum (this is the iPad forum)

  • My iPod touch 5th Gen. wont start up past the apple logo,ive tried holding the power button and the home button,and it wont start up. What do I do?!?!

    My iPod touch 5th Gen. wont start up past the apple logo,ive tried holding the power button and the home button,and it wont start up. What do I do?!?!

    Try the remaining items of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • When i turn on my itouch the screen tells me to plug into itunes, i do that and it tells me my ipod is in recovery mode and to restore it, i click ok and click restore then it does it all over again and nothing happens. what do i do?

    when i turn on my itouch the screen tells me to plug into itunes, i do that and it tells me my ipod is in recovery mode and to restore it, i click ok and click restore then it does it all over again and nothing happens. what do i do?

    Hi tgoit2015,
    If you are having issues restoring your iPhone, you may find the following article helpful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • My ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?

    my ipad 1 isnt working it is just showing the apple logo on the screen can anyone help me?
    If you can help me facetime me at [email protected] or msg me.

    It would help to know whether it ever did work, or is this a new iPad for you?  If new, you need to connect it to a Mac/PC that's running iTunes in order to register and initialize it.  If it used to work, try doing a reset.

Maybe you are looking for

  • Unable to connect error while connecting to more than one server in a cluster

              hi,           I have a weblogic cluster of two servers. The stateless session bean is deployed           on both these servers as well as the cluster. The weblogic used is 6.0 sp2. I'm           using a custom router class which redirects t

  • Problem with Texts in infoObject

    Hi guys, I have a infoObject with texts in two languages. If I sign into the system in EN language all texts are shown in EN. The same situation is with german language. Everything works fine. Now I have a new requirements where  the users want to se

  • Microsoft Word consistently becomes active window when clicking between dual screens and programs

    13" MBP 2.3 ghz i5 8GB Ram Running 10.9.2 Microsoft Word 2011 Dual screens with amazon Mini Display to VGA adapter When I am running word between an external monitor and my MBP, Microsoft word always interrupts any clicks between programs and between

  • How do i get to talk with a real person about my problem?

    I am thoroughly frustrated trying to navigate all this troublehooting nonsese online by myself. i paid for a product that is not working. how do i speak with a real person who can answer my questions???????

  • Jdbc adapter synchronization

    Hi experts, please help me. XI/PI 7.0 i have 3 dbf files. 1.dbf 2.dbf 3.dbf and i use 3 communication chanels to select data from each file and use it in my BP: jdbcChanel1 jdbcChanel2 jdbcChanel3. So, i do it consistently: Select data from the first